Ve Cummins ( 89-93) Cummins upgrade series Part 1

Рет қаралды 12,035

3 жыл бұрын

Well here is part one for the ve guys out there.
Step one
Make sure the engine is in good shape. All fluids / filters are new etc
The air filter in these trucks is a good size to make the power most guys will make with there truck. But you can put some hole in the box if you want.
On to some cool parts
4 inch turbo back exhaust
Gauges ( pryo and boost )
Fuel pin ( performance one just google it )
Rpm spring ( 3200rpm )
If your a non intercooled truck you could look into intercooling the truck.
I will add could more things on the start of the next year

Пікірлер: 31

@jeremynichols3891 3 ай бұрын

Great videos! Just aquired my first 12 valve and am greatful of videos that arent about the p pump!

@CUTTERUPROB 3 ай бұрын

I working on a bunch of dyno video in the power levels of the ve. You must be interested in those up coming

@ebeegeebeefofeebee3181 2 жыл бұрын

Thanks for giving us VE pump guys this vedio. Look forward to Part 2 and the starwheel info.

@CUTTERUPROB 2 жыл бұрын

Coming soon!

@digitalbilly Жыл бұрын

I LOVE THIS VIDEO, I have a land cruiser with a VE pump and now i can tweak my fuel!!! AWESOME! thanks ROB!!!!

@CUTTERUPROB Жыл бұрын

Going to have a bunch my ve stuff coming soon.

@123suzukisamurai Жыл бұрын

Excellent. I am a new owner. This is very informative. Thank you

@EngineKrahnicles 11 ай бұрын

love your stuff man. can't wait to do this on my squarebody cummins swap

@CUTTERUPROB 11 ай бұрын

I will be doing a bunch of ve videos when the dyno shows up

@2eyedjack433 3 жыл бұрын

Hello, I found your channel yesterday and sub after the 2nd vid I watched! You got some good content here. I been working on my 89 first gen. And got a 96 parts truck that I'm going to pull off the intercooler and hopefully the turbo is ok. I was run out of oil. But lots of good parts for cheap. Ill be watching for more vid. Thanks again.

@CUTTERUPROB 3 жыл бұрын

Thanks for watching ! the intercooler can be made to work. on the turbo if the turbo was ran out of oil I would atleast do a kit in it make sure it good inside.

@StuartHaight 10 ай бұрын

I have the bmw 524td (usa) timing advance is electronically controlled via a frequency valve that stops or flows fuel onto the timing spring. I would love to convert my pump, or just buy a cummins idi of close specs but has mechanical timing advance. Due to electronics, two being #4 needle lift sensor and crank position, without those it defaults to 10deg advance after engine start. Technically its more fuel efficient.....when all sensors work. Thanks for posting your knowledge.

@TheRoyalBavarian 2 жыл бұрын

Thanks Rob. I've learned a little more each time I watch.

@lukemonson320 2 ай бұрын

could you make even just a like a 2-5 minute video on grinding down the top of the ve housing pls

@CUTTERUPROB 2 ай бұрын

I am into doing ve stuff right now so going to have a bunch of videos on this in the next couple months

@jesserasso1042 3 жыл бұрын

On those pumps you can turn the gear one tooth clock wise to advance it a lil more

@CUTTERUPROB 3 жыл бұрын

Yes you can

@jesserasso1042 3 жыл бұрын

The timing gear sorry

@CUTTERUPROB 3 жыл бұрын

i know what you meant

@jesserasso1042 3 жыл бұрын

@@CUTTERUPROB I no I just don't want to here it from somebody else your good

@CUTTERUPROB 3 жыл бұрын

@@jesserasso1042 lol ya i hear ya

@user-fb4di8rr4e 4 ай бұрын

Boss pelay bayad pa convert from Hyundai tci to mechanical ?

@dieselsquad6521 3 жыл бұрын

Hey Rob hope all is well. Could you please do a video of removing and reinstalling one of these ve pumps? And timing of the pump? Thanks a lot!

@CUTTERUPROB 3 жыл бұрын

I will be doing a. Bunch of ve videos. Right now I don’t have a truck that has a ve engine in it. But I might mock one you to for display.

@dieselsquad6521 3 жыл бұрын

@@CUTTERUPROB ok that would be much appreciated because I can’t seem to find a good video on it. Thanks so much!

@CUTTERUPROB 3 жыл бұрын

no problem

@Chevota22 2 жыл бұрын

Appreciate the info! I have a question... If I have an intercooled ve pump and put non intercooled delivery valves on it, can I run that on a non intercooled engine and be pretty close to the original output?

@CUTTERUPROB 2 жыл бұрын

Yep or swap the injection line. That’s the only real difference

@Chevota22 2 жыл бұрын

@@CUTTERUPROB awesome, thank you!