My tape maysure

Veto has a 5yr warranty on all their bags. Been using their bags for over 7yrs now and I can testify that their quality & reliability is a force to be reckoned with. Also remember Veto covers multiple trades and offers multiple bags and all kinds of sizes. Its like a blue collars candy land.

"i dont know why the put these small loops". 5 minutes later "theres really no place for your small screwdrivers" 😂😂

“I always have to carry my flashlight in my hand when I use the veto pack.” Found a spot for his flashlight in the veto pack. Lol

Tape maysure and MultOmeter

I watched this video to see how good the Milwaukee backpack is for my father he does hardwood flooring and he constantly mentioned that he needed a backpack for his tools he told me his favorite brand was Milwaukee and that he touches no other brand but Milwaukee as if it’s his wife lol but I purchased this bag for him because of this review seem to fit all his needs and wants he loves it and has no other tools in there but Milwaukee and because of this pandemic I went ahead and threw in 2 face mask for him one red and one grey he was like a child on Christmas except it was just an ordinary day just an appreciation gift for being the best father that he could possibly be.

1 thing I’ll mention about all of these bags is that are are all larger in person than they appear in the video(s). I personally have the Milwaukee job site bad which is the generation prior to the one shown in the video and it’s great. Stands up never falls and tons of room. I keep my drill inside seated on the floor along with bit cases. The drill sits there just as comfortably as it would in its own case. I do however feel Veto is the best you just have to pick the right trade. Veto is like Ford. You’ve gotta order what you want because the variations are too many to just pick one. They are true pros.

One small thing here, that is not the comparible klein, those are veto and milwaukees top models, the klein master backpack is the comparible one to those two, that's kleins mid range one Infact I think that one is low to mid range. The master backpack is an entirely different animal and it doesn't fall over

Thanks for taking the time to do such a thorough and cheerful overview/introduction to these bags.

This is how you do a tool bag review vs someone rambling about a bag load out. Very insightful

Those loops on the front of the Milwaukee bag are Molle webbing. It’s an attachment system that’s common on military gear.

Honestly, the tape measure has only been an issue for me personally with cheaper tape measures that have those exact little skinny cheap clips. If you put a nice quality tape measure like a Stanley or Milwaukee with a larger clip that fits a lot more snug on those clips, you wouldn't have to worry about that.

Im a plumber, been running a Klien backpack for years now. Just upgraded to a veto pro pack wheeler tech. The pocket panels can come out and be changed with different ones. This means you could keep one half completely open for bulk things and have the other half with tools. Could probably cut a pannel in half to have some tool storage on top but keep the bottom open. Its a heavy bag but wheeling it around like a luggage bag is very nice when your able to

Summer of 2019 I was working on a customer’s AC when the roofers dropped a 4” x 12” wooden beam. I managed to get out of the way in time but it fell off the roof right my on top of my Veto backpack. I had my 6” long 1/4” magnetic nut driver in one of the little side pockets on the outside of the bag. The nut driver was bent over at a 30* angle but not a single stitch even popped on the Veto, it shrugged off a several hundred pound wooden beam falling from a height of 10 feet with nothing but a few scuffs, and other than the nut driver the rest of my tools were completely undamaged. That made me a Veto fan boy for life, the Klein or Milwaukee never would have with stood that

Awesome review! No one has given such a thorough review on different bags and have actually worked out of them... And this is a 4 year old clip. Sold on the Milwaukee, especially for the price. Cheers!

Good video. I’m glad you went over the balance of the Milwaukee. I had the Klein and it was always falling over.

1:39 My taype major

Have the Milwaukee for awhile now and it's a great bag. Like you said, with plenty of room to spare. The front protects my sensitive test equipment. Definitely has better interior pockets than the others. Will keep mine for a long time. Thanks for the video. Nice job.

I would just get two separate tool bags ….one for HVAC, one for plumbing …you will have to double purchase some tools ,….but it’s worth it….because you can just “grab and go “ much more efficient in the long run . I use a veto pro btw….I also have a second tool bag for big tools , it’s a husky

Great review. You really go thru every aspect of each bag. Great job!

Honestly I like the Milwaukee I haven't bought one cuz the price I bought the Husky backpack for now what I need it for it works but I can't put everything I want in there well thank you for your video cheers with a beer

I've had this bag for a while now. It has changed my everyday work. It's incredible!!!

The 3 bags are great, everyone will have an opinion on each of them …. I work in the oil fields I see the 3 bags on this video at work every day and they are all good and strong for what they are used for..,

Great review, and I'm even more happy that I went with a ToughBuilt rucksack !

