Royal Enfield Interceptor 650 Project - Ep.2 Air Filter & Custom Panels

Рет қаралды 35,095

Күн бұрын

The Royal Enfield Interceptor 650 Project Episode 2 has taken longer than I would have hoped, but I've been waiting on parts. The replacement uprated DNA air filter arrived, so I'll fit that and whilst I'm there I'll take you through the steps on how to knock up some custom Interceptor side covers with just a few simple tools.
You can find more info on the DNA filter at tinyurl.com/DNAfilter
Tools for the job;
Gold Mesh - tinyurl.com/goldmesh
Glue Gun - amzn.to/3aAuK8X
Hole Saw Set - amzn.to/39bZP2h
Step Drill - amzn.to/3mqYyau
Allen Key Set - amzn.to/3zmIU7P
Torx Key Set - amzn.to/3NpDWvc
Cordless Drill - amzn.to/3zo9I7R
00:00 - Intro
00:22 - Thanks for the feedback
01:32 - Why a DNA Air Filter?
03:24 - Air Filter Installation
05:04 - DIY Custom Side Covers
06:42 - Drilling the cutouts
08:50 - How to prep for paint
10:34 - Painting the side covers
13:10 - Fitting the mesh grills
15:02 - Wrap up and what's coming next!

Пікірлер: 227

@lordpunter6188 2 жыл бұрын

‘Save your effort, I don’t care’ - love it 😂

@RocketMan_Moto 2 жыл бұрын

Thoroughly enjoyed that, nice job! Just the sort of unnecessary and therefore absolutely indispensable tweaking I like doing to my bikes😀

@mancavemoto 2 жыл бұрын

Cheers

@oliverleifadams2003 2 жыл бұрын

Loved the side panel mod. Can’t wait to see the final version. I modified my Interceptor (obv essential mods only). Mod haters are mostly jealous types. 99% of owners will change something. The stock bike is ripe for improvements. I’m now onto a 790. 👍🏼

@Spartansrule118 Жыл бұрын

why did you get rid of the interceptor?

@oliverleifadams2003 Жыл бұрын

@@Spartansrule118 My wife has it now, it is such a lovely bike. The 790 has gone. I have an Aprilia Tuareg at the moment. Great bike.

@jimmyjam8795 2 жыл бұрын

The interceptor was built to be a basis for modification, I bought mine to see what all the hype was about and after a year and 3000 miles covered I sold it. It was my second bike and I absolutely loved my time with it. Might buy a Conti GT in future. Good bikes.

@JensAddictions 2 жыл бұрын

That's a great result, Tony - it came out looking really, really good!

@JohnSmith-xw5qe 2 жыл бұрын

Your bike, you bought it, you do wot you want with it! If someone don’t like it Tough! Some people seem to forget wot Royal Enfield put out on the launch of the Interceptor! I Remind You! MAKE IT YOUR OWN!! Keep up the good work

@mancavemoto 2 жыл бұрын

Well said!

@davidbates5310 2 жыл бұрын

Looks great, looking forward to the rest of the project

@moto_cal 2 жыл бұрын

Side panels look fantastic. Great job. Amazing what can be done with a rattle can and a bit of patience! Looking forward to the rest of this series.

@mancavemoto 2 жыл бұрын

Thanks 👍

@flightis3dollars 2 жыл бұрын

Side panel turned out real good. Enjoying this build so far as both content and presentation goes.

@mancavemoto 2 жыл бұрын

Cheers

@larrywade9041 2 жыл бұрын

I simply loved that video-bravo! Especially the beginning where you politely told the naysayers to piss-off. Exactly said ; its your bike. Keep up the good work!! Your friend from the other side of the pond. Illinois, USA

@mancavemoto 2 жыл бұрын

Cheers Larry, hope you’re keeping well

@michaelmclarney1994 2 жыл бұрын

Excellent job, I love the mod and hadn't thought of that myself. I will definitely try it when I come to my own custom build one day. Thanks for sharing 👍

@mancavemoto 2 жыл бұрын

Cheers Michael, much appreciated

@willgarrod9907 2 жыл бұрын

Really enjoying this series Tony, many thanks.

@MarmiteTheDog Жыл бұрын

Really looking forward to see this series. RE designed the 650s expressly for customising, despite comments from a bunch of ignorant Muppets.

