i dont mean to be offtopic but does someone know of a trick to log back into an Instagram account?? I somehow lost the login password. I appreciate any assistance you can offer me.

@Dax Chase Instablaster :)

@Miles Rudy i really appreciate your reply. I found the site thru google and Im waiting for the hacking stuff atm. Seems to take a while so I will get back to you later when my account password hopefully is recovered.

@Miles Rudy it worked and I actually got access to my account again. I am so happy! Thanks so much, you saved my ass !

@Dax Chase no problem =)

you can download it for free. But you need the original adapter to connect your PC to the ECU of the car. Thats 400-500 € ...

wiki.ross-tech.com/wiki/index.php/VW_Passat_(3B)_Brake_Electronics_(Bosch_5.7)

Donde puedo encontrar los códigos para un seat Altea 2007 tdi me estoy volviendo loco y sin dirección y no me deja calibrar

@@witold2452 2012 SKODA OCTAVIA ? THANKS

yup

Lo pudiste solucionar?? Yo estoy igual que vos pero con una tiguan.

Great information, question i have vcds and trying to perform the coding for someone who replaced a used oem not bosch but still oem but they did away with their previous module. The vcds is reading the new / used but it is not offering the coding button!? Any insight will be appreciated.

Creo que la.mayoria estamos acá porque se nos borraron los codigos anteriores. Y estamos buscando la.solcucion para generarlos

Lo pudiste encontrar?

Solution of this problem is to try another program and diagnostic cable which will reach a smaller ping because this

You should try with VCDS LITE/ VAG 409.1 from aliexpres :D

the solution is to change the workshop number. for example 12369

@@witold2452 its nothing to do with what you just said. You've either changed the number on the soft coding when you've initially went into option "Coding-07" on the 03-ABS brakes module. You've opened long coder then unchecked boxes you shouldn't have so it's reset the short/soft code to 00000. This is visible in the vid so is not an opinion but a fact. The absolute only other way you can VCDS to give you this same problem is if you don't do an autoscan and lose the ABS long coding either by messing about with long coding helper and hitting escape button so it accidentally applied the new long code and thus long code would not take to your modules so offer up a "incorrectly coded" warning, or you've accidentally unchecked or checked one of the "Installed" modules on the Can-bus options screen. This will remove the soft coding to 00000 on the ABS and not bother even attempting to insert the long code as its not being asked to provide that number anymore since you unchecked one of the "installed" modules by accident or even messed about with one in the Can-bus and forgot to run the codes before pulling out the module or you didn't close and go back or you simply didn't have a clue full stop. Which one is it? Because its certainly not caused by the polling/ping excuse you just offered, the controller had full control of the module mate its on the vid as visual proof that it did.

Also see the intermittent fault you can set it to poll less frequently get away with faults but guaranteed this fault was the wiring at the connector down under the headlight that caused it. Common on UK golfs and can be fixed by cleaning out and inspecting for bare wire. If no bare wire the only thing needed is cleaned connector. What can also cause it is the front pad wear sensor wiring going black and the signal it causes somehow rots out one of the main under bonnet fuse box main live tails which in turn causes Radio antenna fault/rear door circuit electrics fault and causes abs and steering faults on the models that use the abs sensor ring on the hubs to determine the tire pressure warning (TPMS) and the traction control. I hope this all makes sense as on the soft coding a 00000 entry is a big no no it means you haven't went through all the coding byte options and disabled the first part of the module that subsequently allows for when you uncheck the options you seen on the first page or opt to enter a code manually it will always result in a value higher than 00000.

Que numero pusiste ??