Vacuum pressure system 1.7 cdti 2004-2009 z17dth z17dtl Astra Corsa Meriva Combo

Рет қаралды 66,667

Fix and Drive

8 жыл бұрын

Support the channel making a donation at www.paypal.me/...

Пікірлер: 23

@gurglejug627 5 жыл бұрын

brilliant video, excellent reference for fault finding - straight to the point. Thanks very much for putting it up.

@johnbeagmartin5809 3 жыл бұрын

Bloody brilliant help guys; bless you's

@ioanfejer3340 Жыл бұрын

Thank's a lot for these informations, they are really helpfull!

@gogutzy 3 жыл бұрын

interesting video - have to check my z17dth as well - i have huge crankcase pressure, but no power loss, no oil burning, absolutely no smoke (black/blue/white) out of the exhaust, the engine runs smooth - only thing that nerves is that it tends to leak some oil here and there after being driven hard. if i unscrew the oil cap on it, it can barely stand from the whole pressure (at idle).

@BedexBoy162 2 жыл бұрын

You are a legend

@jani1966mix 5 жыл бұрын

the best video ever

@maartendegroot9111 7 жыл бұрын

I have some troubles with my Astra's and your video's are very usefull! Only the vacuüm pump is driven by the multibelt trough the alternator! Thanks

@fixanddrive 7 жыл бұрын

no, it is not driven by the alternator. It is only fitted to the alternator. It is driven by oil pressure

@maartendegroot9111 7 жыл бұрын

Really, its not.. replaced mine twice. If you don't believe it search Google images on alternator z17dth

@fixanddrive 7 жыл бұрын

at 0:41 you have a picture of the pump, see it. You can see where oil lines fit.

@maartendegroot9111 7 жыл бұрын

Sry but that still doesn't do it. I was talking about that part of the movie in the first place. Now I looked up 0.41s, maybe you should do the same with my advise 👍🏻

@stephenbysouth9054 5 жыл бұрын

@@maartendegroot9111 Check this video: you can see that the pump is driven by the alternator shaft. The oil is used to create a seal helping the vacuum pump work (most air pumps use oil): kzfaq.info/get/bejne/pbaqptOLvqzVinU.html

@DerGolf2000 3 жыл бұрын

How much vacuum should be on the small vakuum port on the camshaft vacuum pump?

@02bajram 4 жыл бұрын

Hello Sir! i have an opel combo z17dth! year model 2006! I get no fuel pressure to the engine! I know there is no fuel pump in the back, but just in the front! The fuel pipes is not blocked... if i put preassure in gas tank i get diesel to engine! But sometimes if i spray starting fluid in the intake and crank the engine for 20sec or so it starts and i can drive without problems.. so the fuel pump is not sucking/giving fuel/pressure? But when the engine is running the fuel pump works fine?! please do you have any suggestion?

@DerGolf2000 3 жыл бұрын

Did you fix it? It could be the pressure regulator valve in the high pressure pump....common fail....

@adriandumitrascu4292 Жыл бұрын

leave it here for anyone is looking: that is most likely caused by air leak on the fuel filter or fuel line, most likely fuel filter is the wrong size, coz believe it or not there are different sizes. one that work well is PURFLUX C511

@martinburbridge7545 6 жыл бұрын

Hi i think i have a problem with my boost solenoid as when can is on and thottle is pressed car does not boost properly ebven now it has a new turbo but solenoid gets hot is this sign of failed unit

@antonymurry2024 6 жыл бұрын

Hi have a problem with my car vectra 2.0 c 2004 spanner light plus engine management light stays on as well won't go out changed air flow metre as well any suggestions thanks ?

@traynpetkov7155 5 жыл бұрын

very usefull tx

@gogu1989 6 жыл бұрын

how can I remove these valves?

@iznogudsultan 3 жыл бұрын

hello people. I need help. i have an astra h 2009 year 1.7cdti z17dtr 92 kilowatts. I have serious problems with her. constantly reports errors p0234 and p0235 to me. my turbocharger is as new as the vacuum valve. WHAT SHOULD I DO. PLEASE HELP. THANKS

@jainmechanic4916 3 жыл бұрын

Make be the inlet mainfold flap blocked

@iznogudsultan 3 жыл бұрын

@@jainmechanic4916 I don't know which specific entrance you think is blocked, but I've reviewed everything. complete suction and vacuum system but I couldn't find any obstacles. And all masters suspect an IAT sensor that is part of the MAF sensor even if it works properly.