This video is one of the best ive seen. I followed the procedures to the T, used the supplied excel calculator, replaced the shims and now she's running like new again. Thanks Chris!!!
@steveriddel24366 ай бұрын
Fantastic guide. I'll be doing the valve check on my Thruxton for the first time myself and this video has given me the confidence that I can do the adjustments if necessary.
@VincentBalek3 жыл бұрын
Thanks for this very help full tutorial 👍, I did this maintenance yesterday and everything went without any trouble. The excel shim calculator file was great as well. Good job
@ryancooper43813 ай бұрын
Great video! Straight to the point without all the extra babble that most seem to have!
@bobmitchell9995 Жыл бұрын
Well made video, concise, to the point, accurate and very helpful. Many thanks.
@SuckBangBlowRepeat2 жыл бұрын
Nice man! Excellent video with all the pertinent details! Thank you good sir!
@ramoncruz99103 жыл бұрын
Thank you. This was very helpful. I will be doing this inside my garage thanks to you. Excellent video. Thank you. 🤙👍
@artgibson8505 Жыл бұрын
Excellent video. Thanks for being on point and concise.
@juliekohler41063 жыл бұрын
Thank you for being clear and concise. I’ll be referring to this video a few more times before I dive into my project.
@maloneparado766811 ай бұрын
awesome video! excel spread sheet is gold
@kmattar2 ай бұрын
Thank you for the great quality instructional video
@tylermcdonald89656 ай бұрын
Wow killer video dude! Great work!
@strapped2time Жыл бұрын
Great video. Thanks for sharing your knowledge.
@SeanBietz3 жыл бұрын
Nice video, best I've seen on the subject!
@JulietHotelFoxtrot4 жыл бұрын
Excellent video.
@privatetom5 ай бұрын
Love you man! That's it, life saver!
@bertsbike2 жыл бұрын
Great video! Learned a lot!
@Hoodeene Жыл бұрын
Thank you for this Video!! Now i know i have to go with my Thruxton 1200 2019 to the Workshop. I cant do this at home :-)
@andreasfalt86913 жыл бұрын
Well produced but you lost me at ”remove the camshaft” 😅 Think I will support my local workshop instead...
@gamlebardun Жыл бұрын
Its worth the first part and just check! If all is good, no need to send it to a workshop😊
@javierdiazgonzalez7952 жыл бұрын
Man great tutorial but there is one thing you've made wrong!! ATTENTION. When you replace the washers of the valve cover, you put them upside down. THE COPPER PART HAS TO BE FACING UP!! This make sense taking into account that above it there is a screw.
@bernibeckmann9753 Жыл бұрын
Very helpful. Thank you.
@gdslick3 жыл бұрын
Good video, thanks
@woodly106911 ай бұрын
Hey Chris, nice video, very informative and it gets a thumbs up from me. Can I ask what year Binnie this is? It's a beautiful machine!
@fdevries36475 ай бұрын
Awesome
@rosstisbury16263 жыл бұрын
very helpfull thanks
@mcboomboom00782 жыл бұрын
Super well done! Great job and thank you. What year Bonneville is that? I’m getting ready to do this to my ‘01and I’m wondering if those clearance values are the same as the ‘01…
@robducharme79012 жыл бұрын
Can a zip tie be used instead of the bolt you ground down? Thanks for the video!
@romanbarrera77772 жыл бұрын
I WATCH YOUR VIDEOS FROM MEXICO CITY, SOME DO HAVE SUBTITLES OTHERS DO NOT, I WOULD LIKE THIS COULD YOU PUT SUBTITLES BECAUSE MY ENGLISH IS NOT VERY GOOD AND I AM SOON TO DO THE VALVE ADJUSTMENT ON MY TRIUMPH SCRAMBLER 865 CC AIR-COOLED GREETINGS AND THANKS FOR THE GUIDE
@flirtingdisaster3 жыл бұрын
Ha, this is an IKEA Hammer!
@GergelyPal. Жыл бұрын
I would like to ask what is the tightening torque of the camshaft holder bolts?
@johnnysprocketz3 жыл бұрын
legit
@garydavis2265 Жыл бұрын
Great video,I dread shim valve adjustments. My question,and it might be incredibly stupid, why is this called a SOHC,there are two cams,right? What am i missing?
@littlewicky1 Жыл бұрын
It's a DOHC, since like you said there are 2 cams.
@garydavis2265 Жыл бұрын
Ok,I have a 2023 street twin 900,it is a sohc according to the literature. Is that an air cooled bonneville you are working on? Does my bike have rocker arm activation? This is my first non Japanese motorcycle
@garydavis2265 Жыл бұрын
And thanks by the way
@littlewicky1 Жыл бұрын
@@garydavis2265 it looks like you are right. The engine in your bike is a SOHC. My understanding of the Street Twin was to be an more inexpensive bike than the Bonneville.
@garydavis2265 Жыл бұрын
After doing a little research it appears that all 2016 and on bonnevilles are sohc
@SteelJM12 жыл бұрын
Crikey, this is why i hate shim and bucket style valve actuation. I may need to adjust the rocker arms on my bike more often (though that hasn't proven true yet) but it takes all of ten minutes and two tools.
@robinrobinrobinwong3 жыл бұрын
when would a timing chain replacement be needed?
@critterIMHO Жыл бұрын
Believe it or not, this is why I will never own another Triumph. Screw type valve adjusters are just so much easier to deal with.
@gamlebardun Жыл бұрын
Is the new t120 valve check and shim replacement the same?
@NatsWorkshop2 жыл бұрын
How did you line the backlash gear back up mine shifted slightly on removal like yours did
@JamesPhillips-xi8kt6 ай бұрын
Mine just moved half a cog. What did you do?
@gfranks5080 Жыл бұрын
Hi Chris. The spreadsheet app is saying I can view only. I sent a request to be able to edit. Is there anything I'm doing wrong to not be able to edit or add my own data?
@ChrisIronhardt Жыл бұрын
Hi - you can click File -> make a copy for your own editable version.
@haippics2 жыл бұрын
There is no gasket to replace on the valve cover? Or is there any?
@ChrisIronhardt2 жыл бұрын
You can replace the gasket on the valve cover. I just reused my old one because it was in good shape. I have not had any leak issues since doing this maintenance 18 months ago
@JohnDoe-he2yf Жыл бұрын
How many miles did this bike have on it
@edisonyoukhana50353 жыл бұрын
How do I get access to shim size calculator (spreadsheet) thanks.
@ChrisIronhardt3 жыл бұрын
You can click File -> Make a Copy
@edisonyoukhana50353 жыл бұрын
@@ChrisIronhardt Thank you.
@JacobVaughan11 ай бұрын
Reason i don't buy Triumph...Massive drama of taking cam shafts out / verify timing just to adjust valves. lol no thanks.Give me a screw tappet or hydraulic lifter anyday.
@Super2wheeler3 жыл бұрын
Why can't you just buy new factory shims? Why do you need to get special ones with different thicknesses? I have 24,000 miles on mine and never checked them yet.
@StRYCH9ofFOCR3 жыл бұрын
The factory shims are not one thickness across the board. Manufacturing tolerances make it necessary to use an array of thicknesses for the shims to get the clearances correct. With miles on the engine, you must now factor in wear. The only way to get them right is through the measuring and calculating process. My bike is at 15K miles and it appears that the valve adjustment was never done. I will require four new shims on my adjustment. It really isn't hard to do.
@Super2wheeler3 жыл бұрын
@@StRYCH9ofFOCR Thanks for the info. My bike is running fine. Maybe I'll do the work this off season.