Vader Solutions BMW N54 BOV Adapter Install/Testing!

Рет қаралды 28,830

5 жыл бұрын

In this video, I’ll share Vader Solutions BMW N54 BOV Adapter Install/Testing!
Vader Solutions BOV Adapter👉🏻vadersolution.com/products/vs-tmap-bov-line-adapter
Tools used for this DIY:
10MM 3/8 Drive Socket: amzn.to/2GGwVab
8MM 3/8 Drive Socket: amzn.to/2Kb9Yek
Torx Socket Set: amzn.to/2GpiqIq
2GrcACp
3/8 Drive Extension Set: amzn.to/2pXMpfx
CLICK HERE To Shop On My BMW Fanatic Amazon Website! Thanks for the support!👉🏻www.amazon.com/shop/bmwfanatic
BMW Fanatic Camera Setup ⬇️:
EVO GP Pro GoPro Stabilizer: amzn.to/2rwQS8r
Movo GoPro External Microphone: amzn.to/2pQT9il
GoPro Hero 3+: amzn.to/2nu73lA
SanDisk Extreme 64GB Micro Card: amzn.to/2nuogvlamzn.to/2nu73lA
GoPro Hero Head Band Mount: amzn.to/2ncvEht
GoPro Hero Window Mount: amzn.to/2mQFIvI
GoPro Tripod: amzn.to/2nu96pE
iPhone 7: amzn.to/2mQOucM
Don't forget to SUBSCRIBE here ⬇️👉🏻kzfaq.info/love/pryGOwpJzAv2grvhrkFbiw
LET'S CONNECT!! ⬇️
Instagram: BMWFanatic_KZfaq
BMW Fanatic Facebook Page: m. BMW-Fanatic-492134847819690/?ref=bookmarks
Thank you for watching! As always, please SUBSCRIBE to keep up on all of the new content, click the “Bell” logo to ensure you receive notifications, like and comment!
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Thank you for your support as it helps me grow and provide better content each and every video!
Music:
Instrumental Produced by Chuki
m.kzfaq.info

Пікірлер: 137

@BMWFanatic 5 жыл бұрын

I am giving one of these away guys if you haven’t caught my video here! 👉🏻 kzfaq.info/get/bejne/Z86lo5WqyMyxqWw.html Ends this Friday 😀

@trentwaldo Жыл бұрын

Just installed this, and it fixed everything car runs amazing now. Thank you!!! Running stock no tune, DCI, CHARGE PIPE AND TIAL Q 10 POUND SPRING, Car sounds awesome!

@donovanbustos1204 Жыл бұрын

Where you getting a engine malfunction error ?

@friguy4444 2 жыл бұрын

Oh YEA! Thumbs up for the USB method big time! I could NOT get that other one off and had to just remove the screws to get t off. Then I dropped one screw and now I have only one until I can get another.

@MrNicoe36cabrio 5 жыл бұрын

Great stuff Lee!

@jesusleal1496 5 жыл бұрын

Looks easy. Thanks bro. 👍

@ColoradoN5X 5 жыл бұрын

Sick DIY man, this is some good stuff from you!

@BMWFanatic 5 жыл бұрын

Colorado N5X thanks man!!

@anthonysantos2015 5 жыл бұрын

So happy i found this just broke the nipple off my intake manifold installing new vacum lines im a put a screw threw the hole with jbweld and use this for the bov already ordered through the link

@dodgehemi5045 5 жыл бұрын

broke your nipple , so that is why they recommend to leave that vac line alone and work with after the t fittings coming off manifold because nipple is weak

@anthonysantos2015 5 жыл бұрын

@@dodgehemi5045 yea n i broke it removing a brand new hose its super weak n brittle

@cw1824 4 жыл бұрын

I also broke mine off. I got a 1/4 brass one and threaded the intake and used marine sealant. Works great.

@speechclass3465 5 жыл бұрын

Great video but with the plug cover for the old 1/8 line came off so maybe a little jbweld to keep the cap on because it will come off like mines did last week.

@85mrnasty 3 жыл бұрын

So ironic your name is speech class. I have an eighth grade education I even I can understand that mine is both plural and singular. Dont need to ever look dumb by writing "mines"

@josevelasquez4959 5 жыл бұрын

Awesome!!!!!

@arbit733 3 жыл бұрын

Just ordered an adapter. Recently did new charge pipe with the TailQ bov. Is this what’s causing my low rpm surge/flutter? Hopefully the new hose fixes it!

