No video
VF750C Honda Magna regulator/rectifier check and replacement. Also continuity check of stator.
Рет қаралды 27,965
6 жыл бұрынAn information video for the troubleshooting and repair of the battery and charging system of the 3rd generation vf750c magna. Particularly the regulator/rectifier. Be sure to download the manual and check the particulars for your make and model of motorcycle, specs and procedures will vary from manufacturers. I hope that this can help on your motorcycle repair. Cheers.
@barmaley1982 22 күн бұрын
Thanks, I am smelling rotten eggs from under my seat right now. This is helpful.
@branhub 10 ай бұрын
98' Magna and you confirmed my research. Thanks for the video man.
@francisbaker8590 4 жыл бұрын
Thank you for this video. I have an '88 magna and just got that rotten egg smell.
@ogonzilla 5 жыл бұрын
very helpful thanks!!
@user-ur8tx8vs2z Ай бұрын
Thanks!!!!
@MannyMarvelous 5 жыл бұрын
that's a clean magna!!
@weddo3 2 жыл бұрын
I really wish you had a video of the removal and replacement of the stator. I need to change mine but dont want to wing it on the parts to remove in order to replace it
@darinparest 2 жыл бұрын
Sorry brother..I don't have the bike anymore. Look for a manual it'll give you a step by step solution. Good luck.
@khada3308 2 жыл бұрын
Hey buddy got me a 99 vf750cx magna lost the keys and trying to get the ignition out to check for a key code, and having a h3ll of a time getting it off, any tips? Trying not to buy a new one for 150 when all i did was lose they keys. Hmu buddy ty
@weddo3 2 жыл бұрын
you say to download the manual but where do I find that? I have a 96 Magna vf750
@aubryjackson9210 5 ай бұрын
The whole thing is free on google
@martyflint3849 3 жыл бұрын
Mine went to 19.5 v dc
@theapachepatriot6900 2 жыл бұрын
Same here
@modesttea7133 2 жыл бұрын
I got a 95 and I just put a new stator, voltage regulator, and battery in and it won’t charge
@darinparest 2 жыл бұрын
You might have an in depth electrical problem that a Honda tech might have to check. I wouldn't dive too deep into it myself. Hope you get it going.
@darinparest 2 жыл бұрын
Check all fuses and grounds also.
@MrYukon04 4 жыл бұрын
How did you get it out
@darinparest 4 жыл бұрын
Take your time it's very difficult. After loosening it with an open end wrench I used my fingers and a magnet. You'll have to be an acrobat.
@MrYukon04 4 жыл бұрын
@@darinparest that was rusted so had to pull the whole damn box out. But I got the old one cut off and putting the new one on right now lol
@cynthiareadinger7281 4 жыл бұрын
This is my question, having a hell of a time trying to remove it!! Hoping putting it back in won't be worse!!!
@darinparest 4 жыл бұрын
@@cynthiareadinger7281 you might have to turn the nut 1/4 turn at a time. Also, use an extendable magnet to make things a little easier. Hope this helps.
The GorillaBiker
Рет қаралды 81 М.