No video
2002-2006 Toyota Camry Engine Rebuild | Putting The Engine Back Together
Рет қаралды 46,236
2 жыл бұрынIn this rebuils series we are putting the engine back together on this Toyota Camry.
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoff...
🛒PARTLS LIST:
➦ Piston kit with rings: amzn.to/3vR4AcD
➦ Rod bearings: amzn.to/3ugMYWZ
➦ Crank main bearings: amzn.to/492jYky
➦ Crankshaft thrust washer: amzn.to/496OwSb
➦ Lower gasket set: amzn.to/4bdElNy
➦ RTV sealant: amzn.to/3SxlkhZ
➦ Assembly lube: amzn.to/3ua1pMD
➦ Timing kit: amzn.to/492lfYS
➦ Water pump: amzn.to/3OiAK70
➦ Head gasket set: amzn.to/3Oh76PF
➦ Head bolts: amzn.to/47J6NUE
🛒TOOLS:
➦ 1/2 Impact: amzn.to/3Sfmiht
➦ Impact socket set: amzn.to/3Hy3fKi
➦ Ratchet and wrench set: amzn.to/4b6K8ob
➦ Electric ratchet: amzn.to/3Sw4W12
➦ Prybar set: amzn.to/3IkSlWw
➦ Ring compressor: amzn.to/3Sbfq4G
➦ Torque wrench 1/4: amzn.to/493Xr70
➦ Torque wrench 1/2: amzn.to/3AgaOB2
➦ Crank holding tool: amzn.to/3yslzRH
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.
@Z-Ack 3 ай бұрын
Got lucky on the head bolts.. i got to the last son bich and stripped out the threads at like 50° on my last turn.. so had to take the head back otff buy new head bolts, new gaskst, and the timecert kit to drill out every damn head bolt hole., some bull..
@alandust2188 2 жыл бұрын
This series has been great!
@ValleyMobileAutomotive 2 жыл бұрын
Thanks Alan 👊
@lovemorechinkubala5393 Жыл бұрын
@@ValleyMobileAutomotive the
@JuanDiaz-vm1pv Жыл бұрын
What a great video. Thank you so much for taking the time to explain the steps in such a clear way and show the work. Must one of the best videos on the platform. I'm now subscribed!
@ahmadghosheh3104 Жыл бұрын
Excellent video. I love the power steering pump trick. I usually use a 3/8 extension to push them back but that's a lot easier especially when the engine is in the car and almost no room
@ValleyMobileAutomotive Жыл бұрын
Thanks Ahmad! This was a fun rebuild. It's relaxing putting an engine back together 🙂
@xESPplayer500x Жыл бұрын
Fyi you should assemble crack shaft first and assemble pistons on engine stand using cope straws
@flyingman358 Жыл бұрын
very detail. good job!
@ibcrypto6139 6 ай бұрын
You did a great job and even went back when you realized you may have missed things! That where many fail, (including me). I am in the process of replacing the timing chain cover after a blown head gasket and stipped head bolt threads. With the RTV on the Timing Chain cover I noticed some apply RTB to the edges of both side corners where the head meets the block. One person applied RTV before putting the head on. Just on the corners. Did you have any leaks?
@h2o40fpv Жыл бұрын
Great video men thank you .
@pricesteve8948 3 ай бұрын
Excellent.
@user-gj1lb3it2w Жыл бұрын
I'm working on a 2AZ engine and 2 spacers fell out of it. Can you advise me where they are to go...have you ever had this problem before
@bobthrasher8226 Жыл бұрын
I heard you can't hone out Toyota 2azfe blocks? If you need to do that you should replace the engine. Is it just not economical in general or some other reason? I thought they don't have steel cylinder sleeves - just alloy aluminum? Are the new pistons a Toyota product for this engine or aftermarket?
@klauscottonswab2322 Жыл бұрын
Is this the 2AZ-FE 2.4 Litre ? I thought you couldn't Hone these because they were a 1 time use block? Could someone clarify this please? I have a 1AZ-FE 2.0 Litre from a 2006-2008 Toyota RAV4.. planning for a rebuild.. But I can't get a clear understanding if you could use a Hone to put in a new Crosshatch?? OR... that it is a "1 time use".. Some have " Cast Iron Cylinder Liners", other have the "Spiny Type Cylinder Liners.. (Whatever the last means? " Spiny Type.. " Hope someone can elaborate on this.. Cheers!