@mancavemoto Жыл бұрын

cheers Jason

@mattmoto650 2 жыл бұрын

Niccccce! Loving the panels you made. I've got multiple plans for my 650. So far I've changed exhausts from Tec and recently the standard rear light cluster for the Baak set, but for just putting the new light closer on it has more than doubled my insurance!! So I might need to spread these mods out. Keep them coming 🙌

@mancavemoto 2 жыл бұрын

Cheers. Ive got a number plate holder coming which has mounts for indicators. I'm probably going to run with 3 way rears, so there'll be no central rear light.

@robs4006 2 жыл бұрын

Good to see you at Gold Top last weekend Tony, looking forward to seeing more videos in the series and some suggestions for alternative video stories we talked about. Regards Rob

@KrautsAndRusskies 2 жыл бұрын

Great job! I love mods that look good and are functional. I don't understand how people can be upset by this, it's not like you're modding a historical bike

@christopherreed442 2 жыл бұрын

Nice job. Looks like a smart bike, nice colour scheme.

@peterk6077 2 жыл бұрын

Nice work Tony! You’ve got a pro finish on that panel. I went for the K&N filter definite air flow improvement. I’ve even convinced myself there’s a performance gain!

@mancavemoto 2 жыл бұрын

Thanks Peter, i'm pleased with the way they turned out. I think both the DNA and K&N options are pretty much the same

@sagarmeena0210 2 жыл бұрын

love this colour scheme on interceptor

@surfbum72 2 жыл бұрын

Great job Tony. I think the side panel looks mint! 👌

@mancavemoto 2 жыл бұрын

Cheers Matt

@neelavbarai7088 2 жыл бұрын

I am a RE owner and I loved the Ep1 of this series. Don't worry about the comments, RE bikes are built like a blank canvas and they are made to be modified. Keep up the good work.

@mancavemoto 2 жыл бұрын

Cheers, yep i'm not worried, just strange that people get so worked up about it

@davidclark2863 Жыл бұрын

Love the side panel. Can’t wait to see episode 4 ✌

@mancavemoto Жыл бұрын

Cheers, Episode 3.5 has just gone live!

@bobbyfranklin5924 2 жыл бұрын

I'm loving this series

@mancavemoto 2 жыл бұрын

Thank you

@williamarends9879 5 күн бұрын

Side panels look awesome! Nice work mate

@pradhumanmathur7445 2 жыл бұрын

Those side panels are looking stunning🔥

@mancavemoto 2 жыл бұрын

Cheers

@arnoldsmith4814 2 жыл бұрын

Cannot wait for the next episode, I'm going to buy a Royal Enfield because of you!

@mancavemoto 2 жыл бұрын

Thanks Arnold. I'm doing this in realtime so there are currently gaps in the episodes as I'm struggling to get a lot of the perts I need.

@JT-et7ui 2 жыл бұрын

Great video Tony.

@Avigazed 3 ай бұрын

WOW Man! That sidecover was brutally destroyed. I can just imagine some guy in the USA losing his mind over that. Many years ago I put chopper handlebars on my Honda MT50, and changed the front fork for a much longer one. The bike looked rediculous it was mine.

@ericmagnusson1990 Жыл бұрын

Looks great!

@mancavemoto Жыл бұрын

Cheers

@marceugeni Жыл бұрын

Loved so much the side panel man!!! Really Really nice!!!

@mancavemoto Жыл бұрын

Thanks a ton!

@crumpet_ 2 жыл бұрын

Great series, superbly crafted vids. Cheers!

@mancavemoto 2 жыл бұрын

Many thanks!

@calknight1666 2 жыл бұрын

These are such great bikes to modify to your own style. My Interceptor has flat bars with risers, 2 in to 1 exhaust (massive weight saving), DnA filter, single touring seat and Conti GT rear sets (I recommend that one)

@mancavemoto 2 жыл бұрын

They are, and I’ll check out those rear sets. Cheers

@verdonrocksphotography3510 2 жыл бұрын

look at you Tony, love those kind of videos, cheers and thank you, V

@roviwoteap2375 2 жыл бұрын

Nice job there Tony! Simple mod, but effective.

