Order here: s.Vevor.com/bfQqE0 Use code ‘SAVEMORE5’ If you know you’re going to have a lot of low spots in metal to pull, on multiple cars, this tool will definitely benefit you
Пікірлер: 80
@OldBondoBilly10 ай бұрын
GD90E Dent Puller s.vevor.com/bfQqE0 Use code ‘SAVEMORE5’
@boblow218610 ай бұрын
That looks like a great tool. Pro tip for anyone interested. On light panel not fixed to the car. Clamp something heavy on it the panel just a pile of clamps or bit of heavy metal. I have a large pry spoon that I clamp on. This helps stop the panels jumping and you need less of a pull on the hammer. Hope this helps someone. Great work Billy. And very nice machine thanks for showing us. Bob.
@danw108910 ай бұрын
I think the pointed end of the ground will weld itself to the panel and you back the brass nut down to the panel to keep it from falling off . When your done loosen the nut and wiggle the ground off
@edsmachine9310 ай бұрын
That's a pretty neat machine Billy. Thanks for sharing. 👍
@godshaw18710 ай бұрын
I’ve been looking at this dent puller for some time now…I definitely need it.
@SearchingForPurpose9 ай бұрын
I am definitely gonna have to get one of these, looks so much better than a traditional dent puller
@urbanadv520810 ай бұрын
So far so good, thanks for the demo
@thisisyourcaptainspeaking225910 ай бұрын
Thanks Billy, the GD90E looks like it's quite capable and well made. Me wants this device.
@Sherlock06710 ай бұрын
Cool machine Billy! Never knew there was such a thing! Impressive!👍
@MidnightOilsRestoration2 ай бұрын
I can see that would be a lot better than my stinger stud gun. Many years ago a friend who also did bodywork had a machine that was similar to this. It was a black box that sat upright with rollers on the back so that you could easy roll it to your work spot. It had a long pointed lead with a trigger for one hand, and that lead slipped through a forked pulling lever to put against the car and pull with the other hand. He payed a fortune for it but it was really nice, this reminds me of it but much more affordable!
@VinoRatRodbuilds10 ай бұрын
That's a keeper Fur sure.
@fuffoon9 ай бұрын
So that's the new tool. Very nice. It looks faster than the porcupine style puller.
@OldBondoBilly9 ай бұрын
It sure is!😉😉
@spineguy155310 ай бұрын
Pretty smooth!
@pontiaccrest10 ай бұрын
Amazing machine and shop class🎙️🕺🏻💪🏻
@immanutt444210 ай бұрын
So is the New VEVOR Stud Welder/Dent Puller your new ... like thingy ?
@Arc-popz10 ай бұрын
Pretty sweet! Had thought about buying a vevor ac/dc mig that would do aluminum. Ended up buying a hitbox 200 tig with pulse
@OldBondoBilly10 ай бұрын
YesWelder sent me their flagship pulse tig. It’ll be fun to learn how to use it😉😉
@Arc-popz10 ай бұрын
@@OldBondoBilly buy argon bottle cuz mix co2 will make u a q-tip 👑
@MrSprintcat10 ай бұрын
You could use that suction cup for your like thingy😂😂. Thank you for the video Billy
@dumblegorethefirst316010 ай бұрын
Billy needs protection with all of us touching his like thingy on a daily basis 😂
@MrSprintcat10 ай бұрын
@@dumblegorethefirst3160 😅🤣
@anthonynapier466810 ай бұрын
Nice little machine 👍 👍
@dcf47610 ай бұрын
A tip for you Bondo, sometimes if you pull it too high and make a nipple on the metal, just put the tip back on that spot and tap the trigger, it'll heat that nipple back in nicely, takes a few practice goes but can make it easier than tapping a high spot back down and sometimes causing the 'oil can' effect👍
@OldBondoBilly10 ай бұрын
👍👍
@davidhouser5867 ай бұрын
That’s cool wouldn’t mind having one myself. 👍
@OldBondoBilly7 ай бұрын
My live stream 8 PM CST Saturday Will have a contest giving you the opportunity to possibly own one
@PhillipHall0110 ай бұрын
Billy I built one a couple years ago. I don't know if the G90 was even out on the market then? The price on this unit is right! Good value. Good video.. Phillip Hall
@OldBondoBilly10 ай бұрын
Hey Phillip. Did you give me the link to that guy building one from microwaves?
