Vintage Troy-Bilt Tiller Has Issues

Рет қаралды 153,145

2 ай бұрын

A local subscriber "Stanley" was given this tiller when the original owner no longer had need for it. Stanley realized it was too big for his needs and maybe more then he bargained for so he passed it on to us. It ran when last used. How bad can it be? Lets get this 1980's Tecumseh powered Troy-Bilt Junior tiller back to work.
Tiller Model: 15006, 15006, 15006, 15021, 50126, 50127, 50173, 50204, 5311, 5611
Engine Model (HS35): H35-45593R
Reverse Belt: Troy-Bilt 50134 (Superseded to GW-50134) (3/8" x 27.65")
Forward Belt: Troy-Bilt 50161 (25" x 0.5")
Wheel Seal: Troy-Bilt 9621 (Superseded to 921-04031)
Tine Seal : Troy-Bilt 9613
Main Input Shaft Seal: 9600, GW-9600, GW-1983632, 1983632, GW-85030, GW-H213556, 85030
I no longer use Harbor Freight Super Heavy Duty Degreaser in my ultrasonic cleaner. Harbor Freight changed the recipe. The bottle previously stated "NON-CORROSIVE". Now it says "CORROSIVE", "do not user on Aluminum". It now damages most carburetors. Recently I have been using Simple Green PRO HD with good results.
Visit My Amazon Store:
www.amazon.com/shop/jamescondon
3 Jaw Puller: amzn.to/4aY2TJu
Brass Drift: amzn.to/3Wrcwwq
Compression Tester (Mityvac MV5530): amzn.to/3Qxld4E
Evapo-Rust (ER012): amzn.to/4aadkZS
Fuel Line (7/16" OD): amzn.to/3WzOQWQ
Leather Punch Set: amzn.to/3ydjLy0
Simple Green PRO HD: amzn.to/3UqsXGu
Slide Hammer: amzn.to/3wClLz8
Spark Tester (ECHO PET4000EC): amzn.to/3UjpavN
Squeeze Bottle: amzn.to/4cW0GjF
Super Clean (101780): amzn.to/3ybrJYq
Tachometer (Rotary 15344, PET-1000R, Echo 99051130017): amzn.to/4ac9U8V
If you want to donate to the channel, you can use the KZfaq "Super Thanks" feature or via PayPal: www.paypal.com/paypalme/james...
#GeneratorRepair #Generator #SmallEngineRepair #SmallEngine #DIY #Fixed #Troubleshooting #HowTo
15006, 15006, 15006, 15021, 50126, 50127, 50173, 50204, 5311, 5611,Alternator,,Broken Governor, Carburetor, Clean Carburetor, Compression Test, Engine Racing, Engine Speed, Evapo-Rust, Fixed, Gear Oil, Governor Reset, Hard Starting, High RPM, How To, How-To, Junior, Leaking Oil Seal, Load Test, Make a Gasket, No Oil, Oil Seal, Puller, Repair, Seal Replacement, Slide Hammer, Small Engine, Spark Test, Stalling, Tecumseh, Tiller ToyBilt, Transmission, Troubleshooting, Troy-Bilt, Tuning, Water in Fuel, Water

Пікірлер: 448

@Buddy_HI 2 ай бұрын

James, every Thursday morning, I get my grandson off to school and settle in for my coffee and James video. Can't tell you how much I look forward to seeing something new and interesting from you every week. You are a great teacher and an inspiration to so many viewers. Thank you!

@jcondon1 2 ай бұрын

Thanks

@johncourtneidge 2 ай бұрын

Yes!

@demetriosa7646 Ай бұрын

@@jcondon1James next on the Tecumseh fuel lines take a bolt and connect it to the existing fuel line and then use electric tape and you can pull it right thru. Doneyboy has a good video on it.

@DeadKoby 2 ай бұрын

The old Tecumseh and Briggs flat head motors were so darn tough. I don't think that those classic designs get enough appreciation.

