Victron Electrical Upgrade - Project Brupeg Ep.363

Рет қаралды 27,134

10 күн бұрын

Please consider supporting the project each week with a few dollars / brupeg
Getting closer to Brupeg starting up on our new electrical system. With one week until Damon arrives, we are finishing all the prep so he can get straight into the wiring.
We need to get our aluminium battery box completed and bolted down, the batteries need to be fitted to the box, we need to install the fuses, switches and Victron components that connects it all together and the new controls on our alternator to charge the massive 30kwh lithium bank Brupeg now has.
Thank you everyone for all your support, thank you for making this possible!
Jess, Dame & Baby Cat
Brupeg's wishlist www.amazon.com/hz/wishlist/ls...
BougeRV solar For US: bit.ly/3Sx5IeK
BRUPEG22 for 22%off on all 200W BougeRV YUMA CIGS solar panels
BRUPEG18 for 18%off on all 100W BougeRV YUMA CIGS solar panels
#cigssolarpanels #buogervyuma #bougerv #flexiblesolar
The Unimig Welder we use unimig.com.au/product/razor-m...
The Unimig Plasma we use unimig.com.au/product/razor-c...
A playlist of our music • Project Brupeg Expedit...
Donate to Project Brupeg Research Fuel Fund www.PayPal.me/Brupeg
T-shirts, Coffee Mugs, Hoodies, stickers etc project-brupeg.creator-spring...
Facebook / projectbrupeg
Instagram brupeg_expeditions
Thanks for watching and for your support!

Пікірлер: 105

@JayCee-yy6oc 8 күн бұрын

So pleased I could help solve a problem and it passes muster with Dame, Cheers from the Pine Tree State!

@chrisevans8455 8 күн бұрын

Very exciting. Please extend to Duncan our very best wishes for a quick and complete recovery. He is one of the standout Brupeg crew. We look forward to having him back on board.

@zachpulsifer8446 8 күн бұрын

Did NOT expect a shout out for the Pine Tree State!! Fellow Mainer here, wicked cool gift Joel! Hope Brupeg can make it to the Gulf of Maine someday! Cheers!

@cybertuffguy71 8 күн бұрын

Mainer here as well but live in the FL now lol

@Planardistortion 7 күн бұрын

Mainer here as well, caught me off guard when I heard pine tree state!

@dominicbrant1968 8 күн бұрын

Take care Professor! We miss you.

@TD_YT066 8 күн бұрын

Hope you put something between the cross support bar and those battery terminals. In heavy seas, if the lower battery were to bounce and touch or the top battery from impact to a wave, bent that bar down, the terminal could spot weld to the bar and almost certainly cause a fire if there is not an internal fuse inside the battery. I'd have moved the bars so there is no chance of the terminal touching it.

@dominicbrant1968 8 күн бұрын

I did wonder about that, let's see what they've planned.

@TD_YT066 8 күн бұрын

@@dominicbrant1968 Heh, cliffhanger for next week ? :)

@kenrolt8072 8 күн бұрын

aluminum cover to replace the acrylic would buy time if you had a fire inside the box. Add a warning sensor + alarm for this purpose.

@dominicbrant1968 8 күн бұрын

@@TD_YT066 I'm guessing some kind of funky insulated terminal cover. I have a boat no bigger than a dingy and have fancy rubber covers on my terminals -ooh, err... :)

@TravelsOfBillandLaura 8 күн бұрын

Love the channel! As a live-aboard sailor, I can say that much of the work you are doing now is spot-on. For example, we have the same Balmar regulator and it has been running error-free for 13 years. It's like programming a 1960s computer but it works! Thanks for sharing your journey.

