Рет қаралды 3,500
Very Rusty Hammer- Restoration || Perfect Restoration.
In this video I am restoring a very old hammer.This hammer has an iron handle. this hammer is in very bad shape.
I had this hammer for a long time. I thought it should be restored now. Restoration work of this hammer started by removing the hardened clay from the hammer. After cleaning off the hard dirt, I used a wire brush to remove loose rust from hammer. I applied a 12 volt current to remove all the rust. After cleaning, there were marks on the hammer and the front part of the hammer is badly damaged. All marks on hammer have been cleaned with a file. To rebuild front of the hammer, a piece of iron is welded to the front of the hammer. After this, the extra weld on the hammer cleaned with a file. Sanded with a 120 grit grinder to clean up the file marks on the Hammer.After that I have started hand sanding in which I sanded with 220 grit, 320 grit, 400 grit and 100 grit. Then buffed the Hammer.
I used neem wood to make the handle of the Hammer. This wood is very hard and strong. I made the shape of the handle. And then I started hand sanding the wood. 120 grit 220 grit 320 grit 400 grit hand sanding. Used Lacquer to polish the handle.
I really enjoyed working on this project though.
Work I do in the video and what I use . If you want to ask any question, please ask in the comment section. I read everyone's comments and try to answer.
Subscribe for more of my content. I'm uploading videos about Restoration.
Thanks For Watching:-)
#restoration
#restore
#asmr
#ayazrestoration