@rogerjohnson6218 Ай бұрын

yes i have a1980 + 5HP.. pony still have it...:-)

@WildwoodSubRailfan 2 ай бұрын

My grandfather had one just like this, and now I have it. They are incredibly well built machines from a different era when quality meant something.

@waffalobill 2 ай бұрын

In the late 70s my uncle started a small engine shop. We used to work,on a local landscapers machines. His guys was animals. Very hard on equipment. I serviced 6 new mowers one morning. At noon they came back with 4 of them broken. Handles broke, wheels broke. They just throw them off the truck I guessed. One day they came in and we thought it was weird the boss didn't come in or call. He ran a flower shop m as well. Guy was in a panic. They had a machine on the truck I recognized immediately. Only one I ever saw, it was the bosses personal troy built tiller. The big one. It was the biggest tiller I ever saw so I knew right away who's it was. They dropped it off the truck and busted the carb. Snapped it right off. My uncle told them it's a easy fix but it's gonna hurt. No after market back then. I remember it well. My uncle made them pay for the carb up front. It was over $100 just for the part. Plus gaskets and labor. He told them he give them the labor to help them out. It only took me a few minutes to put it on. They ponied up the money, we fixed it. Back then $100 was alot of money . Was probably over a weeks pay for a couple guys. They stopped throwing stuff off the truck.

@Dirtyharry70585 2 ай бұрын

Money the best way to fix stupid

@johncourtneidge 2 ай бұрын

Nice!

@waffalobill 2 ай бұрын

@@johncourtneidgeit is still the biggest tiller I ever saw. That old way of making stuff. Big,heavy,expensive. It was a beast. You could till up a huge garden in no time with that thing. Glad they picked it up and dropped it off for service. It weighed as much as a car. What a beast. The boss had to notice the new shiney carb on it. Not red anymore.

@jaygee999 2 ай бұрын

James, you are the consummate professional -- Each week your presentations are always worth-the-wait ! -- Thank You

@jcondon1 2 ай бұрын

Thanks

@edwardliszka837 Ай бұрын

I have a 42 year old Troy built tiller and it still works great and is the best investment I ever made for my garden. They last forever!

@michaelhinkle6648 2 ай бұрын

My mother bought one like that right after they came out. I can remember the commercial for them of a lady going along behind the machine using only one hand to control the machine with. You could do that easily until you hit a rock then you'd better hang on with everything you have because it's going wherever it wants to go. Lol great video again sir.

@Justicesdad 2 ай бұрын

1:11:15 mom?

@99andrianmonk 2 ай бұрын

I volunteer at ReStore - Habitat for Humanity's retail store - and a several years ago we had one of these come in as a donation. The donator said he couldn't get it started but when it ran, it ran well. I'm somewhat familiar with this Tecumseh engine since it was on the first snowblower my father had years ago so I had a go at it. Got it running; like yours, it ran well and smoothly. One of the guys at the store decided he'd "test" it at home to make sure it worked. He brought it back the next day and complained it ran too well. Seems that he under estimated how powerful the engine really was. While tiling he slipped and fell and the tiller dragged him for a few feet before he let go. The person who bought it was a regular customer and always talks about how well it still is running today. Don't make them like they used to.

@jerrydickson1108 2 ай бұрын

I like watching your videos. You are meticulous and patient. That machine is from an era when companies still built their products to last and be repaired. Thanks for extending its life.

@DeadKoby 2 ай бұрын

I don't want to "dump on" all makers... there are still some solid machines that can be maintained to have a long life... Those don't show up in "mart" stores though. The TroyBilt brand under current ownership is not as tough as it used to be.

@johncourtneidge 2 ай бұрын

Yes!

@MeatandTatersGaming54 28 күн бұрын

Growing up in the 80s my Dad had one just like this and when you started this machine up those engine sounds brought back so many memories back from all of those different growing seasons throughout all of those years 😎🙂👍

@jeremymcauliff8485 2 ай бұрын

I have a Troy Bilt Horse tiller. My dad bought it new in 1978. Use it every year in my garden.

