Valve Cover Gaskets, Spark Plugs & Ignition Coils on a 2005 Lexus ES330

Рет қаралды 4,255

7 ай бұрын

Replacement of the Valve Cover Gaskets, Spark Plugs & Ignition Coils on a 2005 Lexus ES330 3.3L.
Valve Cover Gasket Set:
amzn.to/47Jtngg
Intake Manifold Gasket:
amzn.to/47oTt8D
Spark Plugs & Coils
amzn.to/40T4tIX
VRP:
amzn.to/3QVzh7r
----------
Please make sure to Like, Share and Subscribe, your support really means a lot to me!! If my video helped you fix your car, please feel free to share it and help me get my channel out there to others 😊
Please consider making a donation:
square.link/u/8M0jwdQR
----------
I am a self taught mechanic of over 30 years in the field. Helping people save money and stay safe on the road is what I am here for. If I can pass that along in my videos, that would make me feel even more accomplished. I am rather old school and do not really do things by the book, for this reason, I do not claim to make "Instructional" videos. My videos are for entertainment purposes only. Please use safety and knowledge when doing your own repairs. ~ Ben - MegaMiles
MegaMilesBen KZfaq:
kzfaq.info/love/lqmUsPtFA-
MegaMiles Business FB:
/ yourprivatemechanic
MegaMilesBen Facebook:
/ megamiles.ben
MegaMiles On Google:
g.page/r/CW-OpD44GHz-EA0
----------
#megamiles #megamilesben #yourprivatemechanic #denver #colorado #mechanic #mechanics #auto #automotive #repair #shop #garage #tools #partnumber #partnumbers #diy #howto #athome #savemoney #remove #removal #install #installation #replace #replacement #change #swap #switch #torque #specification #specifications #whereis #location #located #torquespecs #2004 #2005 #2006 #lexus #es330 #valve #cover #covers #gasket #gaskets #leak #leaks #valvecover #valvecovers #intakemanifold #sparkplug #sparkplugs #ignitioncoil #ignitioncoils #ignition #coil #coils #tune #tuneup #4thgen #4thgeneration

Пікірлер: 38

@danieljdoggett 5 ай бұрын

I've watched several videos on this procedure, and yours is the best -- torque specs, helpful tips, and you show instead of tell. Most guys just point to something and say, "Now I'll remove that" or "There were three bolts I had to remove." Thank you. Now to do it on my own 2005....

@MegaMilesBen 5 ай бұрын

I appreciate that, thank you!

@ulisesserna6155 26 күн бұрын

What a good work! thank you for sharing the process on how to replace the cover gasket, spark plug and coils.

@MegaMilesBen 26 күн бұрын

Thank you for watching!

@hygienistiam 2 ай бұрын

You’re awesome! I love how you show what you’re doing, yet sped up, while telling viewers through the wording on the screen more important information!!❤❤

@MegaMilesBen 2 ай бұрын

Thank you! Thanks for watching!

@martymeyer4125 5 ай бұрын

thanks for all the tools and close ups of those hard to see nuts, bolts and connectors!

@MegaMilesBen 5 ай бұрын

Thank you for watching!

@markb3129 7 ай бұрын

The first value cover gasket you set on the workbench sounded hard as plastic. Always great to see a mechanic use a torque wrench when reassembling fasteners. ✌🏻

@MegaMilesBen 7 ай бұрын

Yea they were pretty old for sure. The seals were really stuck in the covers too. Took some working to get those out. Thanks for always watching!

@markb3129 7 ай бұрын

@@MegaMilesBen I always enjoy them

@kcCapo 6 ай бұрын

Ben thanks so much for this video. wish you were located in the bronx NY... now in the search for a ES 330. I found one today with alot of oil leakin around the engine and decided to walk away..

@MegaMilesBen 6 ай бұрын

Always follow leaks up. Its not uncommon for most leaks to be valve cover leaks. High rpms makes them leak cause theyre such a light torque. Thank you for watching!!

@patrickzadd5215 5 ай бұрын

nice job I’m impressed by your attention to detail…..

@MegaMilesBen 5 ай бұрын

Thank you!! Thanks for watching!

@eric1053 6 ай бұрын

Great video

@MegaMilesBen 6 ай бұрын

Thank you for watching!

@JuanOrtiz-ej1nf 5 ай бұрын

Awesome vid! 🎉

@MegaMilesBen 5 ай бұрын

Thanks for watching!!

@francoiscamara9383 6 ай бұрын

Damn you’re good you’re too good

@MegaMilesBen 6 ай бұрын

Thank you for watching!

@stevenw2866 4 ай бұрын

Very helpful. Thanks

@MegaMilesBen 4 ай бұрын

Thanks for watching!

@stevenw2866 4 ай бұрын

Did you use motor oil to lube the six tube seals when you installed them in valve covers?

@MegaMilesBen 4 ай бұрын

@stevenw2866 yes. I do the outer and inner edges.

@stevenw2866 4 ай бұрын

Thanks for the reply

@anglsevyn 3 күн бұрын

Question... In many other videos, there is a step that requires getting to a bolt on/near the rear cover from underneath the vehicle. Did you have to do this as well?

@MegaMilesBen 3 күн бұрын

My video shows my entire process. Im not sure about that, I do a lot of Toyota valve covers and tune ups, cant say Ive ever had to go under the car for the job.

@manishgv 2 ай бұрын

Hi @megamilesben - I have been putting off this repair for a while, and will not be able to (due to personal reasons). In the meanwhile, I want to just re-tighten the valve cover bolts (carefully, to torque specs) to reduce the leak, and get by for a few months by topping off oil every 2 weeks. What is the easiest way to access the REAR valve cover bolts without taking off everything? Can we access the bolts from the bottom of the car, or is it necessary to take off the plenum? Thanks for the excellent video!

@MegaMilesBen 2 ай бұрын

You need to remove the plenum so you might as well just do them.

@svrblk777 4 ай бұрын

Hi, did you take the half moon plastic off and put gasket sealant? thanks!

@MegaMilesBen 4 ай бұрын

No, I only do if theyre leaking or if Im doing a head gasket job. I dont like to disturb them otherwise.

@remogaggi82 3 ай бұрын

Those coils still working?

@MegaMilesBen 3 ай бұрын

Yes, as far as I know. My clients provide their own parts.

@Gooose1309 3 ай бұрын

How much did you charge customer for this job? Just wondering I'm needing mine done

@MegaMilesBen 3 ай бұрын

I dont discuss labor prices on youtube. My little shop is discounted for the community and my clients provide their own parts. My prices dont compare to other shops, sorry. Book calls for 3.5 hours for just the valve cover gaskets.

@Gooose1309 3 ай бұрын

@@MegaMilesBen I got quoted $690 for a water pump, timing belt, alternator, serpentine belt and tensioner pulley. With me bringing all the parts. Is that fair you think?

@MegaMilesBen 3 ай бұрын

@Gooose1309 depends on location and going labor rate. Probably. Toyota timing is usually about 6 hours book time.