@misterp4047 4 жыл бұрын

Great video and order it but bad communication with Omar from Vader Solution, has it on stock but after two weeks still no shipping. Maybe no luck for me but hope the product will make me happy.

@sanchezable 5 жыл бұрын

Do you have a log of before and after? Does it really minimize the spike at the shift point.

@firststrike4810 3 жыл бұрын

I have a 535i XDrive and just added a new charge pipe and Tial bov and the map sensor is now attached to the charge pipe can I place the adapter where the the map sensor is now and cap the nipple on the manifold and add the 1/4 " line from the bov to the adapter on the charge pipe? Right now I forced the 5/32" line on to the BOV nipple and ran it on the nipple on the manifold which is a 5/32" nipple. Yours sounds awesome!

@breakrebuildrepeat5321 3 жыл бұрын

I seen you run a arm charge pipe with a tial BOV and a forge charge pipe with BOV. Which one do you prefer?

@timothyjosephnicolas7336 4 жыл бұрын

Hi, what is the size of the aluminum fitting that goes into the adapter?

@A619D 5 жыл бұрын

Hey #BMWFANATIC Do you have a DIY for the oil pan gasket?

@seanpeterson862 2 жыл бұрын

Aloha, does the 1/8 cap to close the original vacuum line on the manifold?

@DSWGamingMCSG 5 жыл бұрын

Will this work with the stock diverter calves and the t splitter?

@LordNikonPL 23 күн бұрын

so there are 2 map sensors ? one on chargepipe and on on intake ?

@bobobobobobs 5 жыл бұрын

Man you doing all this diys, you forgot one the most important ones, the damn downpipes, that car deserves it !! :d

@dodgehemi5045 5 жыл бұрын

Inlets also, bms oil valve upgrade, front brakes, oil cooler....

@eturnulrs704 5 жыл бұрын

Great DIY. So what do u like more, the vent to air diverter or the BOV?

@BMWFanatic 5 жыл бұрын

Bklyns louder like them both and they sound the same 😀. I do like having just the one BOV and now with the proper line

@kostaspatrakoulakis8489 5 жыл бұрын

Hiya will this work on the 335d e90 buddy ?

@nikhilsoni1773 4 жыл бұрын

Does the kit come with a 1.8 vaccum cap off?

@fredfrederickson 4 жыл бұрын

12:19 using a regular garage door opener? Does your homelink not work?

@Teampicketts 4 жыл бұрын

Why does this say it only works on the Tial BOV on their site and not the HKS BOV?? I brokw my factory nipple and need an option!

@turbo8433 5 ай бұрын

How can you do this for the hks setup?

@TheFrozenJello 5 жыл бұрын

What’s the fitting that you used?

@anthonysanchez7455 5 жыл бұрын

Are you running catless downpipes?

@Qwickful 5 жыл бұрын

Good review and great video as always! Will this work the same with aftermarket DV? Was thinking the T-off that splits the line into 2 (1 for each DV) is small and tight and will restrict the vacuum anyways?

@BMWFanatic 5 жыл бұрын

Qwickful thanks! I don’t see why it wouldn’t work. Only thing is about what you mentioned and the t-off splitting. The DV’s don’t really need it (I never had any issues with mine for 4 years with my Forge ones)

@Qwickful 5 жыл бұрын

@@BMWFanatic Thanks for the input! Installed my TurboSmart DV (Plumb Back) a few weeks ago and have been experiencing some fluttering during low acccelerations ("normal driving"), not too bad tho, just a little bit sometimes. Have no problem what so ever during hard acceleration so not sure why that is. Maybe that is normal, I'm not sure :)

@dodgehemi5045 5 жыл бұрын

@@Qwickful , Try the Vader, JBweld on open caps

@dfhii84 3 жыл бұрын

Does this adapter come with the hose ?

@jakerisner4139 5 жыл бұрын

I haven't seen any of your videos for awhile but I thought you were running the BMS cowls to eliminate that giant pain in the a** factory cowl.

@austinstachura9422 5 жыл бұрын

Me too? Maybe he put back to show how to properly do install.

@matreyia 5 жыл бұрын

I deleted my cowl a year ago and it's been totally fine. No moisture at all, even during Harvey.

@fredfrederickson 4 жыл бұрын

One of the first mods I did and I’m so happy every time I have to do work in the engine bay because it saves me time every time

@bobcooper1583 5 жыл бұрын

Lee, I have lost track of your boost issue. What was the root cause of you not getting 18+ psi boost? You were doing so many things. Was it the diverter valves? Did you need the Forge BOV and Vader adapter to get there? Was there an aha moment where you found the magic boost you were looking for?