@MICHAELLOPEZ-us9fb 7 ай бұрын
Where can I get those computer specs? Please help me out.
@bobthrasher8226 Жыл бұрын
Did you do the cylinder head-bolt inserts job? I thought those threads were a weak point in 2azfe engine?
@ValleyMobileAutomotive Жыл бұрын
Hey Bob, you're right! These Toyota engines had issues with weak threads. The block was taken to the machine shop and they made sure the threads were in good shape. When installing the head bolts I had no issues with the bolts clamping down and torquing properly.
@bobthrasher8226 Жыл бұрын
Did the head get machined or just cleaned? I heard machining VVT heads can mess up VVT timing.
@ValleyMobileAutomotive Жыл бұрын
Yes, the head was machines at the machine shop. The amount of metal that actually gets removed is very little. This will not affect the operation of the vvt system. But just like on any head there is a tolerance limit to how much you can machine 👍
@DesiAutoRepair 4 ай бұрын
Hello sir where i find that book which we see in the video
@JuanDiaz-vm1pv 11 ай бұрын
Great video. Thanks. Do you have the torque spec for the bolts on the oil pump for the Camry 2AZ-FE engine. I would appreciate that. Thanks again!
@JavierHernandez-ji3ol 9 ай бұрын
THAT LOOKS LIKE MY BEDROOM
@ValleyMobileAutomotive 9 ай бұрын
Haha 😂. #busy life
@JohnWick-yk9vu 3 ай бұрын
Where do you get the instructions on the website?
@joshcwest Жыл бұрын
When replacing the rod and crank bearings, do you not need to use a plastigauge to ensure the tolerances are right?
@ValleyMobileAutomotive Жыл бұрын
Hey Josh, good question. The machine shop did all the measuring and ordering of the bearings, pistons and rings. Since they are more experienced in that area than I am I deferred to their expertise. I just installed them 🙂
@stevelangston2359 Жыл бұрын
What happens when the chain breaks?
@itsjiraheta Жыл бұрын
thanks for the series of videos. so, what do you do with the old pistons? if the machine shop gave you new ones? Can those piston be reused in any other engine or they are scrap metal?
@ValleyMobileAutomotive Жыл бұрын
They said the rings were seized in the grooves. I imagine they got scrapped. Unfortunately that's what happens a lot in the automotive world. A lot of waste is produced in old parts.
@shikanyota Жыл бұрын
Was there a TSB for loosing oil, and what was the fix?
@ahmadghosheh3104 Жыл бұрын
Long time ago but expired.
@Gwaplord3957 Жыл бұрын
Hello sir, thank you for the video. Question for you,: After you drain oil at 50mi, do you fill back up with more Break-in oil or is this when you switch to factory spec oil? Thank you again!
@xandecampos2557 Жыл бұрын
What would be a far price for Gasket Set ? Which website/ store would you recommend me for buy it?
@ValleyMobileAutomotive Жыл бұрын
If you live in the States I would recommend rockauto.com. They have a great selection of parts and kits for this job 👍. As far as brands FelPro, Melling and Mahle are good. I don't have a lot of experience with EngineTech but other people say good things about them.
@xandecampos2557 Жыл бұрын
@@ValleyMobileAutomotive I’m in West Virginia. Thank you very much.
@serginiosussenbach9990 9 ай бұрын
Why not a asbest head gasket metal head gasket can't stand to much pressure
@ZeneelPugh 4 ай бұрын
About how much $$$ In parts and machine work
@ValleyMobileAutomotive 4 ай бұрын
If you do most of the work yourself the parts plus machine shop will be around $1k.
@florenciovidalmaybenitez7454 6 ай бұрын
Hello ,what about the piston its any special size or are standard
@ValleyMobileAutomotive 6 ай бұрын
Standard. Unless you have the cylinder bored out larger. I have a parts list in the description.
@robertpeters9438 2 жыл бұрын
mounts. You state approximate cost? What hoist, rigging is required?
@sulekhajaan9807 Жыл бұрын
Thank you sir But where frome
@mohamdalbawardi 6 ай бұрын
How do i get access to the manual you're going by?
