Thanks man 😊👍

Thanks Steve 😊 it was good to have calm water at 8.30am,normally always choppy here

Hi,thanks 😊 ,sure is plenty to choose from

@@paulcooper7162 yes that's for sure. I have a fto11 hull, been thinking about building with some spare parts I have laying around

@@jeffr.1219 FT011 😊 I tried with that boat it's seems to like a heavy lipo like 4000mah,ones I had only handled well when I fitted 4082:motor and big 6s lipo

@@paulcooper7162 yes I've seen your videos of it, that's what made me think of it. I let my kid rob parts off it, for his arrow. I mainly run my TFL boats. Been building a few arowanas, seen the ft11 hull sitting there, figured why not? I had a 3450kv 2960 in it at one time, which I ran on 5s 4000mah. Spun the metal shaft, broke the black plastic keeper off the back of transom. That's when it got put on shelf and sat

@@jeffr.1219 That alot of rpm for 5s.I do like the look of the FT011,mine always took in alot if water and I never could find the reason 😊

Thanks 😊does better on 6s 👍I've been watching out for your vids

@@paulcooper7162 haha, I haven't touched any of my rc's for ages I'm been constantly working on my road car lol, i need to get back out with them

@@iLouieTube I can understand that,RC cars are great fun without the danger of drowning 😊

Hi 👍 I custom made a motor mount for the 3126 2200kv motor outrunner ,made it from the white plastic power board and a spare front mount 36mm motor cooler or can buy a wee motor mount with water cooler superglue in to hull and remove the stock mount and fit a 4mm flex cable and strut if fitting this motor

Hi 😊 they seem to get hot so I went for a lower KV motor Mitoot 3126 2200kv outrunner,130A ZTW ESC and 4-6s lipo same setup as my blue rigger.Yes prop size can make or break it

Sounds good,yes 4mm is strong as boat is light ,I only used a small lipo about 1800mah

4mm 👍

Hi,only things stock are battery mount,trim fins,trim tabs It has a 3126 2200kv Mitoot chrome outrunner much same size as Vector SR80 1750kv silver black motor, Mitoot motor loves 6s voltage