VALLEY TRANSPORTATION !!! RGN's/FLATBED WHAT ACTUALLY HAPPENS WHEN PICKING UP AT A SHIPPER !!!

Рет қаралды 12,527

5 жыл бұрын

HEY GUYS, In this video I try to show all the steps that happen when picking up a load at a shipper. The load will be a John Deere 770GP motor grader, 39000 lbs. It was listed as 8ft 10inches wide but we stuck the blade under the main body of the grader. So you get to see the flags and banners being put on but I took them off before leaving...
OPEN TO CONSTRUCTIVE CRITICISM !!!
PLEASE SUPPORT TRUCKERSFINALMILE.ORG
CHECK OUT MY WEBSITE AT TRUCKER2CHAINS.COM

Пікірлер: 52

@1205kalli 2 жыл бұрын

There's a flatbed like that in Europe, too. But with such a cool truck, the loading is really exciting. The motor grader is also interesting. Thanks for the video

@HomeOverTheRoad 3 жыл бұрын

Awesome bro...Im making the switch from flatbed to rgn...a bit nervous, but excited for the cool loads.

@Trucker2Chains 3 жыл бұрын

Just take it slow... Don't let anybody rush you and double check everything !!! Stay Awesome !!! Trucker2chains

@JoeLabrincha 5 жыл бұрын

Great Video! Love you're comment on the sign at the front bumper....fits.you well and would like to see it first hand!

@Trucker2Chains 5 жыл бұрын

Im in truck 1704 now... If you see me stop by and Chat !!! Thanks for Watching !!! Trucker2chains

@thistruckerslife 5 жыл бұрын

Flatbedder/ youtuber looking to go to heavy haul. Video was very instructive thank you.

@Trucker2Chains 5 жыл бұрын

Hopefully you checked out my other videos !!!! When your ready to get into heavy haulin shoot me a email at trucker2chains@gmail.com Until then keep up the good work on your channel !!! I will give you a shout out in a video coming up.... Trucker2chains.com Trucker2chains

@garykemp6436 3 жыл бұрын

I can remember the first time I operated a Cat 14H I had spent thousands of hours on a Cat 16G and the park brake was between the gear shift it took me 15 minutes to work out how to get the park brake off on the 14H push the gear lever down to get it out of park

@Trucker2Chains 3 жыл бұрын

Half of the job we do is just trying to keep this stuff straight !!! 🤣😅🤣 Took me 30 minutes to get a mid 80s dozer started one time !!! Trucker2chains

@strpped379 5 жыл бұрын

Nice vid...I hoping to start Valley mid March. Im over the noise of running blowers all day.

@Trucker2Chains 5 жыл бұрын

I really appreciate the comment !!! How did you hear bout Valley ? If theres anything I can help you with or questions I can asnwer shoot me a email at trucker2chains@gmail.com . Put Valley in the subject line !!! I wish you all the best !!! And keep watching these videos !!!! Trucker2chains.com

@overland_the_great_escape23 5 жыл бұрын

Good job! Keep it up. Keep the videos coming

@Trucker2Chains 5 жыл бұрын

I wlll... And Thanks for Watching !!!

@raymondgibbs8565 4 жыл бұрын

Sam DeBoer traitor 😂

@johnfrank2882 5 жыл бұрын

What criticism?? Looks like you did a good job tying it down. That’s the only machine we sell that can hurt itself! Don’t tear the steps up turning the blade to unload it...... Come see me in Hobbs America soon! Be safe!!

@Trucker2Chains 5 жыл бұрын

I was supposed to deliver something to Hobbs but another driver beat me to the pickup !!! Should have crossed the chains on the front !!! But I did after scaling at the T/A... Be Awesome Today!!!