I have the milwaukee one and love it highly recommend it plenty of room

$300 bag .25 cent tape

He also forgot to show on the Veto Bag the straps so the outsides won't fall all the way they are in the upper pocket. You tucked it back in after you pulled out your gloves.

19:20 wrong that is for better support while carrying the bag on your back not what those hooks are there for the hooks are to stay secured while wearing it .

Nice job, Thanks ! I grew up using an all leather "pouch", I still love a fully exposed pouch, the new style nylon ones I've been getting from our local suppliers fall apart in short order, cheap. I'm looking at the smaller Veto's, but might just get a customized Nylon/Leather hybrid made by my local leather shop.... something to keep the nylon bag from blowing apart at the bottom where the screwdrivers & wrenches make contact.

Have the milwaukee back pac for 4 months now starting to fall apart . Plastic buckles have broke :wich is not included in the warranty zips are coming apart slights as front of the bag is heavy and cases it to sag

Great video. Which of the three bags are the lightest? I’m worried about the total weight and its effect on my body. Thanks

I agree 100% about tools encased inside. I work at apartment complexes and need to go in and out fast and put back in truck fast.

“I could fit my baby in there if I needed to.” I appreciated your review and then I was like wait, did he really say that…🤣❤️ Agreed from another comment, the small Klein backpack is not comparable to the other two being reviewed. My little Klein does fall over all the time🙄 but it was a gift from a journey when I was brand new so now I need to upgrade. Thank you for the awesome review, very thorough!

I went with the klein so I could have a smaller portable bag to haul my tools around while riding my motorcycle. Plus the colors match my Ridgid tools and my KTM motorcycle.

I like both your Veto and Milwaukee bag. And I recommend 1 EDC backpack with daily variable extra spare space plus task categorized tool backpacks, suit cases, boxes: 1.) Start your professional EDC with a light backpack/tool case plus a robust tool box (my 1st profession: Radio- & TV Service Technician 1980s), 2.) Switch to specialized EDC backpack, I use Laptop/Notebook business suite case (my 2nd profession: Computer Engineer & Software Developer fewer EDC tools) but still prefer EDC backpack (Laptop/Notebook pocket, few tools pouches, big main pocket) when in town walking/cycling or public transportation bus/tram/train, 3.) Resort your growing number of tools together into category-specific bags/cases/boxes (my hand tools categories: fine electronic DMM & solding, electrical & mechanical wood & metal work) which I put into 2 aluinium tool suit cases (tool/camera division) and steel tool box, 4.) Electrical tools come & stay in their original tool case - add tool specific extras (drill bits into the drill case, sandpaper into sanders tool case ...) so you just grab the drill case and miss nothing when drilling, 5.) Put further installation material into a big bag/box, which should be big enough to carry also needed tool cases to have both hands free to carry everything outside your backpack and shoulder bag.

Had the Klein bag.. it served its purpose for a few years..only has a 1yr warranty. Now have a Veto Pack Pro pack..quality is superb compared to Klein..Veto has a 5ry bag warranty..they will ship you a bag while yours is repaird or replaced. Have not had Milwaukee

I use the veto. And not a fan boy's club!! Is just they last longer and there new models a bit smaller but yet super capable to hold what you need..

I like the Ideal tool backpack. Perfect blend of tool bag and backpack.

Great honest job reviewing, thx

no compare ,go veto im loving all of my veto bags

Your comparing a $280 veto bag with a $90 klien bag? At least compare the veto with the $180 klien bag.

hey man thanks for your video 📹 it helped me understand the advantages and disadvantages of all 3 back packs 😀 with out having to buy them all. i only have the Milwaukee I use it as my installation bag 🎒 its awesome i was considering the veto but the ĺack of room for the drill kinda makes me change my mind.

Any man who loves tools has a wife yell at them. And it doesn’t even have to be their wife hahaha

I need a bag big enough to pack a grinder .1/2 inch impact.band saw .saw zall.and tape measure

My HVAC school had a Klein bag similar to that one and it would never stay standing unless you had most of the weight opposite of the straps. It almost always ended up being propped against something. It is definitely more of an electrician bag than HVAC

I was using Milwaukee for a year but gave up on it, it always falls to the front. Bought veto instead, much sturdier and balanced.

As a roofer it baffles me why it is so hard to find a suitable backpack. I'd like the outer strength and comfort of the Veto backpack but less compartments. I checked out a Veto backpack today and I couldn't even reach the bottom, too much clutter. All backpacks seem to cater to electricians.

I had the Klein backpack for my HVAC service bag, I keep little parts in the top zipper pouch and the zipper is broken after not even a year. Found the Milwaukee Ultimate Jobsite backpack on Home Depot for 43 percent off for $69.00 so it was an easy decision. The Klein got annoying always falling over. The Milwaukee seems to have a better base to it.