@Pinworthy 8 күн бұрын

The rocking of your ship will cause the batteries to move in that box and they will end up rubbing against the threaded rods. That will cut into the battery's plastic cases which could cause a short circuit that would lead to problems. Better to fix it now than later... But what do I know? I'm on the other side of the world... Good Luck and best wishes, Pinworthy

@kenrolt8072 8 күн бұрын

. . . . and with enough movement the positive and negative terminals on each battery could contact the aluminum cross beams . . . . Add electrical insulator tape wrap just in case

@thatdave86 8 күн бұрын

They could add stainless ratchet straps to hold down the batteries,they are used in Ski Racing boats and even offshore racing boats,holding down the battery or batteries.

@davidlecottage 8 күн бұрын

Whilst the lithium batteries do not vent any gases, they can go into thermal runaway which can be caused by charger overheating or internal construction failure. In either case the gases are very toxic and at high pressure and very hot (1400 deg C). Please check that the aluminium case and nylon connectors will provide sufficient protection - the box will probably need thermal insulation. General air ventilation will be required as they can get hot when charging.

@finnna8352 8 күн бұрын

Two things, those battery posts are awful close to those cross members in the box. It looks like wiring to those back terminals is not going to be easy.

@mungbean84 8 күн бұрын

That seems like one thing, but I completely second this. Even doing the hold downs is gonna be a proper pain in the proverbial...

@slashnburndotcodotuk 8 күн бұрын

That gear keeper is a much better solution to the bungee cord I suggested...

@jerrydutra3225 8 күн бұрын

Greetings from Sanford Maine 🎉 Happy Sunday Brupeg crew and fellow Mainers! Woohoo! 👍👍😁

@mickralph4623 8 күн бұрын

Best wishes Duncan!

@kaydog2008 8 күн бұрын

Happy to see Jesse is doing much better she’s such a troope and working her a$$ off.👉👉A slide in acrylic panel with seals and handle from the top into a tightning stainless angle rail clamps to seal with wing nuts to push the glass against the seal would have done a perfect job as well. Plus it makes for easy access with NO tools needed.

@dominicbrant1968 8 күн бұрын

It's so nice to see you putting new stuff! Exciting times..

@stuartburke5371 8 күн бұрын

How are you going to tighten those rear battery terminals, once the battery cables are in place. We build the box where you load the batteries in from the top.

@gillyb333 7 күн бұрын

❤ great job Damian, looking good Jess❤

@svfirefly2702 3 күн бұрын

17:11 can confirm that going significantly bigger (600’) doesn’t erradicate the awkward spaces, it just multiplies them and forms them around bigger gear!

@miningwayne935 8 күн бұрын

Good luck accessing those rear battery terminals! And your hold down clamps.

@purplebooger6410 8 күн бұрын

I do a very similar copper bar connection on very large car stereo equipment all the, for mine I flatten copper pipe to get the copper buzz bar and when everything is assembled and working I rattle can clear coat all of the copper and connections to prevent corrosion. It lasts for years with regular maintenance without any corrosion problems outdoors in an engine bay and never produces heat with 250amps and more at 16 volts. Good long term solution! Also I vote yes for a bigger Brupeg in the future!!!???

@stco2426 8 күн бұрын

Fab. Great to see the continued and continual progress. You're working hard and it's great to see. Really keen to see the batteries wqired up.

@MsJon52 8 күн бұрын

good vid, its great to see your progress, on the subject of pants I highly recommend dancing pants, of the correct size of coarse, the reason being they are great for ballroom and ballroom dancing, lol

@Pinworthy 8 күн бұрын

You should use some PEX pipe to cover the threaded rods in your battery box.

@Cameron-ur2tk 6 күн бұрын

you should use a thin piece of plastic above the the battery terminals incase a battery comes loose or just wiring it up. I imagine it would be square and span the entire aluminum shelf held in place by a couple rivets and some adhesive. . Having those posts accidentally touching the aluminum above would be quite the arc.

@kiwi_welltraveled4375 8 күн бұрын

Crikey........ The privilege is ours, to see such an amazing project come to life! As always Massive Respect Leave, Same or Better, Everything Be Kind ☮️🙋🏻‍♂️

@EleanorPeterson 8 күн бұрын

16:58 - "Vetoed!" You tell 'im, Jess. 😁

@jaymarlin3565 8 күн бұрын

You two have such interesting friends. AWESOME..!

