Vitavon Axles on the SCX10iii
Рет қаралды 25,206
Күн бұрынThese axles are BLINGING!!! WOW!!! Links below to get yours!!
Bowhouse Tool I used bowhouserc.com/bowhouse-rc-al...
Vitavon only sells on Ebay
Panhard bar chassis mount
rover.ebay.com/rover/1/711-53...
Front axle housing
rover.ebay.com/rover/1/711-53...
Rear Axle Housing
rover.ebay.com/rover/1/711-53...
Front Shock Towers
rover.ebay.com/rover/1/711-53...
Rear Shock Towers
rover.ebay.com/rover/1/711-53...
Got things in your Amain Amazon or Ebay cart? Use these affiliate links to purchase it, every little bit helps!
Amain Hobbies bit.ly/2KmR9WZ
Amazon amzn.to/34vnhkg
Ebay rover.ebay.com/rover/1/711-53...
Get your Official high quality Exocaged merch and apparel right here on Teespring!!!
teespring.com/stores/exocaged-rc
Wow you guys scrolled to the bottom? That's Awesome!!!! If by chance you want to contribute to the channel send me an email at Exocagedrc@yahoo.com thank you
@johnc3399 4 жыл бұрын
The clicking would drive me nuts
@ConditionZero76 4 жыл бұрын
Man that looks amazing, beautiful craftsmanship in the axle!!
@henrybunker2922 4 жыл бұрын
WOW! Great looking axles.
@lstruggy 4 жыл бұрын
Performs as well as it looks! 🤩👌🏽
@clementinecrawlers2526 4 жыл бұрын
Awesome course !
@matthewreyes945 4 жыл бұрын
What a nice setup, man! Thanks for the excellent video!
@mojaverc1585 4 жыл бұрын
That looks so nice!
@markvasseur961 4 жыл бұрын
Those axles look awesome and seem to plant those tires well. Need me a second job so I can get me a set plus all the brass as well.thanks for another good video
@marcpoletti9511 4 жыл бұрын
Love your videos, great job, TY.
@NaturallyRC 4 жыл бұрын
Way cool. I'm also noticing the orange cord, for what I assume is dynamic recovery. And here I thought I invented the technique of looping it back through the chassis like that. 😁👍
@ExocagedRC 4 жыл бұрын
NaturallyRC that’s the DSM Integrated Recovery Kit. I have it on 3 trucks now.
@NaturallyRC 4 жыл бұрын
@@ExocagedRC I had it on my Barrage back in 2018. So, turns out I did invent it after all. Just someone else did too.
@cliffordgwekwe9853 3 жыл бұрын
Man that thing is sick.. Good job i love it
@vwagon5566 4 жыл бұрын
Great vid about the metal axles. I've got a set for my Cappra from Treal, not assembled yet. You're right, there beautiful and very heavy. We'll see pretty quick. Thanks again, keep it up.
@ExocagedRC 4 жыл бұрын
Yeah man. I want to keep these shiny as much as possible. Thank you for being a member of the channel. I appreciate it.
@jamesswift4641 4 жыл бұрын
Actual still look awesome the clicking sounds like playing cards inside the spokes of a bicycle wheel
@NaturallyRC 4 жыл бұрын
LOL. We used to do that with hockey cards when I was a kid. Me, I used a Bobby Orr rookie card. Yeah, that clicking has got to go. Best of luck sourcing it down.
@willgerdesrc3687 4 жыл бұрын
I did that out of lexan for my boys last weekend lol!
@stpbasss3773 3 жыл бұрын
@@NaturallyRC or run over a soda can so you sound like an annoying dirt bike lol
@strykerll562 4 жыл бұрын
Man that is awesome and looks amazing and definitely go with triple 777
@BobbyleonardII 4 жыл бұрын
Metal axles look so dope
@coolasrc 4 жыл бұрын
Wow those axles are beautiful pieces. They definitely look good under the 10.3. May have to get some someday because vanquish is soo much
@rclyfe 3 жыл бұрын
@@michaelarriola7296 I'm not sure if you know by now, but Vanquish now has both front and rear housings in clear and black for the 10.3. Front housing will need a pair of c-hubs, and the rear housing has its own cover
@NathanStorer-RC 4 жыл бұрын
Obviously Optimus is your most capable crawler, but this is becoming my favorite. Maybe it's because I've seen it the most? It really is nice seeing it come along like it has. With all the extra weight you've added, I'm starting to think it is a good thing the stock tires were as stiff as they were to handle all that weight under stress. This is really looking amazing with the brass and chrome!
@ExocagedRC 4 жыл бұрын
yeah man, I like shiny things for sure, when I order stuff sometimes I specifically ask for the shiniest options they have.
