VEX Robotics Pick and Drop Ball Machine from Hexbug

Рет қаралды 69,784

Күн бұрын

For full review and shopping info►ttpm.com/p/15675/hexbug/vex-ro...
STEM construction toy. Vex Robotics Pick & Drop Ball Machine comes with more than 400 pieces for building a machine that picks up eight balls, one at a time, and lifts them up to drop them on a track.
Product Info:
The Vex Robotics Pick & Drop Ball Machine comes with 400 pieces for building a machine that picks up balls and drops them on a track.
✮SEE MORE TOYS✮
MICKEY MOUSE CLUBHOUSE GEAR 'N GO CHAINSAW:
ttpm.com/p/15125/just-play/mic...
CRAYOLA CRAYON CARVERa
ttpm.com/p/15964/crayola/crayo...
MY LITTLE PONY RARITY BOOKTIQUE
ttpm.com/p/15191/hasbro/my-lit...
✮FOLLOW US✮
Facebook: / ttpmofficial
Twitter: / ttpm
Instagram: / ttpmofficial
Pinterest: / ttpmofficial
✮SUBSCRIBE✮
/ ttpm

Пікірлер: 33

@NamNgo-nr7bz 3 жыл бұрын

You ran into the same issue I ran into. The 3rd prong on the right doesn't go far enough down to pick up the ball. It needs a 1/16 of an inch in downward travel. Were you able to figure how to achieve this? I'm wondering if I should use a washer to raise the platform slightly.

@ostrichtheostrich2231 7 жыл бұрын

I didn't know that lots of people had this problem! :)

@ostrichtheostrich2231 7 жыл бұрын

Same

@Trainzer_ 5 жыл бұрын

I hope you guys know that there is thin sheet of plastic that is on the clear plastic that looks better when removed.

@emilyriggle969 6 жыл бұрын

Mine works but is not the best. You can fix the arm not picking up the ball by moving the rubber band down the arm. It was still fun to build

@NamNgo-nr7bz 3 жыл бұрын

I tried that, still the arm to the far right within the video isn't picking up the ball. the platform needs 1/16 of an inch raise.

@reese6716 7 жыл бұрын

im 10band i got it yesterday andbit is cool but im not done its pretty hard

@_itsisaac8602 8 жыл бұрын

mine dousnt even work😡!!

@BrickThunder 4 жыл бұрын

Probably because you built it wrong, mine works perfectly

@joeypetrasun3747 8 жыл бұрын

cool

@zackloyd7170 7 жыл бұрын

can you tell me if the ray gun shots the balls

@ionedge5703 7 жыл бұрын

nope, just a static model, if you want something that shoots balls get the snap shot.

@zackloyd7170 7 жыл бұрын

cool thanks

@dannybrysonjr7241 6 жыл бұрын

Just move the rubber band down a little then it should work

@igballboingis4708 6 жыл бұрын

Did anyone else’s get stuck on the plastic rail on the top

@tjprptchable 5 жыл бұрын

Yes but I found the solution if you have another ball machine

@tjprptchable 5 жыл бұрын

Mine didn't repeat as if the ramp was not tipped but what I did was let the balls go on to the other ramp that would make the balls fall to the ground but I had another ball Machine so the balls would fall into it so then it was two ball machines combined

@arismo2214 7 жыл бұрын

Mine doesn't work!

@ionedge5703 7 жыл бұрын

FIX IT!!!

@sp4rekh 7 жыл бұрын

+Ion Edge lol

@peterhall4086 6 жыл бұрын

You need to follow the instructions, and do it pretty much to the letter.

@ionedge5703 7 жыл бұрын

XD you're "Professional Builder" screwed it up pretty badly, notice how the first one does not pick up the balls :/

@ionedge5703 7 жыл бұрын

Sorry, didnt finish the entire video, but I managed to fix mine pretty easily.

@NamNgo-nr7bz 3 жыл бұрын

@@ionedge5703 How were you able to fix it? I tried moving the rubber band up and down. I'm thinking of adding washers to the bottom to raise the platform slightly.