@AM-ni3sz 8 күн бұрын

Very nice 😊

@user-wh6ff3nt9z 8 күн бұрын

A fast recovery for Duncan. He's a good man. Also this vid. Was mega,mega,mega. So much work got done It's amazing. You guys are on fire. Not like the burning fire.more like in the speed of production.just saying.😂😂😂😂😂

@JamesBond-xq3tw 8 күн бұрын

Get well drunken ,your at champ .

@jackdbur 6 күн бұрын

There are these things called rivnuts/nutserts that are squeezed in like rivets that make jobs like those much easier.

@jonahrens1274 8 күн бұрын

You could really use some rivet nuts

@waterwonderland5667 8 күн бұрын

Lithium batteries do not need to be vented since they do not produce hydrogen gas. They may need to be ventilated to prevent overheating though.

@Amonephis 8 күн бұрын

yeah i've been confused about that since they built that box, the only time they offgas is when they are on fire but you got other issues at that point.

@chris7643 8 күн бұрын

It’s law in Australia now to vent lithium to the outside world

@dcallan812 8 күн бұрын

Ah boat Yoga, its good for you. 🤣🤣 Great update 2x👍 cycle shorts would be a nice change ☺😉

@richardclarke8585 8 күн бұрын

Never welded a thing in my life but somehow mesmerised by your skills and attitude , best besties , from an old wooden boat sailor :-)

@ProjectBrupeg 8 күн бұрын

Thanks Richard. Equally mesmerised by the skill wood boat builders can wield. Mutual respect

@ChrisHarding-lk3jj 7 күн бұрын

You should be using c10100 copper bar stock for bus bars.

@geir.mathello 8 күн бұрын

I saw the last video about the placement of batteries. The went right in according to your plan. Cherrs and hugs from Norway

@president2 8 күн бұрын

Love it so much keep it up as always 💘

@jamesedwardson605 8 күн бұрын

Keep up the good work....

@gordonagent7037 8 күн бұрын

Damo, have you made a list of all your essential electrical switches, components etc so that you have spares available if they fail at sea. Also, have you kept diagrams of pipe work etc so that if anything should happen to you at sea others will have some ideal. Also, what about some nameplates, valve descriptors etc. just a thought as everything’s fresh now but you don’t want to have a problem down the track. Also, please convey everyone’s best wishes to Duncan, hope he has a fast recovery because I’d love to have a beer with Duncan cause Duncan’s me mate. Catch ya next week guys, have a good one

@rodneylee4026 8 күн бұрын

Oh that boat traffic is just because it's shark week, which includes a day known as shark independence day. .

@gabbylinks 8 күн бұрын

Don't break that gumball like I did mine

@buellb0y 2 күн бұрын

*gimble

@mojo6524 8 күн бұрын

Heh Q&A gave the box a CAT SCAN!

@halburtonwarrington-minge3434 8 күн бұрын

Really needs a Lab report though! and a PET scan.

@1breematt 8 күн бұрын

For none experts...Pease cover the battery terminals while installing. In case they strike the alloy at the same time

@ProjectCrystalJane 6 күн бұрын

Hey guys. Looking forward to going through your vids to avoid mistakes on our project. Dad has been watching you guys for years. We’re just starting our rebuild of a 65ft ketch that dad built.

@jerrydutra3225 8 күн бұрын

All that weight lifting! Hercules! Hercules!😁

@j.hoppli4657 8 күн бұрын

wiring the batteries will be much fun... in which way the cables come out of the box?

@kaharry055 8 күн бұрын

Just a suggestion in case you haven’t already done so, you could slip lengths of tube (garden hose or clear tube) over each of the threaded rods which hold/clamp down the lithium batteries to prevent the thread chaffing the battery case with movement over time. As the batteries seem to be secured in the centre there could be potential for them to wriggle with the movement of the boat. Also did I miss where the cables are going to go through the battery box to connect everything up?