@DennisBall 2 ай бұрын

Yep, same here. Pop kept about a 1/4 acre garden every year with it. Still runs like a champ!

@billfear1 2 ай бұрын

Now waiting to see a couple of rows of cabbages in your yard this year! 😄Great fix, love the video!

@johnclarke8180 2 ай бұрын

That is a beautiful machine, thank you James for saving it. Year's of use left!

@American_Jeeper 2 ай бұрын

James, you and I are around the same age, give or take a few years. I have to tell you that your videos are a Godsend, especially these last several months. Your videos help me zone out from life for an hour or so, and I thank you for that, especially since I really enjoy watching your methodology and skills being applied to these machines to bring them back to life. Thanks, man, I really appreciate it.

@johncourtneidge 2 ай бұрын

Yes!

@Willy12927 2 ай бұрын

What a sad day when Gardenway, the parent company of Troy Bilt went bankrupt. I still have my Troy Horse and it still performs like the day I bought it back in the early 80s. They are so well built that that they very seldom needed repairs but if they ever needed repair, the owners manual included a complete shop manual with step by stem directions as how to make the repairs. Although the TroyBilt tillers are still made, they are nothing as compared to the older ones.

@lot27a 2 ай бұрын

Got to love those old Troy-Bilt tillers. Very little plastic on that ol' girl. I must be crazy, but if there was ever a tiller that warranted a full restoration, it would be this one....that is, in about ten years when it was fully broke in....🙂

@robertmailhos8159 2 ай бұрын

That was made back when Troy built was the best tiller on the market before MTD made changes to Troy built company thank you for posting this video on this tiller James 😎👍💰

@georgedyson9754 2 ай бұрын

Well, I had a Troy Built tiller like this AFTER MTD owned the company and it was nothing like the quality that this one seems to have. I have rocky ground and I found that the tines were made of some sort of soft steel because they bent every time I used it. It also had some different size drive pulleys so that you could run at different speeds - you changed the speed by having a lever which raised the entire engine on a lever so that the different size drive pulley could be used. Like the tines this lever bent every time you used it. Then on a larger garden the tine width was far too small for what I needed. I sold this beast soon after and cursed MTD for ruining what was a good quality make originally.

@paulmaxwell8851 Ай бұрын

MTD didn't make changes to the company. Troy-Bilt went out of business, and a few years later the name was sold to MTD. MTD is NOT making true Troy-Bilts, just slapping the name on their products. John Deere riding mowers and Motorola walkie-talkies are the same: made by companies you've never heard of, with the brand name they bought slapped on.

@Bob-bm3pd 22 күн бұрын

BCS tillers we're far superior to Troy Built. No belts, clutch and gear selector for the wheels, pto clutch for the tines and array of implements( sweeper,brush cutter, snow blower ECT) . Tiller tines spun really fast without slippage. Check em out.

@robertmailhos8159 22 күн бұрын

@@Bob-bm3pd thanks for the info on this brand of machine

@83jbbentley 2 ай бұрын

Troy Bilt really built quality products back then. Horse and Bronco are tough.

@rodneymiddleton9624 2 ай бұрын

Great job!!!!! Glad you went the extra mile and checked the gear boxes to find the potential demise of this tiller! Thanks!

@lv_woodturner3899 2 ай бұрын

I have a Troy Bilt Econ Horse, purchased new back in mid 80's. Still running strong. Easy to start. My model had a leak in the rear seal at the end of the shaft between the tines. My shield has enclosed sides. A well made machine back in the day. Mine has seen more use than your machine. I replaced the tines about 8 years ago. Glad that the water did not damage the transmission. There was a LOT of water which came out. My machine has spent its life in the garage except for the short time tilling the garden each year. Good to see your machine back for a second life.