@MrBigR928 5 жыл бұрын

So if i wanna step it up to the next level in my career, I'm gonna have to give up these Jolly Rancher Jelly beans so i can fit under the trailer and disconnect those lines? Wait, let me think about it while reaching for another hand full if these dang blasted jelly beans!😋. I gotchu locked in 2Chains so lets git'er done 👍

@Trucker2Chains 5 жыл бұрын

Actually fell out the long distance rockin chair, cause I had me a handfull of jelly beans readin your comment !!! Somehow, some way Im gonna incorporate these jelly beans into the video !!! I appreciate you having me " locked in " !!! And I appreciate you Watching !!! Trucker2chains

@linderjohnson2713 5 жыл бұрын

Looks like you made the "grade" A+

@Trucker2Chains 5 жыл бұрын

Thank you !!! Trucker2chains.com

@1997cr80r 5 жыл бұрын

Well done boss

@Trucker2Chains 5 жыл бұрын

I appreciate you taking the time to watch !!! More talking in the next one..!!!..

@1997cr80r 5 жыл бұрын

@@Trucker2Chains Awesome!!! I'm subscribed buddy I'll be watching everything!

@howardsmith1111 3 жыл бұрын

Quick question - at 21:48 you secured the rear "hydraulic piece" (rear ripper), but you did not do the same for the front ripper. Is there a reason why this would not be necessary for the regulations [I know it isn't going anywhere!] Thanks.

@Trucker2Chains 3 жыл бұрын

Technically, YES...It should have been done... Truthfully, I'm not sure if I overlooked it or if it was done later off camera... Sometimes I am just trying to get out of there quick... If I remember correctly, I knew I had to move it because my weights were not right. But I didn't have time at the shipper to do it. The truck stop was less than a mile away.... Good catch though !!! Trucker2chains

@mrmicah04 5 жыл бұрын

Nice video... I'm going rgn Friday,any advice for being safe and overall tips?

@Trucker2Chains 5 жыл бұрын

First tip... When you are all done hooking up, chaining down, etc... take a deep breath and walk around your whole truck and trailer... Take that extra minute to check your stuff again.... I like to do that to help me relax a little before I start to drive.. .. and you never know what you might find.. Hope that helps at least a little... Good Luck !!! Trucker2chains

@WhiteLinesBlueSkies 4 жыл бұрын

Is there a reason you didn’t cross chain the front and rear? Having done this work for a wile now, is there anything you would have done differently? Thank for sharing! WLBS Ken

@Trucker2Chains 4 жыл бұрын

Oh my Goodness !!! Had to rewatch this...lol.... Yes, I would cross the chains on the rear of the trailer, front of the machine.....( I didn't because I was trying to get some reaction in the comment section ) Crossed them at the Truck stop after I scaled... ( good catch though ).... I think with all that's going on with the rear of the machine I would still do it the same... Any thaught's ? The permit no permit for tire bulge is a hot debate... Some state's don't worry about it and some do...?.... And lastly, as far as doing anything different now that I have been doing this awhile...... I would get in and drive that Bad Boy like I stole it !!!! 🤣😅🤣🤣😅🤣😅🤣..... Really appreciate the questions !!! Glad somebody is going back through the " archives " ....😁 Thank you !!! Trucker2chains

@robertbleazard7145 5 жыл бұрын

Get yourself some 6ft chains made if your going stay so much easier.

@Trucker2Chains 5 жыл бұрын

Stayin till they fire me !!! Lol... Working on the shorter chain thing !!! I appreciate the tip !!! And the view !!! Trucker2chains.com

@stevenmurata4392 5 жыл бұрын

Great video, lots of securement. What's each chain/binder rated at? Total has to be 1/2 the cargo weight? When are you delivering it to our farm, lol?

@Trucker2Chains 5 жыл бұрын

Hello Steven.... Securement has to be minimum 49% of load.weird I know.. should be 50%....chains are rated at 6600lbs each.... anything over 10000lbs needs at least 4chains , 1 at each corner... Im pulling in this morning, 2 eggs and some hashbrowns and some bacon would be great while Im unloading...😁 More vids coming !!! I really appreciate you watching !!!

@stevenmurata4392 5 жыл бұрын

@@Trucker2Chains Thanks for reply. Breakfast for life, lol. Ever run out to L.A., CA(traffic is bad)?

