alter..

@@jokerthemisguidedmoralcomp2063 jup 😎👍

Well this was a while ago... but as i remember: - SHS/J-Tac Speedpiston 14 Teeth, hardened steel, nylonfiber - Aimtop HopUp-Bucking, green - SpecnaArms 14:1 gears (with ball bearing) - GATE ASTER with ASTER QUANTUM Speedtrigger - Tornado hightorque motor (most others will also work, just good neodym magnets and hightorque is the key.. SHS and some others are a good choice) --------------- Parts not changed because its not needed or not worth the effect: - Nozzle (exchange it for a very very small FPS-increase), Cylinder, Cylinderhead, HopUp-Unit (pay 70+$ for a MAXX if you want to not lose like 4 BB´s while reloading..), Pistonhead (if it seals, it seals) Note down: To not break the gearbox with a spring stronger then 120, inform yourself about something called "radiusing" kzfaq.info/get/bejne/otGlpLCVsLiYlqM.html you are welcome

Well this was a while ago... but as i remember: - SHS/J-Tac Speedpiston 14 Teeth, hardened steel, nylonfiber - Aimtop HopUp-Bucking, green - SpecnaArms 14:1 gears (with ball bearing) - GATE ASTER with ASTER QUANTUM Speedtrigger - Tornado hightorque motor (most others will also work, just good neodym magnets and hightorque is the key.. SHS and some others are a good choice) --------------- Parts not changed because its not needed or not worth the effect: - Nozzle (exchange it for a very very small FPS-increase), Cylinder, Cylinderhead, HopUp-Unit (pay 70+$ for a MAXX if you want to not lose like 4 BB´s while reloading..), Pistonhead (if it seals, it seals) Note down: To not break the gearbox with a spring stronger then 120, inform yourself about something called "radiusing" kzfaq.info/get/bejne/otGlpLCVsLiYlqM.html you are welcome

First at all you may adjust the motor-screw on the pistolgrip - and get a propper battery like 11,1V Lipo. next steps would include to open ist and install other gears, an ETU and stuff..

actually its the smallest fucking thing you may find out there.. mine has no marking on it, so iam not really sure, but i gues its 0,5mm

Same couldn't get mine out, and now its probably pretty f'ed. I used a 0.9mm and that seemed to do the trick for abound 3 turns. then it started skipping..

so my friend which composed this did a very good job in selling his work? no i dont think so..

well i gues its just... uuuhm.. tight.. use force..

Moin, ich glaube M2 und dafür nimmt man einen kleinen sechskant..

Hello, the stock is fixed with a small grubscrew on the upperside of the reciever.. also you have to remove the gearbox to get it out

@@jokerthemisguidedmoralcomp2063 I just want to remove the stock and not the buffer tube, so I still need to remove the gearbox?

Moin, habe ich tatsächlich letztens auch schon recherchiert und der Markt schient ähm.. gibbet nicht einzeln. Ich denke ich suche mir die tage einen begabten menschen der in der Lage ist das 3-D zu drucken.. allerdings muss ich dafür erstmal wieder so ein Teil in die Finger bekommen.

Hello, this 416 takes the usual hop units which are tm-compatible. Like MAXX, G&G, Gate, Retroarms, etc. but the stock one is quite good. i recomment you just to upgrade the bucking

@@jokerthemisguidedmoralcomp2063 thanks for the value information, i will follow your recommendation.

@@Systema_AC you are welcome

You really want me to do something like this full story? okaaaay i will do soon.. but i gues its gonna be a bit boring..

@@jokerthemisguidedmoralcomp2063 Bah ! in fact if you could just make one on the "butt tube" how to easily remove the spring without having to dismantle it and not in time lapse of course ... that would be cool!

@@Djipset_washington ouch - this is a hard one, if i get the next 416 ill try

i got you bro... kzfaq.info/get/bejne/nteEksaevJPMqWQ.html the video will soon be availibe.

Hello, Stock: you need to get it to the longest possible position, then you need to get the button you pres to move the stock to go an extra mile - like grab it and get it up a little more then it would go with simple pushing... stocktube: you need to remove the stock, remove the upper reciever, get out the little screw from the upper side of the lower reciever, GET OUT THE ENTIRE GEARBOX and then you may unscrew the stocktube like a real one by just turn it a few times. hope that helps

@@jokerthemisguidedmoralcomp2063 thank you so much I was trying to figure it out for so long

@@teezzyyy3796 you are very welcome

@@teezzyyy3796 you are very welcome

J-Tac/SHS Piston with full steel rack, SpecnaArms 14:1 Ball bearing gears, Aimtop 60° HopUp-Rubber, Gate Quantum Trigger, Gate Aster, Tornado Hightorque motor (Longtype)

wanted to see every movement? wasnt the point here.. sorry

well.. i feel you bro. but did you ever tryed SRC mp5?