@General-Eclectic 2 ай бұрын

12 point sockets work well on square drive plugs.

@RC-fu6hg 2 ай бұрын

That recoil sounded ruff 🐶 but I remember those from back in 85 and they really worked well. It’s nice to see one still tilling. 👍

@toxin911 2 ай бұрын

looked after properly that old girl will last another 40 yrs, great video James

@paulteirney3587 Ай бұрын

I have the home gardener model build by Mastport and it is 44 years old and is still as when we brought it for $250 in 1980. they still this model but it cost $1500.

@biker6991 2 ай бұрын

You know it's good when he plays the tuba as the lift is going down ....hahaha

@lsj1 2 ай бұрын

😂

@neilmorten6416 2 ай бұрын

Thank you Stanley, for your generous donation and support to a worthy channel. Thank you James for another demonstration of your skills.

@k8ble 2 ай бұрын

WATCH all your goodies and knowledge everyday. It gives me back my memory and abilities to continue.

@jbilletz 17 күн бұрын

Those were great tillers. My grandfather bought one in the early 90s, and it's still running stong. I always thought the drive wheels could have been a bit slower but we have really hard dirt where I live.

@jesterr7133 Ай бұрын

Ugh. Water. I have a Troy Bilt pressure washer. When I was outside pressure washing one day, I came up with the bright idea of pressure washing the pressure washer. Being the genius that I am, I forgot about the vent on the gas cap. It took more than a year to get all of the water out of the system. I cleaned the tank and carb multiple times, replaced all of the fuel lines, and I still had water in the system. It was a nightmare.

@for2utube 2 ай бұрын

My grandfather had one of these. It was built like an old Chevrolet farm truck. The soil on his IA farm - when I put my weight onto the handles the tines sunk all the way in. That Tecumseh engine angled its nose up into the sky.

@eric_seguin Ай бұрын

My Dad laughed at me for cleaning his tiller. Just like yours. Then I bought one at a garage sale for $20. Then a friend gave me one. My sister friend had a junker off brand that she bought for someone to use on her property. They burned the belt off in one day. I fixed it. I went in the hospital for 6 weeks. All of the tillers were at my friends property except my Dads'. When I finally could walk again all 3 tillers were gone. Not to mention tools and other equipment. Should never fixed those tillers till I needed them. lol

@67mlb67 2 ай бұрын

Love the sound of an old engine like that. Music to my ears!

@ariedekker7350 2 ай бұрын

I was able to bring the peace of mind to see this report to the end. Thanks for making these moving images. See you next time.

@delekham1863 2 ай бұрын

Loved the video. If I remember correctly, those were Deep Tillage Machines. Sheesh that brings back ALOT of memories! I so wanted one 30 years ago.

@whathasxgottodowithit3919. 2 ай бұрын

James that is amazing to see the quality of the Manuals back in the day. Caterpillar always provided good manuals for repair and service with their equipment too. I should add the quality of that Tiller is first class, you would struggle to find one made like that today.

@stephenreiner1523 2 ай бұрын

Those Troy bilt made in Troy, New York were excellent machines. I have a 15 horsepower Horse which is an animal. Always nice watching James. Thank you.

@stephenreiner1523 2 ай бұрын

They throw 100 lb. rocks out of the ground like nothing. They have tractor tires on them and they will drag you. They have a high and low range transmission and they can pull you around like a rag doll.

@johncourtneidge 2 ай бұрын

Imagine stabling etc 15 horses!

@boblynch7348 2 ай бұрын

James, it always amazes me how you can come up with wiring diagrams, part numbers and torque specs on so many of these different pieces of equipment that you are able to resurrect. I would love to see a video on how you find this information. Other than that, I am always impressed with your presentation and content. Thanks.

@joshg1244 2 ай бұрын

My parents had one of these growing up and I remember it being a BEAST. My brother would have the auger completely underground and engine sticking straight up and it just went. It was only used for 30 min every year but damn was it reliable. Same thing with our chipper shredder. Same engine.