@ProjectBrupeg 8 күн бұрын

You didn’t miss anything, the cable glands haven’t been fitted yet, was waiting until Damon is here to be sure he is happy with gland layout before we cut the holes for them. Chafe won’t be an issue with these clamps. If the batteries are moving such that the threads can ever touch the batteries we haven’t done them up. Once done up the batteries cannot and won’t move.

@jossmaxwell00 7 күн бұрын

Jobs getting closer to being completed regarding the electricals. Much kudos to jess and dame for this. Duncan I had a mechanical Aortic heart valve replacement done in 2015. Still going strong today. Good luck mate on your recovery.

@mumblbeebee6546 8 күн бұрын

Back-breaking work - well done, both of you!

@MsJon52 8 күн бұрын

just to add, I am prepaired to take down and delete previous message, lol

@BillyBob38846 7 күн бұрын

Good job! Everything is coming along great and it won't be much longer before Brupeg is on her way. See yall next week, take care guy's! 👍

@jaffasoft8976 8 күн бұрын

Could put a nice cut DIY gasket of rubber between the aluminum plate and the devices bolted on the engine plate.

@bubblez_x_beast8721 8 күн бұрын

Excited to see what new furniture you guys get in the space, admittedly I was really hoping you'd replace it soon 😅😂 the boat is too nice to have subpar furniture!! What could be really nice might be some built ins with storage underneath or a pull out bed for visitors. Just a thought though, love the progress and so excited for travels soon!!

@jwb8335 5 күн бұрын

Fitting out the interior is a whole new chapter, and at least another go fund me down the line..

@robtheplod 7 күн бұрын

Great to see all the Victron kit going in... nice!!!

@davidbatkin3976 8 күн бұрын

Good work Damo, Will be interested to see how you get cables on the battery terminals in such a tight box , but I’m sure you’ll come up with a crafty solution !

@Bullshit1011 8 күн бұрын

Great work guys .❤

@secretsix6 8 күн бұрын

people always say "found it in the last place that i look "if you find it you stop looking lol

@KeithRowell 8 күн бұрын

Eyecrometer...handpounds...😂😂😂 !!!

@jimcalver-oj4xf 8 күн бұрын

Interesting, the battery box. Very nice as per most all your work. However, how do you plan to maintain the terminals on the batteries? We have 4 x 200 amp-hr 12vdc on our 43' trawler. I check the battery terminals every 6 month and have found somewhat loose bolt connections, even though the OEM (stainless) lock washers are used. The threads are greased with no-alox so no locktight used for better electrical connection. Torque down again and cross fingers. I also check with a non-contact thermal gun to see if any connections are heating during high current conditions. ALSO, please bond the metal battery case to the DC ground. Or, check that the metal bolts connecting the battery case to the floor are a good electrical connection back to the common DC / AC ground point. Good luck!

@rolandtb3 8 күн бұрын

If only I had a bigger boat. Hmmm.

@mattpalmer5890 8 күн бұрын

I think those German Captain "Gnomes" are called Klabautermanns - my business name is Klabautermann Marine

@jasonhowell5886 8 күн бұрын

Damm Damo I wanted to know.. ??

@zavats 8 күн бұрын

These regulators last much longer away from excessive heat .

@1425race 8 күн бұрын

Nice work with the battery install, isn't it great that they are a quarter of the weight of lead acid. Re stainless fasteners into alloy - although you put nylon washers to insulate the head of the screw from the alloy there is still a risk of corrosion from the thread piercing the alloy.. We use a very good product in NZ called Duralac. This is a lanolin-based epoxy sealant that sets hard and totally insulates the whole fastener from the alloy. Should be available in Aus - worth a Google

@secretsix6 8 күн бұрын

Count von Count

@tas32engineering 8 күн бұрын

Confined space money in the torpedo tube wasn't worth it when they shut both doors. Nice to be near to safe departure. Do you have the items that you can't get easily once out to sea. Good to have 1 or 2 extra crew. But safety is number 1 once out past the seawall.