@Trucker2Chains 5 жыл бұрын

I do... Breakfast forever sounds awesome... If you ever need something picked up and delivered give Valley a call... request me and then I can get that breakfast !!! Lol...

@johnharper2677 Жыл бұрын

So, I'm wondering if we can get in contact with each other. I'd like to learn what you know. I left a comment in one of your other videos that I will be starting Valley this coming week. But, I'll be starting on a step. Question though. Will I always have to load my own trailer? And, I need to know the securing points for a motor grader

@Trucker2Chains Жыл бұрын

trucker2chains@gmail.com Shoot me a phone number... 2CHAINS

@justinmoyers1179 Жыл бұрын

Do you still currently work for Valley?

@OfficialBiziBoatRecords 5 жыл бұрын

How much experience do you have to have to work for valley transportation?

@Trucker2Chains 5 жыл бұрын

Whats up nick... 1 year OTR. Some common sense and willingness to learn....We do have a training guy for securement and if you have any questions after orientation... If you have any other questions for me email me at Trucker2chains@gmail.com and put Valley in the sublect line... And as always if you put a app in tell them 1735 sent ya !!! Thanks for Watching !!! Trucker2chains.com

@donovandixson4576 3 жыл бұрын

Crist Cross

@jonhester33 2 жыл бұрын

Never understood why people freak out if they have to use a mechanical detach? Not that hard lol

@bradmyers3327 4 жыл бұрын

Hey now. I just subscribed. What would be your ideal tractor to pull RGN? I'm looking to buy. Thanks

@Trucker2Chains 4 жыл бұрын

The simple answer would be.... The Newest, most fuel efficient, lightest and highest HP rated truck you can afford... If you can get into a truck that will last long enough to use to pay it off, then run it with no payments and save save save....... No matter what, I would NOT buy any truck without $10,000 in a account for repairs, no freight, vacation/time off etc..... Also, I might wait a little bit.... Right now as unstable as the market is, it may not be the best time to start out.... Just some advice........ By the way, THANKS FOR THE SUB !!!! I Highly suggest binge watching ALL my videos !!!!!😁😁😁 Trucker2chains

@bradmyers3327 4 жыл бұрын

@@Trucker2Chains yep. I just started watching them. I haul milk in MD and it's been steady but I'm ready to do my own thing eventually. I ran lowboy for 8+ years before that. Everyone says freight rates are super low right about now anyway. Would you get 40,000 rears with 3.55s?

@Trucker2Chains 4 жыл бұрын

@@bradmyers3327 I believe we are specd at 44k rears.... also not sure about the gear ratio... bout 1700 at 75mph... I pull some hills in the northeast and out west down to 10-15 mph.... Definitely would want high torque/HP motor.... You can always talk directly to the dealer and spec a truck specifically to your needs.... or they can find a used truck already specd to the use you have intended for the truck....

@bradmyers3327 4 жыл бұрын

@@Trucker2Chains last question for today I swear.......what is your wheelbase? Like 265-270?

@Trucker2Chains 4 жыл бұрын

Lol.... 285 No Worries... Trucker2chains

@kevinguffey1564 5 жыл бұрын

Dont check the anti freeze? Exhaust boot?

@Trucker2Chains 5 жыл бұрын

Not everything makes the video...check the oil.... hydraulic fluid.... The exaust boot protects the turbo from debris, rain, dust etc... Thanks for watching !!!

@kevinguffey1564 5 жыл бұрын

Trucker2Chains the theory on covering the exhaust is not just debri but wind and air if the engine is not running oil is not getting to the bearings and it will burn a turbo up, by the way valley is a great company, i used to work there

@Trucker2Chains 5 жыл бұрын

22.05 and 23.42 shows exhaust cover... By the way, on this New Machine... Under 10hrs on meter there is a foam seal inside the exhaust that burns away slowly over the First 10-15 hours the motor is running. Comes out as ash a little at a time... So on new machinery the exhaust cover is just for extra insurance... I put them on everything I haul... 0 liability 4 me... Thanks, Keep watching !!! And checkout trucker2chains.com !!!