Vacuum cleaner SAMSUNG Repair engine Replacement
To disassemble the vacuum cleaner, you must first remove and remove all additional elements placed on the unit. Remove the bowl of the dust collector, under it is a filter. Two fingers and remove it. Remove the final filter located at the back of the vacuum cleaner. Then Unscrew all visible screws. They are located at the top of the vacuum cleaner. Remove cover. Under it we find 2 more screws. Twist them too. Gently remove the top half of the cleaner, pre-outsidenew harnesses from circuit Board cleaner. Watch that pads these wires are not clung to in special Windows for their installation.Then take out the unit with the engine and Unscrew it. Now with the old motor remove the power wire and the pad with the thermal relay. All this is installed on a new engine and collect the vacuum cleaner in reverse order. Good luck with the repairs.