@shortz9604 5 жыл бұрын

That cap that unused on the intake manifold where did u cap that off it looked like a small black cap I wish u showed where that went I am gonna order this piece as I need it for my bov just stumped on what u capped off

@stephenlozano2816 5 жыл бұрын

Elin Trinidad buy a 1/8” rubber vacuum cap and secure it with a small zip tie

@dodgehemi5045 5 жыл бұрын

MHD cat fix, do that next. Ebay DP

@Trusty335is 3 жыл бұрын

Hey Lee, what screws are those that you used? I purchased this kit and it comes with some real ghetto hardware (fittings, lines & screws). I purchased better fittings and using the 1/4” hose the tial bov came with (if long enough idk yet). I just need better screws than what VS sends you which is some generic wood screws that don’t even fit into the adapter without some force. Thank you!

@407youngvn 2 жыл бұрын

Im trying to figure this out too, bro you suck at getting back to your viewers smh

@johnevery3022 5 жыл бұрын

Am I confused, did your fuel gauge move with the blow off valve ?

@Chris-oz7ix 4 жыл бұрын

Yes because of JB4

@setterlee 4 жыл бұрын

me: oooh look! my BOV need that my wallet: no, you don't...! xD

@davidtemple1 5 жыл бұрын

Have you tested the new BMS N54 BOV Vacuum Adapter?

@nikhilsoni1773 4 жыл бұрын

David Temple wouldn’t ths work in the same mannorG

@h0d632 5 жыл бұрын

Hey buddy, what is the spec (thread type size / barb size) of your 90 degree fitting between the adapter and the vacuum line?. Ordered mine from VS and it didn’t come with one .

@alteredsensations8273 4 жыл бұрын

mick hodgson dude literally me too

@mustafabulifa4221 2 жыл бұрын

Any update on the fitting???

@rong16 5 жыл бұрын

Where do I get the vacuum line fitting?

@alteredsensations8273 4 жыл бұрын

GDC dude mines didn't come with the fitting either

@n54 5 жыл бұрын

Hey just curious why you decided to remove the BMS cowl filters you had on previously and reinstall the stock cowl? Was water getting inside the engine bay?

@matreyia 5 жыл бұрын

I had it a year and still have it and no water at all. Even during Harvey...however, I cut my cowel into pseudo M3 shape so there is still SOME water barrier.

@fredfrederickson 4 жыл бұрын

I took mine off, threw it in the recycling bin and never looked back lol

@tommyguy55 5 жыл бұрын

im assuming this wont work with stock airbox because of the height?

@BMWFanatic 5 жыл бұрын

tommy hibbard I would have to ask if he tested for that or not.

@jamiesharretto4579 3 жыл бұрын

where do you get the fitting for the 1/4 line...vader sent me an 1/8 line quick connect ...that defeats the purpose of the Tial BOV...Please advise

@Idoit2324 3 жыл бұрын

Same thing happened to me man. Do you get in touch with them?

@mustafabulifa4221 2 жыл бұрын

Any update on this????

@LuisMartinez-bx3of 5 жыл бұрын

Why u never did a cowl delete , with BMS ?

@boomy818 5 жыл бұрын

Luis Martinez he did but looks like he went back to stock.. maybe because of water or oil smells

@ionlongid3756 5 жыл бұрын

How long did it take for your order arrive? I've read post on other forums that it took longer than expected.

@BMWFanatic 5 жыл бұрын

Ion Longid Like a week or so. I would follow up if you order and have questions on shipping

@matreyia 5 жыл бұрын

What's up with your gas gauge needle? something wrong?

@tvtvtvtv8217 5 жыл бұрын

matreyia highjack as a boost gauge

@rickeysmith3873 4 жыл бұрын

Does this kit come with the 1/8 cap for the manifold?

@rider251000 4 жыл бұрын

@youngeli1509 4 жыл бұрын

Rickey Smith no and it didn’t have the elbow either

@claurance2 5 жыл бұрын

Anyone have a discount code I want to order one.

@AndrewBMW 5 жыл бұрын

👍👌

@lpa187 5 жыл бұрын

Did this fix your boost issues? Are you hitting 20psi now?

@BMWFanatic 5 жыл бұрын

lpa187 I’ve been back on 93 octane and it’s winter gas, so have to wait until spring to run 100 octane again

@fazer12779 5 жыл бұрын

14:10 what’s going on with your fuel gauge & oil pressure?