@sageflat3734 2 ай бұрын

I have the Troy Built Horse, the 8 horse power version. I believe that we purchased it in the 1970's. We till about a half acre several times a year to control weeds. It takes about 4 hours. It does an amazing job if I keep the ground soft and weeds small. Great machine!

@wesleypulkka7447 Ай бұрын

James, I worked my way through high school and undergrad fixing lawn equipment for a hardware store. It was fun to bring a non-operable mower or tiller back to life. Your videos remind me of those days 60 years ago! Thanks!

@peterk75a 2 ай бұрын

Love your clear and detailed analysis, so easy to listen to. Thanks.

@lucasstiles8012 2 ай бұрын

I just tilled my mothers garden using this exact model on Monday! We've been using a single tine toro for years, and we asked if we could borrow the neighbors troy bilt. This thing ate up the earth like nobodys business. We were done in under an hour. Cool to see this video so soon after.

@lucasstiles8012 2 ай бұрын

You gotta drop that depth lever all the way so you can push the tines into the soil. The rear end flap should be riding on the top of the soil with the tines dug in, spinning and churning almost all the way up to the fender. Think kneeding dough, and you're kinda just scoring it on top with a fork. The drive function should be in its slowest pace, just strong enough to drag the tines forward into more dirt. Dig in bud!

@lucasstiles8012 2 ай бұрын

The soil should be all torn up for more than 6 inches, otherwise you aren't turning under the other plants root systems, and they'll grow back among your tomato plants.

@RiverratGoRVing 2 ай бұрын

James great save, a tip from my grandfather from many years past 2/3 gear oil 90w and 1/3 gear grease mixed with a mixer helps with stopping leaks and lubrication in small engine gear boxes. Keep posting. Tks Michael.

@johnnybgoode6466 2 ай бұрын

Hi James - I had a similar problem with the tynes and the oil leaks at the shaft- on a Masport Rota Hoe ( New Zealand brand ) My dad & I cut out thick felt washers and placed them between the seal and the tyne - we covered these felt washers in grease and they have worked well - still in use today/ The troy machine is a bit more upmarket than the rota hoe - they are both about the same age however. Anyway they both get the job done effectively.... well done - I do like the old Tecumseh engines - much smoother than B&S of the time.

@oldbonesbushcraftrodjackso474 2 ай бұрын

Awesome diagnosis Good job . Beautiful machine .

@2010stoof 2 ай бұрын

Great video sir. These are so expensive and this thing runs better than anything in my life has seen.

@ComputerTechNL 2 ай бұрын

The old ones dig like a king

@gpecci2253 Ай бұрын

Another amazing video. This was full of challenges, which you overcame. I owned a troy built tiller like this one with a Koehler engine. It was the best engine I have ever owned.

@everybodysjonathan 2 ай бұрын

I just got my hands on an old TB horse with all the paperwork. The owners manual is 200 pages.

@richfabian6534 2 ай бұрын

James, I have watched several of your videos and get so much out of them so thank you for putting these out

@stephenhaslam680 2 ай бұрын

Seasonally timed content, a well built machine, and original documentation. Another good one James.

@andrewgrace4410 2 ай бұрын

Amazing troubleshooting James 😊

@thijs3514 2 ай бұрын

Great job giving this machine a new life!

@krisw8597 2 ай бұрын

Wow! We had on just like it as a kid in the early 80s when we had a farm in PA. Awesome !

@BruceBoschek 2 ай бұрын

I have watched almost all of your videos as they really distract me from my health problems and help me relax. That tiller certainly was designed and built well. As always, I appreciate your thoroughness and care for details. Best wishes!

@fhazen01 2 ай бұрын

Another exquisite video on a very thorough repair. I enjoy your professionalism very much. Keep the videos coming.👍

@THEFALCON58 2 ай бұрын

Hi James, great job, tiller is running great. from Derrick Congdon

@ne8r 2 ай бұрын

Now I know what's involved in replacing my leaking seals on my TB pony from 1987.

