CNC mill to CNC lathe

No video

CNC mill to CNC lathe

Рет қаралды 15,981

Күн бұрын

Here is tool fixture which will turn you CNC mill to CNC lathe. With this tool fixture every tool can be adjusted for easy set up

Пікірлер: 51

@mikedevine4667 3 жыл бұрын

You make building and getting this stuff to work together look to easy.

@ContractCAD 3 жыл бұрын

We've been clamping turning tools for years as a great way to modify tool holders. I'll never forget the look of horror when I took the idea into a new company (a company without proper machinists before I got there). This is a great set up though and something I've considered -- all except for the mounting of a chuck so thanks for that :)

@drewgossage8842 3 жыл бұрын

Another great installment Vince👍👍

@advanceair 3 жыл бұрын

Thx Drew

@eugencsl 3 жыл бұрын

Nicely done ! 👍🏼👏🏼

@marcingolab6227 3 жыл бұрын

I really need to get going on a project like this for my tool room mill because mistakes were made and I didn't buy a lathe for my milling shop before getting started. Some tool holders for my angle plate would probably do the job in conjunction with the horizontal spindle. Good job and the part came out nice!

@stonecraft745 3 жыл бұрын

The Chuck is scary as hell but nice video!

@advanceair 3 жыл бұрын

It’ is ! and it so unnatural lol

@janhbrenna4264 3 жыл бұрын

So cool, could you also make a video of the cam/programming side

@advanceair 3 жыл бұрын

I’ll be using this on my next project, I’ll cover Cam part of it on that video

@janhbrenna4264 3 жыл бұрын

@@advanceair cool, im looking forward too it ;)

@revenger2111 3 жыл бұрын

DON"T SPIN THE CHUCK WITH NOTHING IN IT!! It's very dangerous, the chucks can come lose and fly everywhere! Be safe!

@RobytheFlorentine 3 жыл бұрын

Great video. Thanks for sharing :-) Regards form Italy, Florence

@advanceair 3 жыл бұрын

Thank you

@gerrit2107 3 жыл бұрын

im pretty sure the top side of a turning tool shank is on the same plane as the cutting edge, that would mean you can zero your y axis either on the shank or on the holder you made

@advanceair 3 жыл бұрын

You are right. Thank you.

@gerrit2107 3 жыл бұрын

@@advanceair No problem :) I should add that for boring bars the cutting edge is on the center if the flats on the shank are dialed in

@tonydique4554 2 жыл бұрын

Wow, that is very impressive.

@TrPrecisionMachining 3 жыл бұрын

very good video vince..thanks for your time

@advanceair 3 жыл бұрын

Thank you

@higornatan9933 3 жыл бұрын

Like you are the best!

3 жыл бұрын

omg, that why people so intelligent

@airgunningyup 3 жыл бұрын

very cool. id imagine the programming was more time consuming than the build ( loading and saving all the offsets for the tooling , the chuck face and so on

@StreuB1 3 жыл бұрын

Please for the love of god, do not spin up chucks that fast with nothing clamped in the chuck. The scroll can unwind and send the jaws flying. I have seen this happen 2 times on high speed CNC lathes.

@advanceair 3 жыл бұрын

I have flat ring inside it 👍🏻

@StreuB1 3 жыл бұрын

@@advanceair 🙏🙏🙏🙏

@julikb 3 жыл бұрын

Dont you think a guy who build machines like this knows best what to do?

@StreuB1 3 жыл бұрын

@@julikb No, not always.

@julikb 3 жыл бұрын

@@StreuB1 Also not always advisors are right.In this case for example.He said how he did it.

@aquanaut6386 3 жыл бұрын

🤔 Now I'm thinking... a rotary attachment on the x-axis table with multiple tool clamps - (a vertical CNC Lathe automatic tool changer)... rotated into position via a servo motor, probably with some kind of mechanical air-assist locking mechanism... a kind of indexing plate to lock everything in.

@advanceair 3 жыл бұрын

Don’t put that kind of ideas in my head! Lol

@soufianbenattia2532 Жыл бұрын

You are the bestttt

@volkansezer2132 3 жыл бұрын

very good idea

@matthewchastain136 3 жыл бұрын

how does your spindle spin at such low RPM. I thought those type of spindles had a much higher minimum speed.

@advanceair 3 жыл бұрын

This is 5.5kw very large spindle. I can run it as low as 900rpm

@dimimexmaquinadosyautomati8217 3 жыл бұрын

Nice work. Is wonderfull. How do you realize the program in the cam software?. How do you take references for the tools, etc?

@ozmouthpieces 2 жыл бұрын

Please, what is the code of this insert?! Your videos are great! Congratulations

@DianTomov_ST_Dupont_Lighters Жыл бұрын

How to set my cordinate system? Do I need to make a custom post processor?

@GIboy1990 Жыл бұрын

But can you cut concentric threads on a rifle barrel?

@DPTech_workroom 3 жыл бұрын

👍

@rdc02271 3 жыл бұрын

Hello, What material have you used for the fixture plate? Thank you.

@gwheyduke 3 жыл бұрын

Did you build this mill too? If not what mill is it?

@unnamer345 3 жыл бұрын

wow

@GReddyDaG 3 жыл бұрын

500 RPM on an empty chuck.. don't do this at home kids! Maybe you should now make a mounting plate with a direct mount for your spindle?

@advanceair 3 жыл бұрын

There is a flat washer inside the chuck. Would love to make direct mount to it at some point just need to figure out how to

@daboyakasha101 3 жыл бұрын

@@advanceair buy another tool holder, something like a threaded body tool holder, or something with a lot of "meat" in and near the taper portion and turn the holder for an adapter directly on the spindle, then it'll be perfectly concentric.

@advanceair 3 жыл бұрын

@@daboyakasha101 Working on something like that :)