VFR 1200 Oil change in the final drive. SERVICE MANUAL

Рет қаралды 20,687

3 жыл бұрын

VFR 1200 F (2012) - SERVICE MANUAL
Oil change in the final drive.
My tip: After first ride after oil changing, remember to equalize the pressure in the final shaft.
Wymiana oleju w wale kardana.
Moja wskazówka: Po pierwszej przejażdżce od wymiany oleju, pamiętaj o wyrównaniu ciśnienia w wale końcowym.

Пікірлер: 29

@mattbaran5413 2 жыл бұрын

12 Nm for drain bolt, 8 Nm for refill bolt - correct torque values. Refill bolt is made from plastic and can be easily snapped off if over torqued. Bike should be on side stand not centre stand when final drive is filled up with new oil. Oil quantity varies between 200 - 210 ml.

@gilomoto5148 3 ай бұрын

Yep side stand when filling and checking level. 👍🏻

@TheShotokan6 2 жыл бұрын

Just bought a VFR 1200 and your video was very helpful. It only has 4300 miles but I don't think the final drive oil had ever been changed. For those of you who don't know, the bike feels MUCH smoother after the final drive oil change. BIG difference!

@Madras1976 3 жыл бұрын

Według instrukcji zalewanie oleju do przelania się powinno się robić na nóżce bocznej nie centralnej , więc wlewasz więcej oleju niż zalecane .

@Rafa-ff1ky 3 жыл бұрын

masz rację. poprawię film

@darekwilinski7947 3 жыл бұрын

Bardzo dobra robota wszystko Szybko sprawnie i na temat...👍

@RoadrunnerRoad 2 жыл бұрын

As a novice, thank you and some god comments

@Grahamvfr 3 жыл бұрын

Good video thanks. Handbook dosnt mention putting back on mainstand to refill. Does the actual service manual say that. Flicked through a pdf online manual couldn't find details.

@gilomoto5148 3 жыл бұрын

Put the bike on side stand to get the correct level when u refill oil 👍🏻

@Grahamvfr 3 жыл бұрын

@@gilomoto5148 thank you, I did decide to do it that way in the end.

@gilomoto5148 3 жыл бұрын

I was a bit late to the party 😂✊🏻

@GG-xt1hh 2 жыл бұрын

@Rafał Będziesz robił filmik z wymiany/czyszczenia filtra ?

@Marci1N 3 жыл бұрын

Warto by w opisie filmu dodać momenty dokręcania obu korków

@hcomune 2 жыл бұрын

Does anybody know the difference between the Motul SAE80W90 GEARBOX and HD? Rafal is using the HD for his oil change but I'm curious to know if the GEARBOX would be better or not (well, at least it is more expensive)! Thanks!

@joaquinrojasazanon2407 10 ай бұрын

Algún video donde se pueda ver el desmontaje completo del cardan, para poder engrasarlo? Muchas gracias

@GG-xt1hh 2 жыл бұрын

@Rafał da rade równie prosto wymienić płyn hamulcowy ?

@joaquinrojasazanon2407 10 ай бұрын

Algún video donde se pueda ver como se desmonta el cardan completo para poder engrasarlo? Muchas gracias

@hcomune 3 жыл бұрын

Hi Rafal, I have a VFR in Brazil and will soon do the final shaft oil change. Do you have to warm the oil before the change? Maybe a quick ride with the bike to warm up the oil?

@Rafa-ff1ky 3 жыл бұрын

Hi! yes, after the quick ride (to warm up the oil) I slightly unscrew the cap (final gear case hole) and equalize the pressure in the final shaft. Please remember to tilt the bike before, otherwise the oil will run out.

@hcomune 3 жыл бұрын

@@Rafa-ff1ky thanks you!

@hcomune 3 жыл бұрын

@@sonics747 thanks for the tips Sonics747!

@kereck100 2 жыл бұрын

Olá Henrique. Td bem? Tb possuo uma VFR1200f. A minha é 2011. Você tem algum fórum de discussão ou algum grupo onde compartilha as experiências com a VFR?

@oregonistoowet 2 жыл бұрын

This should be a video on how NOT to do this procedure. You overfilled the oil. The fact that oil spilled out the fill area is proof that someone overfilled it on the change BEFORE this one also.