@mancavemoto 2 жыл бұрын

Thanks 👍

@DEeMONsworld 2 жыл бұрын

I like your philosophy on this bike. I have its twin brother, had it for two years now, all I did was install a Two into one decatted exhaust (TEC), aftermarket air filter and custom snorkel, and I did one other controversial thing. I dropped the countershaft sprocket one tooth. Now the bike is an ideal two lane road tracker. 0-100(where all the fun is on a bike like this) screamer. top speed is virtually the same, but I rarely take it over 140 anyway. It's kind of like n Austin Healy sprite, sounds fast (but isn't), fun to shift, ride it wide open without going too fast. A real hoot on secondary roads,

@MrTomYeoman 2 жыл бұрын

Thanks Tony, nice job.

@bill_4359 2 жыл бұрын

Nice, looks good. I like them. I installed Moton Custom slotted side panels on my 2017 Triumph Bonneville Street Cup. They look more aggressive, and it gets rid of the Steet Cup logo for a more custom look.

@dev8546 2 жыл бұрын

Great stuff. After market side panels are sold for mega bugs but your side panel mod looks better than the rest. Fantastic job!

@mancavemoto 2 жыл бұрын

Cheers

@mrdummymail4300 4 ай бұрын

As an interceptor fan, this video was a little hard to digest, but I don't hate it. Nice build.

@basedury Жыл бұрын

these bikes are some of the best new bikes to modify. they’re nowhere near perfect from the factory, even though they look great. they’re a perfect canvas to do what you want with your bike.

@mancavemoto Жыл бұрын

Couldn't agree more!

@charlieconghos 2 жыл бұрын

Well done Tony! I did the DNA filter and bellmouth to the Bonnie, I like the holes on the side panels, I will think about doing them! By the way, it was good to see you last weekend!

@mancavemoto 2 жыл бұрын

Cheers Buddy, good to see you too

@skeptic3332 2 жыл бұрын

Cool look. Air does flow all around the side cover. Good way to suck in water and dust.

@mancavemoto 2 жыл бұрын

Of course, as does water and dust, this mod isn’t going to make that much difference to that, it’s more about aesthetics.

@dogfish180 2 жыл бұрын

Nice job! Looks ace!

@mancavemoto 2 жыл бұрын

Thanks!

@marksouthern4024 2 жыл бұрын

Nice job - looks really smart 👍

@mancavemoto 2 жыл бұрын

Thanks

@lpete531 2 жыл бұрын

Nice work 👍🏽

@gabynox Жыл бұрын

Thanks mate. Nice job

@mancavemoto Жыл бұрын

No problem 👍

@TheSweetasanut 2 жыл бұрын

Lovely job

@mancavemoto 2 жыл бұрын

Cheers

@henryhartley9993 2 жыл бұрын

Nice one Tony....

@disco41 2 жыл бұрын

Top job Tony 👍👊

@mancavemoto 2 жыл бұрын

Cheers

@TheClassicMotorcycleChannel Жыл бұрын

Great video :)

@mancavemoto Жыл бұрын

Thanks!

@gt650johnn 2 жыл бұрын

This bikes are begging to be modded once you take them from the dealership! Great job with the side panels. I went with new ones on leather, but I might just go back to the stock ones and do something similar. I have fitted the DNA filter and new pipes on mine aswell. The brakes and suspension on this bike really benefits from the weight loss. Check Hitchcock's offerings on parts to get the best of this bike, loving this series!

@ronlabusch6786 2 жыл бұрын

Great ideas you signature of your ride well done

@bapuleto 2 жыл бұрын

I like your project, greetings from Spain!!!✌🏼

@mancavemoto 2 жыл бұрын

Muchos Gracias!

@drmachinewerke1 Ай бұрын

S&S exhaust pipes on mine . Will change air filter soon . Not sure what after that . I just like the sound of the exhaust . I'll be adding a pannier frame and rack . Along with tires that work better on gravel unpacked roads .

@benstudley9332 2 жыл бұрын

Love this

@mancavemoto 2 жыл бұрын

Thanks

@F7AS3R 2 жыл бұрын

Super video, love all your films Tony, they’re great reference and brilliant to follow. I’m a custom Triumph rider but I was over in Lyon and rode the BAAK interceptors from their workshop over a few days. Great fun bike on and off the road and they’ve done a great job with their bolt on kits too. Have you seen them? Look forward to the next episode… loving the new side panels….

