Vanquish Products - Currie RockJock axle install for the Axial SCX10 Honcho and Wraith Rubicon JK

Рет қаралды 87,617

Күн бұрын

A Quick Overview and install of the new Currie RockJock axle system now available from Vanquish Products.
If you would like to purchase these parts used in this video please click below:
VP Full front axle kit for the Axial SCX10:
www.vanquishproducts.com/cuscf...
Full rear axle kit for the SCX10:
www.vanquishproducts.com/cuscr...
VP Titanium link kit for use with the Currie axles and 8 degree knocks and hubs for the SCX10:
www.vanquishproducts.com/cuti1...
8 degree knuckles for the SCX10:
www.vanquishproducts.com/vp-8-...
8 degree chubs for the SCX10:
www.vanquishproducts.com/vp-8-...

Пікірлер: 47

@EvolVillainRC 11 жыл бұрын

really soon, test units have been out for a bit so it should be a matter of days.

@xonox0 9 жыл бұрын

Thanks a lot! This helped me a great deal in figuring the link installation.

@EvolVillainRC 11 жыл бұрын

lol I'm pretty sure I was the first person to put dirty tire tracks across that bridge! It looked too awesome not to use it. I had no idea who made it though :)

@Rickstar993 11 жыл бұрын

Awesome video. Very informative and well made. I like the shots of it cruising across the bridge that I made. I was watching this, and I noticed that it was recorded at goathill, then I saw my bridge! Ha, thanks for putting it in the video. Lol. Great video, bro. I'm looking forward to the 2013 season to start up.

@MichaelLeeUSAFRetired 10 жыл бұрын

Excellent How-To!!! Now I can purchase and install mine!!!

@EvolVillainRC 11 жыл бұрын

The kit is only for the Curries at this time. But they sell custom lengths so you can order up what ever you need to piece one together.

@EvolVillainRC 11 жыл бұрын

they are coming!

@EvolVillainRC 11 жыл бұрын

SCX10 tubes fit SCX10/AX10 knuckles. The Wraith tubes will use Wraith chubs and Knuckles.

@juttschallenger 11 жыл бұрын

Very nice axles.

@rcweltproduction 10 жыл бұрын

The best axles ever!

@LucaMassarimassaboss1997 11 жыл бұрын

Fantastic axle

@chalinp4886 9 жыл бұрын

can I one be used for 6x6 is there a kit

@EvolVillainRC 11 жыл бұрын

Those are the OMF 1.9 beadlocks available from VP

@RCMC 10 жыл бұрын

Very Nice!

@MSLAGLE663 11 жыл бұрын

love to see those on a wraith

@csab1hd1 11 жыл бұрын

And a pink, used servo arm!!! God Bless....

@kimclussor 11 жыл бұрын

Im assembling the curry axles for my wraith now =) I got the black 1's :D

@neonhomer 7 жыл бұрын

Would be awesome if Vanquish made a version of the Tom Woods driveshafts...

@EvolVillainRC 11 жыл бұрын

With the right custom links I'm sure they could be used on about anything. However VP doesn't offer a direct bolt on link set to allow this at this time.

@bestamerica 10 жыл бұрын

' part 3,,, how come this truck dont have 4 lift spring shocks

@Wanted1069 Жыл бұрын

Yup. You need to re release these...

@bestamerica 10 жыл бұрын

' part 2,,, what country make this axial truck

@kyleroberts5061 11 жыл бұрын

the links are 3/16" in diameter

@Rickstar993 11 жыл бұрын

Yeah, that was my first one. It's got tracks all over it now. Lol

@crawlhardrc7852 6 жыл бұрын

Are these axles still available? Only ones I can find are the F9s

@chalinp4886 2 жыл бұрын

How about a trx 4 currie diff cover

@waynedizzle1 11 жыл бұрын

Yea do they use same style hubs n knuckles I just got all the vp ones that would suck if I' have to buy all them again

@ToulKorkMan 10 жыл бұрын

Are the lower link mounts included in the kit? I just ordered the Currie Axles but didn't get the lower link mounts. Also, could you please make shipping to Cambodia available?

@rcrehab9623 6 жыл бұрын

Do they still have these axles? I can't find them for the scx10

@waynedizzle1 11 жыл бұрын

when will they have a set for the wraith..

@imemovengeance 6 жыл бұрын

Do they give you anymore ground clearance?

@deerhunter8618 5 жыл бұрын

I have a very important question please give me an answer back has y'all cvd's ever been black as none as axle shafts for scx10 because I went to my local job hobbie store which is great and got a pair of your axle shafts and thay r diff then the 1s thay show on eBay or anywhere else please answer my question

@65BAJA 10 жыл бұрын

Should have made the inner pinion bearing a 5x13.

@TheABSoLooT1 10 жыл бұрын

So sick...

@MrAwesome832 11 жыл бұрын

Can i install the titanium links on my scx10 with stock axels?

@WhiskeysPaw 11 жыл бұрын

Can these be used on your VP chassis? Can the steering be used on the back of the axle like i have on my crawler?

@XNightHawk93 11 жыл бұрын

Do they have to be upside down?

@bestamerica 10 жыл бұрын

' come with 2 ball bearings on the axle big gear at 340 to 350

@0ffroadking 11 жыл бұрын

Will the 8 piece titanium link kit that vp offers work on stock scx10 axles or specifically the currie axles?

@craigtreeguy 10 жыл бұрын

Yea what links . Do you make scx 10 jk links ?

@jonboyncrew4818 10 жыл бұрын

As an instructional video, why do you install the front housing cover on the rear axle and the rear cover on the front axle?

@EvolVillainRC 9 жыл бұрын

jonboyncrew There is no front or rear cover, they are interchangeable.

@jgmbx1017 10 жыл бұрын

I'm in the process of making a rwd. 4 link truck. What speeds are these rated to? Are there optional gearsets?

@jaredanthony8070 10 жыл бұрын

any gears that will fit an scx10 will fit these and I don't theres any need to worry about to fast

@jimmymangat9296 11 жыл бұрын

What size links

@kyleroberts5061 11 жыл бұрын

thats a Robitronics servo arm and its red the camera can be deceiving.

@Wanted1069 Жыл бұрын

Cool.. ya think... MAYBE you can fire up the CNCS and make a few more thousand sets? Askin for a whole damn community of crawlers.... Please. N Thanks..