@knowone6214 Ай бұрын

James Condon Mechanical and Electrical Engineer....LOL....always look forward to your videos...great job

@BWGPEI 2 ай бұрын

The amount of good luck on this project just blows my mind. Good and lucky you are.

@lifeisfuneh Ай бұрын

James, you are the small engine whisperer! Thank you for sharing! :)

@mraaron12341 Ай бұрын

Great video. Enjoyed seeing such a lovely old tiller out back to working order. Thanks James.

@stumpy2816 2 ай бұрын

Very satisfying to watch you bring that machine back up to par. Well done James. 👍👍

@gordiehattrick 2 ай бұрын

Another fantastic video Jim! I look forward to your weekly videos!!

@tonym6326 2 ай бұрын

Great video. I love it when I see videos like this showing every pain staking detail. I have been working on my Craftsman front tine tiller and watching videos on it, so KZfaq took me to this video automatically. I started watching and couldn't stop. I watched the entire hour and a half, lol.

@MrJmattr3 2 ай бұрын

Great video! Wire brushing the pulleys was superb ! Keep up the great work!

@ebony5766 2 ай бұрын

I just found n this channel about a week ago....I hand surgery and you have saved my sanity! GREAT chanbel!!

@breebw 2 ай бұрын

The situation in New Zealand is Tillers are in short supply new, and grossly expensive. Simple blades under motor ones start at $1200, a Stihl is $1600. Rear tine models with gearbox start at $2000. As interest in gardening has reemerged post Covid, the second hand market is equally crazy. People will pay $500 for extremely old models that have sat outside. If the machine is approaching anything decent like in this video, then $1000 is a start point. People are selling ones with parts missing for $200 and they get snapped up. Crazy times.

@KensSmallEngineRepair 2 ай бұрын

Always nice to have a real Garden-Way produced TroyBilt Tiller! They are bulletproof!

@wildefox1478 2 ай бұрын

That is a nice old tiller, you just can't beat older equipment, it's must built to last unlike the junk of today. Nice work fixing up this old tiller James!

@Dee-cg4hy Ай бұрын

Thank you so much for sharing.

@user-xl5np5dp8n 2 ай бұрын

I think you're ready to plant a garden now!🙂

@johncourtneidge 2 ай бұрын

This was at a level that even, were it possible, surpasses your normal level of 'beyond excellence'! Our thanks not only to you and your lighting and videographic crew, but to Stanley and the lift donor: what a fine viewing stage it makes. And oh! the original build quality and the astoundingly well produced and! maintained Owners' (plural!) literature cache. Wow!!

@petenelson8136 2 ай бұрын

I've got the exact same tiller. I replaced the motor with one from Harbor Freight, and it bolted right on. I had to remove the oil shutoff on the motor because of all the tilting I do when tilling it would cut off. It's leaking a bit around the drive wheels so watching you take those seals off and replacing them was a huge help for when I do it. Thanks for sharing.

@jimwillson681 2 ай бұрын

I love the older power equipment with adjustable carbs. And parts made of steel! I like that you show the younger people the principle of carb adjustment and fine tuning. The surging under load at the end of the video was really a great illustration of how the mixture plays together with the work being done!

@jg6142 2 ай бұрын

Nice job as always!

@loucinci3922 2 ай бұрын

Enjoyed the video. Thanks for sharing

@rancelynch2226 2 ай бұрын

Rance here, I to want to give you my thanks and appreciation for your time and efforts required to produce rhese high quality videos that afford us pleasure and a learning experience. For me your videos are perfect and again "Thank you"

@jcondon1 2 ай бұрын

Thanks Rance

@FaithSaraG Ай бұрын

Those tillers are designed to be run with one hand so you can walk to one side of the freshly tilled dirt. "No wheel marks or foot prints" was one of the tag lines in Troy-Bilt ads. When I was a kid, my dad bought a Pony (next size up from the Jr). It had a 5 hp Briggs I/C on it. I ran it a lot, much of it one handed. I wish you had pulled the depth bar all the way up. Those tillers look pretty cool running down a row with the nose pointed at the sky, tines buried in the dirt and the tine guard flat on the fresh dirt.