@chadwynia5021 7 күн бұрын

Surprised victron doesn't make any rack mount batteries

@ThePaulv12 7 күн бұрын

Remember the Chockfast dam imbroglio? We can all have a laugh now.... Inline 6 engines are naturally very smooth - in fact smoother than a V8. Just because a V8 has more cylinders doesn't make it smoother. The characteristic V8 beat is demonstrating the issue. I can't be bothered going into it. Inline 6 has perfect primary and secondary balance - the only real issue with them being the long crankshaft which can be source of torsional vibration under high load at certain RPM but the large mass of the front torsional vibration damper controls that. Plenty of cat in this vid. I like that cat. I feel cat will adapt well to a life at sea. It might take a bit of time. I'd suggest letting cat go where cat wants to go when underway at first. There could be a few 'sick up' incidents but soon enough Cat will find a nice hidie-hole and will eventually become a fully fledged bold sea cat, sitting on charts in rough weather while you're trying to read them and doing all the annoying things we love to hate about them.

@kevinwayne7546 5 күн бұрын

the vibration will degrade it. Period!

@ProjectBrupeg 5 күн бұрын

The electrician just confirmed this is incorrect as long as everything is tightened as normal.

@assassinlexx1993 7 күн бұрын

Would you mount a thermometer. To keep a eye on the temperature in battery room.

@greens007 7 күн бұрын

Couldn’t you just have mounted the battery switches onto a (wooden) shim to negate having to bend the copper bars?

@swedishkev 5 күн бұрын

Good job guys. When are you going to take away that horrible shiips wheel and put the new one on. Really spoils the bridge.

@johnjohn-ed9qt 7 күн бұрын

16:55 I, and my coworkers, can attest that no, a bigger boat won't help. In fact, the bigger the boat, the more of those fiddly little spaces can be crammed in. (We have done many a repair job on a >300m container vessels. In those spaces. That the path to, from the gangway, involves a number of other such.) I would curse all marine engineers for designing such, but if they didn't, my income would drastically drop.

@pmacgowan 8 күн бұрын

You have put the battery box in, how are you going to get the batteries in ? have you left enough room ??? ... yes ... they are going to have to come out again to be wired up :-(

@raymondnybakk1311 7 күн бұрын

Aluminum and stainless don’t go well together. Galvanized and aluminum works a lot better.

@jackhammer4585 4 күн бұрын

Noticed some maybe hydraulic/water high pressure hose in the electronic/battery room? @11:22 Will that location be permanent?

@ProjectBrupeg 4 күн бұрын

It’s stainless water pipe. Unfortunately it’s not possible to move that pipe work to a different location. It’s sealed up tight with threaded fitting and no hose clamps in sight, and we have drains in the battery room should a leak ever occur. A lot of discussion with our two electrical guys has happened regarding these pipes and they are both happy with the solution we have in place

@SV_Autumn 8 күн бұрын

Liked the video, What size are your batteries?

@jeremyd9826 8 күн бұрын

25.6v 200ah

@gregorythomas333 8 күн бұрын

Just curious...where is the fresh air intake for the batteries? There needs to be flowing air in so it can be sucked through...then flow out through the exhaust vent.

@ProjectBrupeg 8 күн бұрын

Lithiums don’t require air. This vent is in theory never going to be used. Its only if the batteries ever off gas (not fire as these are lithium iron phosphate batteries not lithium ion).

@gregorythomas333 8 күн бұрын

@@ProjectBrupeg Ah...okay :)

@hendrijp2 8 күн бұрын

You mean 24inch pounds??

@ProjectBrupeg 8 күн бұрын

@jamescostello6529 7 күн бұрын

Jess you scared me when you and Dame were handling the battery box through the pilot house. You were itchy feeting it around stuff on the floor and as someone like you wit knee issues it only takes a 1/4" misstep and you're down for the count. Please be careful. We don't want you back in your rolling chair.

@ProjectBrupeg 7 күн бұрын

Thanks James. Yes being very careful. J