@mancavemoto 2 жыл бұрын

Thanks, yes there may be a few BAAK bits going on this bike at some point!

@bertrandlemetayer9248 2 жыл бұрын

Great video ! Many advices to personalize this Interceptor. Very impatient to own this 🏍 !

@mancavemoto 2 жыл бұрын

Thanks! 👍

@brianperry 2 жыл бұрын

I believe that any 'mod' that lets the engine breath easier is a good idea.( I swopped out the original air filter on my Street triple, Plus a new slip on exhaust)... this let the lungs of the engine work more efficiently and gave a smoother throttle response. Items like bars, levers, seat etc! are the comfort zone. Tyres and better quality suspension improve the ride not to mention the handling.... You're right, its your Bike, your money so personalising it to your requirements is your decision... personally I would turn it into a 60s Cafe Racer, Or would if I still had a 1960s body to contort myself into the proper riding position...Its a personal choice so go for it!! Will follow with interest future videos on the project..

@dannyfrommiami Жыл бұрын

Love the intro hahaha. People care more about your bike than the bike they probably dont even have.

@mancavemoto Жыл бұрын

Thats true Daniel...

@paulbrook2459 2 жыл бұрын

Top job 👍

@mancavemoto 2 жыл бұрын

Thanks 👍

@stephendove5306 2 жыл бұрын

I have done similar to my 2020 Glitter & Dust Interceptor , started with DNA filter then a Booster Plug and S&S slip on pipes (a bit more BARK ) as for the side covers I bought the aluminium ones from Baak (A French Co) and polished them up to a nice finish , like you I backed them with a fine mesh which I painted red to match the tank badge , I'll be interested to see how much further you go . Ride safe and keep the rubber side down !

@allanmason7544 2 жыл бұрын

nice work brill video

@mancavemoto 2 жыл бұрын

Thanks Allan

@hossp2365 2 жыл бұрын

Nice job Tony. I would have loved to see the panel opened up with a serious of 1/2” holes parallel with the interceptor arrow. Keep up good work.

@mancavemoto 2 жыл бұрын

Cheers, I'm still thinking about doing another set with something different

@andyhorton1472 2 жыл бұрын

sorry you had the feedback about modding your bike. To me that's part of personalising the bike and is also part of the fun. I love my mods on my Interceptor. I have different mirrors, bash plate, exhaust, air filter, rear lights etc etc..... I'm looking forward to seeing what do you. keep making the vids.🏴󠁧󠁢󠁷󠁬󠁳󠁿👍

@mancavemoto 2 жыл бұрын

No worries, it doesnt bother me, its just funny how stroppy some people get, and quite personal at times. Sad really

@everythinggaming7938 9 ай бұрын

so cool. its much nicer doing it yourself as opposed to buying one, you get more satisfaction knowing you did it

@Shinysideup 2 жыл бұрын

Though the panels came out nice. Good job simple but effective.

@mancavemoto 2 жыл бұрын

Thanks!

@johnalleman1134 2 жыл бұрын

Well said!!!!

@stevesteve1965 2 жыл бұрын

Really enjoyed that. What frustrates me with these critics is they have completely missed the whole point of Triumph (Bonneville range) and Enfields (650 range) is that they have decided to make a basic package to present to the buying public in various different engine and trim levels/styles. So if you just want a basic bike at that price 'We can provide that for you sir/madam' however knowing what some sections of the motorcycle community are like they can provide a bike that is a starting point for you to upgrade /modify at your leisure. That's the whole point of the range of bikes! It's for you to fiddle with and it's OK if you don't want to. Really looking forward to this build series 👍

@tinks43 2 жыл бұрын

Looks brill Tony, well done! The haters are going to hate you even more after that 🙈🤣

@luisloya1120 Жыл бұрын

I Love the look of your bike. I am looking to but my Interceptor 650 in the same colour.😀

@mancavemoto Жыл бұрын

Cheers, Go for it!

@revelationakagoldeneagle8045 2 жыл бұрын

It's your bike, do with it what you like! Don't worry about the naysayers. Thanks for sharing your ideas.

@mancavemoto 2 жыл бұрын

Thanks, will do!

@danwinters3948 Жыл бұрын

love what you are doing ! would like to do a street tracker out of one of these !