Those "Channellocks" you have with the Black and red handles? Which brand are they? They look very similar to the Knipex Cobra design but are clearly not Knipex? If you could let me know, that would be great. I love the Knipex pump style Cobra pliers with the push-button just hate Knipex prices. If I can find another brand that is EXACTLY like the Cobras, I am SOLD and THOSE look very similar? Thanks!

I have the Milwaukee bag. It's fantastic for me. I do have a smaller veto bag for smaller jobs, but the Milwaukee bag is perfect for my needs.

What’s a “ maltahmeder “?

Nothing better then the veto i luv my bag!!

huge thank you for sharing your experience

Many thanks for so thorough reviews!

I dont know how you can't fit your flash light, I have my full size milwaukee impact with a 9amp battery in the front and my milqaukee flash light same size as your Dewalt in the back portion of the backpack and no struggle closing the zipper and my bag is full loaded at 50lbs

What’s a multometer?

Bravo! Very detailed review & presentation!, In-depth etc....👍

I have a klein rn but I have a veto on order. Getting to be replacement time. Small note on the klein bag part. The screwdrivers are upside down. Do you do that on purpose or just always put them in that way?

Right on. Thank you

Volt-tom -eter?? Maysure?? Where you from bud??

I have a southwire backpack that's better than this Klein and at least equal to the other two bags. I think I paid $70 for it which was a very nice deal considering the quality.

Bro. Looks like you fit right in the bag. Those are some really clean tool bag and tools.

Multimeter* There is no O in that word.

Still look new to me

good for holding my tape maysure and multometer

You should have compared all of these to the “Velocity Pro Gear 5.00 back pack. It’s a fabulous piece of kit

Great video, also the Veto pack the inside pockets are velcroed inside they are removeable I don't think you mentioned that or might not know it, just another little feature. Will be purchasing a backpack soon, just doing my research your vid helped!! thank you!

"Playing tetris" Its called organization Thats the purpose of the pockets for the object to be placed back. Get a bucket if you want throw things around

I love this video. But I don't need my right angle drill in my bag ever. Not hating just saying. Thanks bro.

Hi I live in WV an I always wanted to do what you do can you help me get certified? Thank you

I had the other version of the klein bag. Also kept losing tape measures from that clip. Also didn't like how it folded in half, if I worked with other people and it was on the floor it would get kicked and my tools would spill everywhere

You mean multimeter? What’s a multomitor?

Throw a clip on the light and clip on when you’re standing up

Give me the Klein or Milwaukee all day. My experience with veto was horrendous and I will never spend another dime with them!!!

I loved that version of the klien bag. The newer version has a zipper inplace of the large pouch. It works but im not a fan of it.

Nice review. Im also a plumber.. but hell man why aren't you using a multitool for drywall!? So fast and easy.

Great video, thanks for the reviews

Where can buy this bag in Singapore?

What's the name of the tools in the minute 11:23???

I use the Milwaukee ultimate jobsite backpack had it for 2 years works perfectly for me I have tried DeWalt a off brand from Amazon and they stink

Very thorough! Love it!

Man I just need something to climb up access ladders but looks like they are too bulky to go trough the hatch

I literally bounce around with a mil-tec backpack what cost £30 and does everything I need

Very detailed video, thanks👍👍

Dang bro, how does everything on the outside pockets fall out while you’re climbing ladders? Unless you’re skipping every rung or doing some parkour, those tools should not fall out. I agree with the tape measure slot, never liked it. But great video though

That Milwaukee is a beast

Vito is the best no contest

Veto hands down ain’t even a chance not even a contest man. Cmon. Anybody who see this get a veto and you will be thanking me later

Its designed to Claimshell like that

Avoid having a bad tape measure and then you don’t have to worry about it falling off

Holdd up why does he put his screwdrivers upside down so you get stabbed reaching in the bag? lol

Do the veto have deep enought pockets for long klein screw driver ? Im not sure about the veto backpac pockets... i think the klein are more use full

Good video. Whats names is minute 11:11?

Plumber and hvac huh? Why do both?

What is Price only bag

How can u loose those tools from the sides when you climb straight up?

Everyone knows Klein bags suck very chintzy and that model always falls over only Klein bag that’s any good is there lineman canvas bag designed for lineman but then again veto is better but costs more you get what you pay for if ur cheap buy a husky bag and don’t complain about price got to pay to play

Imma buy your used veto in case you getting rid of it😁

Great review thanks bud

that not standing up right is the biggest problem with that klein