@bobmondelli9621 Ай бұрын

Thanks for the video…I have the same exact tiller that I bought in 1984!!

@gregclarke6419 Ай бұрын

I really enjoy your videos, James. Thank you for your effort in the engine work as well as the videos. Naturally, I was not surprised your power washer was a small engine version 😄

@gregcrabb3497 Ай бұрын

My grandpa had a troybilt when I was little in the 70's. That thing was always torn up. Never did work right.

@AllenCavedo 2 ай бұрын

Excellent project video.

@geraldharkness8830 Ай бұрын

allways interesting james you are a star!

@martyb3783 2 ай бұрын

Great video James! Luckily for me, I just acquired an almost identical tiller that needs some work. I hope mine turns out as good as yours has. Thanks for this!

@martynbuzzing3327 2 ай бұрын

I just bought myself a compression tester. What a time saver.

@jonminer9891 2 ай бұрын

Good show Mr. Dondon. I have o garden, but I would get a tiller if I had one. Thanks for sharing! Stay Healthy!

@NilsBeck-kk4nb Ай бұрын

I have an old Troy bilt tiller with an 11 hp engine, it's a beast.

@mikefussell8450 17 күн бұрын

James great video and content. I really enjoy your channel and videos.

@chipsatterly4902 2 ай бұрын

"Troy-Built" used to be a reliable sign of really GOOD quality. That seems to be reflected in this machine. I guess that small roto-tillers are much like mobile generators in that they are are used on a very limited basis. Long periods of time can be spent awaiting the next use. Certainly not much "day to day" usage. Your step by step analysis of the current issues is very thorough AND educational. I always learn more about the "machines" involved. The Black gloves are also a nice touch for the video watchers. Thank you very much!!

@haneyoakie14 2 ай бұрын

Impressive Troy-Bilt! Good job 👍

@markcollins3453 Ай бұрын

I am new to your channel, and I must say it is very helpful and enjoyable to watch. Another great video! 👍👍👍👍👍

@pinecone01 2 ай бұрын

Nice, older machine! Well, you've got yourself a nice little tilled plot, no time like the present to plant a little garden!

@Digidoc316 2 ай бұрын

Those Tech flatheads are hard to stop! Seen them run with heavy carbon, leaky head gaskets, and other problems. Heat up the axle housing(not hot enough that you destroy the seals) to make the gear oil flow easier or dilute it with brake cleaner. Sounds good & getting the job done!

@ddblairco Ай бұрын

thank you James

@johnfederkeil9211 2 ай бұрын

Great Video James!

@rstephe 2 ай бұрын

Very nice. Boy, those sure do a great job.

@user-ff2bj9wc1e 2 ай бұрын

Nice job keep it up James 💯

@erikeggenbakstad Ай бұрын

Nice job :) And all is made of steel besides the fuel tank and that is is great regarding rust at least. Thanks for the upload.

@forthwithtx5852 2 ай бұрын

I’ve got some hours behind a Pony model, for sure. Same vintage, maybe a little earlier. They were quite the machines. I’d buy a used piece of equipment from you any day.

@XPFTP 2 ай бұрын

buddy i grew up with. his dad worked at the troy shop for troy bilt. he use to bring home parts for horses and build them in basement then sell them off. also bring the 8hp motors and toss them on minibikes. omg the fun we had. we were not allowed to use the tiller tho. as they buck bad and u have to learn to it go when it does hahhaha.... when i buy one of these i check the ser to see if years he worked there it was made. offten think his hands may have touched this tiller back then when building it. memorys........... you brought back memorys for me mr c. ty