@mancavemoto Жыл бұрын

You should!

@johnk7814 2 жыл бұрын

Thats a good idea with the side panel, but I think I'll go with slots from the front half of the panel where the filter is like I've seen on some bonneville's. Sure that will be harder but I think it would look good. I already have the filter and booster plug and a whole lot of mods 😎Cheers

@mancavemoto 2 жыл бұрын

Cheers, yep I went with holes as they are easier to cut 😉 but I may try something different on another set in the future?

@soumoksarkar1989 Жыл бұрын

Installed a gursewak exhaust and bmc filter.... I can vouch for the improvement in acceration and general improvement in the "feel of the ride quality"....

@tonywilliamson4512 2 жыл бұрын

well said to all the negative ones,your bike your stamp,i like it.

@grahamhiggins1 2 жыл бұрын

Nice neat job. Looks good aesthetically. Glad it’s not for performance reasons as it would make more sense to buy a Fireblade! An interceptor is a joy and not really for tuning, as opposed to refinement.

@Deployable- 2 жыл бұрын

Waiting for the exhaust video!

@mancavemoto 2 жыл бұрын

I’m still waiting for the exhaust!

@PretheshP Жыл бұрын

Love from India

@mancavemoto Жыл бұрын

👋

@geneahart5607 2 жыл бұрын

Great video Tony! If you really feel artsy a thin gold pinstripe around the area where the holes are would make it look like a paint shop did it. Just a thought.

@mancavemoto 2 жыл бұрын

A good idea, but beyond my capabilities I think!

@buster8847 2 жыл бұрын

Gives it a nice premium look. And also fuck what anyone else said about modifications. Iv bought my interceptor not even picked it up yet and my garage I have big bore pipes and cans, sumpgard, yss rear shocks, dna filter kit and removing tail light set up soon as I get it home 3miles from the dealership hopefully Thursday

@mancavemoto 2 жыл бұрын

Cheers Buster, enjoy the new bike!

@karlsquire8148 2 жыл бұрын

Love the vid, great job, I'm the same as you I'm just looking to make my 650 run as efficient at possible, not really increase HP. Have you considered Iridium spark plugs, bigger spark insures a better burn of the full air in the combustion chamber. I changed my plugs to Iridium, could be in my head but the bike does seem to run smoother.

@mancavemoto 2 жыл бұрын

Cheers, not something I’ve thought about to be honest, but I’ll have a look at them. Thanks

@joel.rundle 2 жыл бұрын

Yay!

@GapBahnDirk 2 жыл бұрын

The side panel looks good! I will be interested to se which tyres you choose. I am planning to use Dunlop K180 120/90-18 front + 130/80-18 rear, when the time comes to replace the Pirellis and they will fit on the original rims.

@ruahinesrider 2 жыл бұрын

New bike,cheap asking to be modded.I done a heap of them.I Often thought about drilling the side panels cause they better than any aftermarket one's & some of their holes & mesh are just glue over top of stock don't suck air or face the wrong way.

@mancavemoto 2 жыл бұрын

Yep, its easy to throw loads of money at the bike in parts, but theres a few simple mods you can make without needeing too. At the moment, mine are one off side panels!

@karlsquire8148 2 жыл бұрын

One of the things I love about these 650's is you can make them your own lots of after market parts to make it cosmetically your own and lots of performance parts if you want a wheelie machine, Purists are like a blank canvas, pretty boring people. Go for it.

@mancavemoto 2 жыл бұрын

Exactly, thats one reason I chose the Interceptor. Plus its good fun to ride as well!

@stevesanelli90 2 жыл бұрын

Great result Tony! Looks very professional & can you go back & also apply satin black to the lower section? You could also do it on both sides identical 🤔✅ Too late to get an Aussie made Verex exhaust from Tasmania?

@mancavemoto 2 жыл бұрын

Yep, I did of course replicate it on both sides. (as you can see on the thumbnail) The gloss lower actually blends nicely with the frame, so i'm happy with the result. The Verex looks great, but I'm going with something smaller ;)

@TheSweetasanut 2 жыл бұрын

Thank you Tony sorry to hear children have been rude .