@PhillipHall0110 ай бұрын
@@OldBondoBilly I did his youtube channel is Fix 206. He also built his own frame pulling machine and showed how he did it step by step all the way down to the measurements. He is a very resourceful fellow that is like you, always willing to help and answer questions. Let me add Billy as far as the dent puller. (or spotter as he calls it) If I had it to do over again I would simply buy the G-90 because I had to gather the components necessary to put one together, including the accessory pull tools, ground cable, positive cable, housing etc . I really think it would be cheaper (if we include our time) to simply buy the G-90, and I have no dog in the G-90 hunt. Phillip Hall
@PhillipHall0110 ай бұрын
Adding: Fix 206 has two videos on this, one is an updated version, here is the original simple method. kzfaq.info/get/bejne/hp-hlpOjvs3bYmw.html Phillip Hall
@vidulanti1979 ай бұрын
Hi Billy Can you test spot welding with the vevor and fo a video. Thanks Terry
@OldBondoBilly9 ай бұрын
I did
@tonyypaints936710 ай бұрын
I got this machine on my Amazon list! Vevor seems to be a decent brand! I don't need EVERYTHING snap OFF!! Billy 4 prez
@vrg6910 ай бұрын
That's cool as hell
@user-sl9ss1pn9n3 ай бұрын
I need one of those
@cryptidsNstuff10 ай бұрын
Do they have the prybar like the maxi by dentfix? That would make it way faster and more accuracy. It just takes a bit to get used to it.
@OldBondoBilly9 ай бұрын
That DC welding is a lot stouter than AC welding. I think the prybar would pull it off too easy.
@cryptidsNstuff9 ай бұрын
@@OldBondoBilly ahhhhh, that explains why I've not seen the lever like maxi station.
@jasonwilson920710 ай бұрын
that stud welder will get dusty now lol i never use mine anymore
@immanutt444210 ай бұрын
here in Appalachia we call that slide hammer a ... knocker
@OldBondoBilly10 ай бұрын
That’s the trade name of the Morgan 12 pound slide hammer😉😉
@immanutt444210 ай бұрын
Oh Billy ... you're such a Stud ... Puller ...
@russellrice85089 ай бұрын
Love your , Videos, Ben there and done it 😢
@rj68128 ай бұрын
Just wondering, since the fender is already off the vehicle, why are you not using a hammer and dolly to straighten it when you have access to the back of it?
@OldBondoBilly8 ай бұрын
Because I’m not stupid
@davidhouser5867 ай бұрын
Dolly and hammer will finish the over pull better
@DR-xt9ux6 ай бұрын
@@OldBondoBilly 5:30 stupid is what stupid done do did
@CarsNfish4 ай бұрын
yupp would be alot faster but hey for the sake of the video its showing how to use the product not how to do body work
@OldBondoBilly4 ай бұрын
@CarsNfish Another expert presuming to surpass my 5 decades of dent fixin’. The reason I replied to the first hammer & dolly dummy that I was using the dent puller “because I’m not stupid” was because there’s 4 inches of inner bracing right behind where I’m pulling. You kids pipe down and let yer daddy take care of business 🤣🤣🤣🤣🤣
@Mr.Avuncular10 ай бұрын
Curious to see how they hold up over time...lots of ways to get the job done!
@OldBondoBilly10 ай бұрын
It appears to be well-made😊
@Mr.Avuncular10 ай бұрын
@@OldBondoBilly time will tell ....I hope it does!
@PhillipHall0110 ай бұрын
@@Mr.Avuncular I've heard nothing but good things about these units... I built my own before I knew these were available. I did see the snap-on unit but it was over a thousand dollars. I used 3 microwave transformers among other things when I made mine.. Phillip Hall
@Mr.Avuncular10 ай бұрын
@@PhillipHall01 I've used a few different ones and each has it's advantages. It appears they've put some thought into the build
@PhillipHall0110 ай бұрын
@@Mr.Avuncular Maybe it will hold up for Billy. I hope it does too!
@eddiebarrera-ws8vu10 ай бұрын
Mine is defective doesn't really work with that slide hammer attachment it doesn't even stick even at high,but maybe I'm using to long and to thin of an extension cord.
@OldBondoBilly10 ай бұрын
A solid ground is an absolute necessity also. I’ll move my fenders closer to the outlet and plug it in without the cord and see if that makes much difference.😉😉
@dcf47610 ай бұрын
Also the metal being worked on needs to be near spotless and raw, a lot of later panels have a very thing galvanised coating on them and it renders those dent puller useless, once you clean off that gal, the puller can be a bugger to get back off sometimes 🙂👍
@PhillipHall0110 ай бұрын
@@dcf476 Just give it a good twist back and forth, it will come off pretty easy that way. Phillip Hall
@DonaldGMyers10 ай бұрын
I have this exact same unit and have found it works great on thin (newer) metal but not so much on thicker (68 mustang) fenders
@PhillipHall0110 ай бұрын
@@DonaldGMyers I'm not trying to overly reply, but I can see that. For older thicker metal, the old school tried and tested stud gun might be the best option of the two? Phillip Hall