On most controllers it's mapped to the loop pad page If that is the case on you controller you can simply use the arrows on the padpage to switch all 8 loop lengths to be shorter or longer

What is "the VK skin"? is that another skin under extensions?

It's a setting: dialogColorTheme

Klaus Mogensen I’ll check that out - might have seen it, but was uncertain about its function - now I know! Thanks for that info! Should do a video about it!

So that the tone pitch changes with the bpm changes? Switch master tempo off. The easiest is to click the "MT" in the bpm box on each deck, but you can also change it in the settings

For me Auto gain on No +Remember zeroDb = -3 DB is my usual setting, but on some "hot" controllers it's -6 db

Klaus Mogensen Thanks Klaus so remember off you recommend

Not a setting that I know of. But your grid has to be pretty much perfect on the track, because they build on top of that

What do you want it to do?

@@klausmogensen8691 it is only working on the B side of the crossfader for all channels 1 & 2.. I want it to work normally

@@dmacjoj That doesn't sound like a mapping issue. That sound more like a DDJ-1000 setup issue

Ok thanks ..

Hmm. There is really no such thing as cue master out. There are cue out and master out. And a settung to send some of master out to cue (for mixing), and to automatically switch cue on current channel (on load - that was the one you found). But if you are experiencing getting cue output set as master, you may want to look at your audio config. We can't really do screenshots here. So maybe come to the VDJ support FB group where it's easier to help you?

@@klausmogensen8691 yeah thanks but no need to search forums as i found the issue like i stated already , it was the auto head phones setting causing a problem with my reloop mixon 4 .

Yes, that's the same

Yes. There are probably more ways than one to do so, but for instance you can simply map: load & play But usually you would probably use the automix feature for that kind of behaviour

@@klausmogensen8691" load and play", can I find that in setting or that's a setting I would have to map myself, if so can you show me how to.

@@bushkashy Map it youuself YOu can do it on anywhere you like Like on your controller, on a keyboard key, on a custom button or on a pad page Simply put in: load & play If you still need more info mayb watch some of my other videos - I map something in most of them Or maybe go to the VDJ support facebook page - itøs easier to get help there since screenshots and so on can be posted But again: Load & play may not be what you want - maybe take a look at automix

@@klausmogensen8691 what I really want is load sync and play. I have times when I want to play extra fast, so as I load the song I would like for it to start playing immediately.

@@bushkashy Most people would probbaly do that by creating tracks that holds the different segments you need in one audio file and then use hot cues to do it

changing the video skin setting to nothing will turn it off: setting 'videoskin' '' Regarding the video itself that is normally just the video window that you turn on and off using simply: video So if you want a button that always turns on the video output window, but without the video skin, you can use: video ON && setting 'videoskin' ''

@@klausmogensen8691Thanks for your quick response. It's not the video window that I wish to turn off and on, I want to keep the video window on but send black to it, like when you move the channel fader to 0 the screen goes black, and turn off the videoskin. I want to be able to toggle that state on & off with one button, instead of going through all the steps manually.

@@wahloss It actually only goes black if you link it to the audio, but I think that is the default setting The action command to turn the level to 0 un the current deck would be: level 0% So you could then combine it like: setting 'videoskin' '' & level 0% But a better option may be to set the video source to "none" Combined, that would be: setting 'videoskin' '' && video_source_select 'none'

@@klausmogensen8691 Thanks very much! The first one " & level 0%" works fine, only it kills the audio as well, but I guess that's how the software works with the audio linked t the video. Will have to live with it. Have to restore the video manually by moving the channel fader to 0 and back to 100%.