@ValleyMobileAutomotive 6 ай бұрын
I am using Identifix. It's a monthly subscription for shops. There are some DIY options like Alldata diy it's also subscription based. I haven't used it so I'm not sure of it's quality.
@mikelunsford2587 2 жыл бұрын
Can balance shaft be repaired without pulling the engine? I've got a 2005 2.4 with lots of engine noise, no oil leak no water in oil, but a vibration and hard knocking. Not sure yet what it is as in trying to determine what to do next. Ty
@robertpeters9438 2 жыл бұрын
Have you verified spark, fuel injector, and compression leak down consistency? I.e. do you have a week cylinder? That can shake a 4 cyl right out of motor moumts.
@mikelunsford2587 2 жыл бұрын
It's definitely either a broken piston or ?? Not sure yet. Definitely a hard break. But I've ruled out ignition, fuel, motor mounts, transmission, and oil pump. But I'm not sure if the engine would still run if a half shaft had problems.. I know it'll run with a vibration and miss with a broken piston. Hard knock is key here.. I could always pull coil packs and check if pistons are moving.. but I thought maybe someone would have an idea
@ValleyMobileAutomotive 2 жыл бұрын
If you want to look at the bottom end you can pull the oil pan off. I think the exhaust needs to be lowered in the front. You can get to the balance shaft and I think 3 connecting rods. Number 4 rod is under the case half and not accessible. If it's a rod knock you may have to pull the engine to repair it.
@xandecampos2557 Жыл бұрын
Well done. How do I get manual?
@ValleyMobileAutomotive Жыл бұрын
The one I use is Identifix, it's only worth the price if you work on a lot of cars. Here are a couple other options... www.alldata.com/diy-us/en www.eautorepair.net techinfo.toyota.com Hopefully this helps 👍
@xandecampos2557 Жыл бұрын
Thank you sir.
@MillerEngineeringInc Жыл бұрын
Nice where can i get the manual?
@zigawad6974 Жыл бұрын
I want the book sir
@user-cj8dr8ri3y Жыл бұрын
Woo
@mohamdalbawardi 6 ай бұрын
What kit
@ValleyMobileAutomotive 6 ай бұрын
Links for all the needed parts are in the description 🙂
@billaSantiago 5 ай бұрын
I want to I want to join you
@sulekhajaan9807 Жыл бұрын
I am machanic sir i need jop But im in work ksa in this time
@mohabiraq1 4 ай бұрын
way too much rtv
@passion830217 Жыл бұрын
Mine is at 169k miles. I am thinking at what mileage the poor car needed a new engine.
@ValleyMobileAutomotive Жыл бұрын
This had around 280k! It was burning oil. Other than that the inside looked really good.
@ahmadghosheh3104 Жыл бұрын
When the engine burns as much oil as gas lol. Serious though, if it runs and doesn't burn much or any oil then don't touch it.
@passion830217 Жыл бұрын
@@ahmadghosheh3104 Mine burns oil about 1 quart 1000 highway miles (60-75 mph). It does not burn at city miles (under 50 mph). It burns about 1 quart in 1800-2000 mixed miles. I change the oil at 3.5k miles (high mileage oil +20% lucas oil treatment)
@elliottbutts153 Жыл бұрын
@@passion830217 I would just continue to drive it and maintain it like you are. 1 qrt per 1k miles would have been considered acceptable by Toyota even when it was new. I believe you are still in pretty good shape. Just be sure you are checking and adding oil accordingly.
@JuanDiaz-vm1pv Жыл бұрын
In my 2005 Camry LE, same engine, 250K miles, head gasket failed and oil and coolant mixed. So I would only do this repair because of the leak. If your car is not showing any sign of damage, don't bother.
@sulekhajaan9807 Жыл бұрын
Sir you need helper boy
@shikanyota Жыл бұрын
Spanner boy... They call them
Valley Mobile Automotive
Рет қаралды 49 М.
ABRACADABRA TV
Рет қаралды 8 МЛН
Valley Mobile Automotive
Рет қаралды 12 М.
The Car Care Nut
Рет қаралды 7 МЛН
The Car Care Nut
Рет қаралды 991 М.
Rainville Creative
Рет қаралды 32 М.
JM Auto Repair
Рет қаралды 17 М.
Peter Finn the Car Doctor
Рет қаралды 60 М.
Garage 54
Рет қаралды 4,3 МЛН