Now for a viper alarm to finish it out 😜🤪😂😂😂👍🏿💪🤘🤘🤘🤘

By the way those 6384 190kv bkb motors are more than ok 190kv doesn’t make it specifically for 12s because it is used on 10s also and Hoyt is using 6384 190kv motors on the Hoyt dadbod at 16s9p p42a so you should have no problems at all if the motors die I would reccomend going with reacher motors 🙌🤙🤙

⚡🤙🏼 *Stooge is an absolute genius!!* 🤙🏼⚡ Lotta hardcore riders love his trucks... pretty epic build man 🤙🏼

Nice. Coming back later to finish watching. I remember us talking about the build a few weeks back. Looks good. Digging the longer hair. 🤘🏾

So happy with how the Heatsink came out! Badass build dude!

Epic build

That's dope Dallas.

That was a great amount of info! Thanks for the insight!

17:18 I recommend using the highest kv you can gear back down to your desired top speed. higher kv motors typically handle higher amperage. going lower kv throws that power range away.

This was super good dude! Still mega jelly...

Great build doing an srb build too cant wait to get my lipos to test it out (8s unsensored inrunners with the stooge race wheels)🤘🤘

What the top speed you have hit the on it? Dream board 🤤

Congratulations on such an EPIC build my friend. It looks great, and you look good riding it! Hope you have many trouble free and fun miles on that thing.

I would love to see a video on how to set up the direct drive

🎉🎉🎉🎉dude board looks good, sounds like an absolute beast!!! Love that heatsink 💪those 3 links are awholenother beast bro i love racing on em.

Can you use carveboard slick tires? Good idea? Gokart tires

Nice build any specific reason why you didn’t go with a panel mount sensor connector like a Gx-16 6pin connector opposed to going with the mr30?

That really beautifully executed. couldn't you ask tomiboi when making your deck to make the back and front end a bit longer to be able to house your trucks better so that an extention would not be needed. How much did you end up spending all together

19:03 i've found a mini grease gun (like park-tool ) makes the grease maintenance easier.

Just a quick question, what bearings did you use for the wheels?

Where do you go to get the de Vega

Would like to try this type of trucks, but man, I like in EU and they are so expensive after shipping and taxes. Hope someone can build them here 😔

Hey mate, what about the rebound, I understand that those 3links don’t rebound to center, do you feel it, is it bad?

Awesome build man, great job! I just left you a FB comment on this because there are a lot of similarities in thinking process to the build that I am doing now. Just curious what the aviation connectors are that you mentioned in the "keeping it real"? MR-60 and MT-60 connectors are the only ones that I've found in that amperage range. Also one note... Do you know what your xlr charge port can handle for amps? On my first build I was going to try a few different connectors but they were all pretty low amp capacity. I got a 12A charger so I ended up going with an xt30 connector to handle that level of charge. Before you make the jump to a high output charger, you might want to double check what that port is rated for. The one I was using originally was 13A, but I wanted a higher margin of safety and didn't want that to heat up which is why I went to an xt30

What ratio are the drives ?

Damn dude! That turned out nice! It’s the same type of build I’m looking at doing this spring. You even picked the same deck and battery size I want. Lol. The only thing I want to do differently is the trucks. Nothing against the race trucks (that’s a different build after 😉), I am looking more towards something like the Torqueboard 218’s or the flipsky 16” rkp or something similar. I like my Ecomobl ET front truck a lot but the rear won’t work with belts so the search continues. Maybe a hyper truck kind or trampa set up. Who knows. Did you have to adjust the bioX for your set up at all?