In this video I replace a magneto side crankshaft seal on a Yamaha CT-3 175 Enduro. I use a homemade slide hammer to remove. Then install the new one using RTV sealant, punch and a hammer.
Пікірлер: 41
@frankdillon6127 Жыл бұрын
im convinced you must keep Dales channel on 24/7. your the man!
@montana2strokeracer Жыл бұрын
I think the notification bell goes off first in Georgia.
@albertking7012 Жыл бұрын
For sure, great mechanic! I'm doing crank seals on my 77 Yamaha IT175. First time doing them on a dirt bike. The bike being worked on is very similar to my internals.
@Guido_Sarducci007 Жыл бұрын
Amazing shop w/ amazing memorabilia! Boss 302, John Deere, Bridgeport, Torino, degree wheel... You are living right, Bro!
@montana2strokeracer Жыл бұрын
Thanks William, yes have been into all kinds of stuff over the years. Kind of settling down with the old bikes these days. Thats what retirement is all about. Enjoying the good life. Thanks for stopping by.
@markaddy53 Жыл бұрын
great job as always dale keep it going
@montana2strokeracer Жыл бұрын
Thanks Mark, glad to have you along.
@jeffsilver4730 Жыл бұрын
Dale, thanks so much for all the great info. Especially, the part numbers for hard to find hardware. Your channel is the best of its kind on the web, thanks again for posting all the valuable info.
@montana2strokeracer Жыл бұрын
Thanks Jeff, I like to share when I know of something that will help others in the hobby, sure appreciate you hanging out in the shop with me.
@grahamsampson769 Жыл бұрын
Learned a lot watching this Dale. Another master class! Thank you!
@montana2strokeracer Жыл бұрын
It's really beating me up Graham, these things aren't supposed to be this difficult.
@grahamsampson769 Жыл бұрын
@@montana2strokeracer I haven't refurbished many bikes, but had one that fought me every inch. I can relate. Hang in there.
@jamesws3 Жыл бұрын
LOL, I was wondering about the seal and thought I'd missed it. You're in good company! The cylinder was something else. Wow.
@montana2strokeracer Жыл бұрын
Thanks, buddy nope completely forgot it. Yes, that cylinder is among the worst I have seen and still running.
@retromechanicalengineer Жыл бұрын
Another recipe for success Dale. I hope that it cleans up for the +50 piston. That poor little thing was flogged to death. Best wishes, Dean.
@montana2strokeracer Жыл бұрын
You are right Dean, flogged for sure, little dirt ingestion didn't help either. Thanks for hanging out with me,
@cainbeeping8480 Жыл бұрын
Thanks for sharing brother.
@montana2strokeracer Жыл бұрын
Your welcome Cain, any new bikes out your way?
@cainbeeping8480 Жыл бұрын
@@montana2strokeracer not yet
@stevo121286 Жыл бұрын
I have been using my #2 JIS drivers on Philips screws also. I have found that they grip the Philips screws better then a Philips screw driver does. Seems like they don't cam out as easily. I believe the JIS is a far better design.
@montana2strokeracer Жыл бұрын
Think your right Steve, I never thought to try one till the other day. It fit exceptionally well.
@frankdillon6127 Жыл бұрын
thank goodness for McMaster-Carr and Grainger.
@montana2strokeracer Жыл бұрын
Yep, good sources for hardware type items. Did you get one of those nut drivers, I bought another one, it came out of Las Vegas.
@frankdillon6127 Жыл бұрын
@@montana2strokeracer not yet, but soon. just one of those very useful tools that are available nowadays. remember in 1959 i took a Mustang scooter to a indenpendent dealer in Tucson for work all they had as pliers and a screw driver,really chewed up all my fittings was i pissed!
@arunprassath53607 ай бұрын
Hi sir, is there any way to find if the seal is broken without dismantling? Any symptoms..
@montana2strokeracer7 ай бұрын
Hi there, best way is to perform a leak down test. But generally, if you have an air leak the engine will rev on its own or the spark plug will look very lean.
@arunprassath53607 ай бұрын
@@montana2strokeracer thankyou👍
@frankdillon6127 Жыл бұрын
no O-ring on the left crank seal?
@montana2strokeracer Жыл бұрын
No sir, only on the right, that's to seal off the spacer.
@frankdillon6127 Жыл бұрын
high milage or poor oiling cause the cylinder scoreing?
@montana2strokeracer Жыл бұрын
High mileage, and dirt ingestion. I believe the oil pump is working, we will see when its assembled.
@frankdillon6127 Жыл бұрын
someday you need to show how you organize all the different parts. i for one cant find stuff and usually need to re order and of course eventually find the part. guess im just a sloppy person.
@montana2strokeracer Жыл бұрын
Nope, I too am a sloppy person. My spare parts are in a box...every time I need something I have to dump the whole box, go through everything and put it back in. At least I know it's in the box.
@frankdillon6127 Жыл бұрын
@@montana2strokeracer sounds familiar! you shop looks neat and organized, i for one just wonder how my family will feel when i passaway someday and they have to deal with the mess. maybe call the American Picker Show!
@frankdillon6127 Жыл бұрын
think we all felt you just edited out the right crank seal install, never dawned on me you screwed up! LOL
@montana2strokeracer Жыл бұрын
Yep, I screw up more than you can imagine. I couldn't believe I did that though.
@cainbeeping8480 Жыл бұрын
First
@montana2strokeracer Жыл бұрын
Holy cow, quick draw!
@frankdillon6127 Жыл бұрын
@@montana2strokeracer your quick,watch Buster Scruggs Videos on youtube if you want to see a fast draw!