@mancavemoto 2 жыл бұрын

It’s more weird than anything else

@johnalleman1134 Жыл бұрын

Tony, a great video - thanks. Can I ask you…. When you said nowhere near the chain - would you be kind enough to throw a ruler in there and a have a quick measure please? Not worried about the chain guard, but would love to know the distance from the tyre to the chain. Thanks very much.

@TictacAddict1 Жыл бұрын

Agree 100%. It's your bike, do as you please. Pay my bills and maybe I'll listen to your opinions.

@mancavemoto Жыл бұрын

👍

@leegingerninja 2 жыл бұрын

Great vid mate 👍🏻 fantastic tips for painting 😉. Rightly said at the start! 😉 Your Bike Your Rules! ...... One complaint though........ ........ ...... ..... Your Hoody drawstring was giving me anxiety!!!!!!😵‍💫🙆🏼‍♂️🙆🏼‍♂️🙆🏼‍♂️🤣🤣🤣🤣🤣. All the best mate😜👊🏻

@mancavemoto 2 жыл бұрын

Haha, I left it like that just for you Lee

@leegingerninja 2 жыл бұрын

@@mancavemoto 😳🤯😳. 🤣🤣

@karlj1717 2 жыл бұрын

I’m into keeping things as original as possible but I love seeing custom bikes, some of the things people do are amazing. Looking forward to seeing what you do with yours.

@mancavemoto 2 жыл бұрын

I agree, its down to individual choice I like stock as much as i like custom. Each to their own

@johnkraemer5505 2 жыл бұрын

Very nice mid. What about riding in the rain and getting the filter wet? Is this a concern? Thanks!

@mancavemoto 2 жыл бұрын

Thanks, not really it’s a fair weather bike, and in actuality the holes will pull in very little water when moving

@terenceokeeffesmotorcyclestuff 2 жыл бұрын

I would think there would be a lot of interest in a tubed to tubeless wheel conversion.

@mancavemoto 2 жыл бұрын

That is something i'm currently investigating

@terenceokeeffesmotorcyclestuff 2 жыл бұрын

@@mancavemoto Brilliant, that will be interesting. I was lazy and got my CB1100 wheels done in Italy by Bartfactory but live in Ireland so there were no duties re Brexit. Outex must be the most common for doing it yourself. Good luck. While you are at it you might as well try out some cheapo tyre pressure monitors.

@mattwilliams9758 2 жыл бұрын

Nice vid Tony. Mod away, just don’t end up like TMF (with the world most expensive 650 😂)

@mancavemoto 2 жыл бұрын

Cheers. Yep he got royally shafted by that company. I was chatting to him at the Bike shed Show about it.

@LessAiredvanU 2 жыл бұрын

Will you be adding a deflector in front of the side panel, so you won't be sucking in air heated by the cylinder while riding. I have seen that suggested on other vids dealing with cutting breathing intakes in the side panels.

@mancavemoto 2 жыл бұрын

I won't Mark no, to be honest I dont think the holes will make that much actual difference other than aesthetics

@maxwellportlock2119 2 жыл бұрын

Hi love the gauze. Never done glue stuff before . Are there different types glue sticks? cheers

@mancavemoto 2 жыл бұрын

Not sure mate, I just used the sticks that came with the glue gun. They seem to do the trick for most materials

@toddcott9510 Жыл бұрын

Anyone who annoys American's is fine with my. I like what you are doing with the bike. Good luck.

@MichaelDisney 2 жыл бұрын

Great installation. Don't you need to oil it with hydrophobic oil though? That's what the instructions with my one said. It would be interesting to see how much more it weighs than the original. As for no expected performance increases and being entirely hidden, i'd say that was 85 quid (plus the oil?) well spent! At least you fitted your one. I wait with interest to see what rim and tyre you fit and how it all works with the swing arm, frame and chain. Good luck, old bean!

@mancavemoto 2 жыл бұрын

It comes pre-oiled, so It can go straight in. I have a service kit too, so i'll cover that off later in the series

@nigelren3719 2 жыл бұрын

Nice! I was sceptical but turned out pretty cool. (Not that he cares)

@micaelalves6804 2 жыл бұрын

Don’t mind the guys talking about modding, Royal Enfields are asking to be modded in my opinion, the retro look and lack of plastic parts adds to this

@mancavemoto 2 жыл бұрын

I'm not worried about that, it just makes me laugh how they get so worked up about it!