VEVOR 12KG Propane Smelting Furnace and Forge.

No video

VEVOR 12KG Propane Smelting Furnace and Forge.

Рет қаралды 11,093

Күн бұрын

This video I'm taking a first look and test of the Vevor 12KG melting furnace and forge Combo
Affiliate Links
amzn.to/40sAXrO (Amazon.ca)
amzn.to/43GN5YW (Amazon.com)
s.vevor.com/bf... (VEVOR.ca)
s.vevor.com/bf... (VEVOR.com)
s.vevor.com/bf... (VEVOR.uk)
You can help support this channel in many ways
My main online shop - www.redmapleforge.ca
Etsy Store - www.etsy.com/shop/RedMapleForge
buymeacoffee - www.buymeacoffee.com/kevinchainey

Пікірлер: 36

@lloydprunier4415 Жыл бұрын

Mine is to be delivered tomorrow and I am new to the game. Have done a lot of welding and metal work over the years and this should be great for me because I've been too lazy to build my own. Like the stainless steel shell and hope it will last longer than a carbon steel shell. Thanks for the setup video!

@KevinChainey Жыл бұрын

Good luck!

@Wachuko-1 Жыл бұрын

Oh man! Talk about not thinking before buying something! Kicking myself just about now! I recently bought the Vevor forge with two burner... son of a gun! I could have purchased this unit instead and have a furnace and a forge! Argghhhh!!! Anyway, great video!!

@color_my_life_fr 7 ай бұрын

For the air adjustment I am thinking of installing copper tabs, drilling the tabs and soldering a nut on them. Through the nut it will be possible to tighten a wing screw to lock the adjustment 😉

@nickjonas5329 6 ай бұрын

Great video, Thanks 👍

@Mister0J78 17 күн бұрын

Mate I wish I had seen this video before I got my 6kg unit as it is a single burner mine also did not come with refractory cement so I am now thinking I need to buy some and coat it

@RustyInventions-wz6ir 7 ай бұрын

Very nice furnace

@frankromero5581 Жыл бұрын

Ive seen the forged used without a lid .

@swdweeb Жыл бұрын

Smelting? So we're using it to extract metal from ore? Cool

@howardosborne8647 7 ай бұрын

This 'smelting' description is an error I see very often.

@NonchalantMusings Жыл бұрын

Nice review. I've been considering the Vevor 12kg but am 100% new to melting furnaces. What others would you recommend on a budget?

@KevinChainey Жыл бұрын

The vevor 12kg one is the only per made one I have used so I only have homemade ones to compare it with. Basically any of the $400 or less ones will be basically the same. I went with the vevor 12kg one because it can double as a forge. If you don't care to forge and you are not casting big items I would recommend a 6kg to start off with.

@yahshuasaves7478 11 ай бұрын

Hello Kevin, nice video! Is there anything there with your connections to have air fliw?

@KevinChainey 11 ай бұрын

Just cut out holes in the burner near the gas intake to suck air in.

@northernsilverstacker1641 Жыл бұрын

Do have to have both valves or can you just have one open(Have the bottom one open and the top one closed)?

@KevinChainey Жыл бұрын

There is a valve on each burner so you can run it with just one burner. I found it really hard to light with just the top burner, due to the lack of a choke to control the air. Once hot it runs on one burner no problem.

@Airon79 9 ай бұрын

Sideways with the lid on it's pretty much like a glory hole , like for glass-blowing .

@howardosborne8647 7 ай бұрын

I was going to say very much the same. I worked in a glass blowing factory for several years.

@Airon79 7 ай бұрын

Awesome @howardosborne8647 !

@Airon79 7 ай бұрын

@howardosborne8647 I have a book on glassblowing from 1974 , I've had it for 30+ years but never taken the steps to blow glass . The next City over from me , Pensacola , has a glassblowing club and I believe they are the ones who made the glass pelican figures that downtown Pensacola has displayed on its sidewalks .

@kevinthompson9118 Жыл бұрын

How much water did you add?

@KevinChainey Жыл бұрын

not sure on exact amount but I added a little at a time until the thickness of a milkshake.

@Freeman-Dl70 Жыл бұрын

I've seen where you need a piece of cardboard under the crucible, just to reduce the chances of the crucible sticking to the fire brick.

@KevinChainey Жыл бұрын

Never heard that before but I can see how it will help. Thanks for the tip

@johndurrett3573 11 ай бұрын

Havent seen any videos yet about crucibles sticking to fire brick. cardboard would catch fire from the heat of the crucible so I dont see that as a viable option

@roguepowersports3576 10 ай бұрын

@johndurrett3573 yes the cardboard burns away. It's the ash from the cardboard that acts as buffer between the crucible and fire brick to prevent them from sticking to each other which can happen.

@howardosborne8647 7 ай бұрын

@@johndurrett3573the cardboard burns and turns into a thin carbon layer under the crucible. That is how it prevents the crucible fusing to the brick.

@howardosborne8647 7 ай бұрын

@@roguepowersports3576Exactly how it works to prevent sticking of the crucible

@B2bH2o Жыл бұрын

Can this thing melt iron?

@KevinChainey Жыл бұрын

Funny you asked. That was my video I uploaded today kzfaq.info/get/bejne/rrmprMR7nJiYeWg.html

@jmendez8112 Жыл бұрын

What's the maximum temperature that the dual burner reach? Can it melt steel

@KevinChainey Жыл бұрын

I personally have not tried melting steel with it yet. Vevor claims it can reach up to 2700F which is the mid point of melting carbon steel (depending on the alloy). I will be trying to melt steel in the future with it, to see if it can.

@jmendez8112 Жыл бұрын

@@KevinChainey thanks. Looking forward to your future video! 🔥

@howardosborne8647 7 ай бұрын

@@KevinChaineySteel melting in that type of crucible is not really a safe idea. The melting point of steel is way above the safe working temp range for a clay/graphite crucible.