@cdub3799 5 жыл бұрын

its the JB4. Once you start to build boost it changes to a boost gauge.

@synex5358 8 ай бұрын

So to be clear I DONT have to drill into my engine?

@BMWFanatic 8 ай бұрын

Correct

@AlwayzInTheLoop 4 жыл бұрын

anyone else selling these besides this vader solutions?

@aaronph8605 5 жыл бұрын

Where’d you order the 90 degree elbow from?

@ryantoney7052 5 жыл бұрын

Domino 86 did you ever find out

@aaronph8605 5 жыл бұрын

Ryan Toney nah but I ordered one from Amazon

@mustafabulifa4221 2 жыл бұрын

Can you post the link??

@paytonbarrow954 5 жыл бұрын

Ordered product a month ago, still haven’t gotten a delivery notice and I’ve emailed Vador solutions multiple times and still have not gotten back to me. Terrible Customer service and business

@cristianl1983 5 жыл бұрын

Same here going on 3 weeks. Got the product because of this video. But the vendor can’t come through with it. Emailed a couple times but no response.

@thomasmutuku7837 5 жыл бұрын

Ordered my about 2 weeks ago and no delivery yet? Looks like my $$$ gone to waste or rather scammed.

@thomasmutuku7837 5 жыл бұрын

It finally came, actually got the email & tracking within 6hrs of above, installed and the product is working great...Thanks ….Vader Solutions.

@Kushiimaru 5 жыл бұрын

3 months later and Vs STILL has shitty customer service and it’s been weeks since I ordered this adapter, multiple emails.... smh

@homeboyq3674 4 жыл бұрын

Same here as well. Ordered it November 4th and it’s now it’s coming up on November 20tj and it’s not shipped. An apparent back order is the issue. But I’ve been waiting too long for my expensive piece of fucking plastic

@Gendo3s2k 5 жыл бұрын

...why are they selling a $10 part for $100?

@betterwithblake 3 жыл бұрын

Discount code?

@woodssgaming7116 4 жыл бұрын

I bought it and my hose is completely different from yours. Mine is more of a plastic than rubber and also it’s the same size as OEM vaccuum line hose so it doesn’t fit around the BOV mouth and won’t stretch at all because it’s plastic not rubber.

@Swagory 4 жыл бұрын

i have the same issue

@woodssgaming7116 4 жыл бұрын

Swagory so I figured out they give you 2 hose connectors/fittings and you’re supposed to take off the connector on your BOV and replace with one of theirs! I felt so stupid when I figured that out lol but nonetheless, it got the job done. Hope I helped bro

@Swagory 4 жыл бұрын

The hose looks so skinny tho

@Swagory 4 жыл бұрын

I was just gearing up to go get a new brass fitting and hose from the hardware store

@georgetattoos2331 3 жыл бұрын

@@Swagory how that fitting upgrade go them gave me a elbow that could only go on that cheap tiny hose?

@4x4runr 5 жыл бұрын

I noticed in the site that it’s additional $30 for the hose??

@mglax13 5 жыл бұрын

The hose and the fitting. Still seems steep since you can get nice 6mm silicone hose for like $1.50 a foot and a 1/8" NPT x 1/4" barb fitting for about $5. All in all, you can get more than enough hose and a fitting for under $10.

@4x4runr 5 жыл бұрын

Matt Grilo thank you for confirming this ! I use this website for the hoses: Verociousmotorsports dot com For both hose and fitting it’s less than $9 for 5 feet of 6mm hose and one 3mm cap. You can also chose your color of red blue and black (hoses only)

@mglax13 5 жыл бұрын

@@4x4runr Exactly the same place I used for my hoses as well. I also purchased 20 feet of 3.5mm and replaced all my vacuum hoses with the stuff from Verocious. Highly recommended, especially for older and high mileage vehicles. Those rubber hoses tend to crack and fail.

@HoboJIm117 5 жыл бұрын

2 weeks ago I ordered one and it haven't shipped out and Omar hasn't responded 😭 fun times

@wpg1977 5 жыл бұрын

HoboJIm117 Total jerk off . Takes money and strokes people . Terrible way to do business . I am still waiting as well .

@bulldogarmy2876 3 жыл бұрын

I’m still waiting as well

@Trusty335is 4 жыл бұрын

Did your adapter come with everything you needed?

@DwFab 3 жыл бұрын

Nope it’s a rip off . Don’t buy it . Better off tapping the manifold . Read my recent comment . And after researching I found I’m not the only one with this issue