@NathanStorer-RC 4 жыл бұрын
@@ExocagedRC Hahaha, that's awesome! 😃
@douglaselliott8298 4 жыл бұрын
I agree with your taste in chassis bling. Most of the upgrades(and money) on my TRX-4 Sport has been for metallic jewelry for the portals and such. But between the cost and the aesthetics of those Vitavon housings and portals, I'd have to turn my rock-garden into a dirt trail so as to never come close to marring those beautiful axles. Even then I'd need to fashion protective skid plates for both assemblies before I dare drive it.
@ExocagedRC 4 жыл бұрын
yeah I know I'm going to scrape these up but I was trying not to in this. The wood stuff isn't an issue but those rocks are brutal!
@douglaselliott8298 4 жыл бұрын
@@ExocagedRC Yeah; $300+ of finish destroying brutality.
@edwardhernandez7600 4 жыл бұрын
I just drooped my 10iii and I ain't gunna lie it made a huge difference. That 1st obstacle you showed? Mine would be able.to climb it with a slight bump of throttle. I got the 2 stage proline foams soft outer hard center with 1.9 deepwoods amazingly well. I put all rc4wd electronics in it with a 35t motor with the dig active. I do dig those axles though!!!!! I'm jealous because your rig is amazingly gorgeous.
@fan-jo2je 4 жыл бұрын
Can't wait to see it with some better tires!!
@ExocagedRC 4 жыл бұрын
I’ve done videos with other tires.
@mathieufournierauger7978 4 жыл бұрын
Chek your gear mesh for the clic noise. Nice video you make a great job
@pauls1816 4 жыл бұрын
Become one with the click. One of us. One of us
@ExocagedRC 4 жыл бұрын
The click to click them all!!
@Chon-c 4 жыл бұрын
Lol. 👍👍👍👍. TY JOE. yeah. Those helped that truck all around. It needed that weight. Or it works well with that truck rather. Even with the tyres But damn. That extra load made that click come back like it was before you tweeked it . Lol. And again ty.
@00godlovesus 4 жыл бұрын
Nice Moves:)
@KTMcaptain 4 жыл бұрын
I’d like to see you swap out servos. I just ran the triple 7 on 3s and it kept making me crash. The steering is so much faster than I am use to and it changes direction much quicker. Glad I ended up getting it. I ran the trax-ass 330oz blue servo and it would stall easily especially after being on the rocks for a few obstacles. So I got a savox 2230sg and really questioned whether the triple 7 would make a difference. I’m running it stair to my jst lead off the esc and it’ll push obstacles around. Got it to stall once on a curb but I think that was more of its protection mode because it wasn’t warm and it’s slid the truck away from obstacles. Finally a servo that can work on the hefty trx6.
@ExocagedRC 4 жыл бұрын
Yeah I’ve got the 777 out now and am planning to get it in there.
@BrandonWhipp 4 жыл бұрын
Need to put a link to that bowhouse tool set in your description box. 😁
@ExocagedRC 4 жыл бұрын
I’ll add this one in there. Thanks for the suggestion. bowhouserc.com/bowhouse-rc-all-in-one-tool/
@McFly_FPV 4 жыл бұрын
Nice truck and upgrades but man that clicking would drives nuts. I love your videos by the way 🌞 🌞😎
@ExocagedRC 4 жыл бұрын
it does, but in person its not as bad sounding as on camera
@McFly_FPV 4 жыл бұрын
@@ExocagedRC probably man keep them coming i love wathching your channel
@mcvaluemenu 3 жыл бұрын
I havent watched your future videos but the clicking is known for a backwards gear in the gear box. Harley Designs mentions how to fix it in his overview of what to change on the scx10.3
@ExocagedRC 3 жыл бұрын
I've been into this thing way too many times and am done with messing with it.
@charliebrown238 2 жыл бұрын
Im hearing ya about the hubs hanging out on the inside ... what blows me out is ... people put a HUGE hex nut extension on ... and all you see is the portal box hanging down in the middle of no where ready to catch any rock that the portals where made to miss in the first place! LoL! The only thing the portals are good for with a huge extension like peeps have is for hanging up on stuff! Love ya trucks as always mate ... you equip them with some "To nice to scratch" CNC parts! So tell me ... does it make you cringe the first time those vitavons drag across a rock? Lol! Your better then I am ... if i could afford that stuff, mine would be a shelf queen! HaHa!
@ExocagedRC 2 жыл бұрын
Well. Yeah I do kinda cringe at first good hit, and the second and third. LoL metal housings hitting rocks is so bad. LoL
@bmxgod2013 3 жыл бұрын
Glade to see they keep sending you axles to review don’t lie lol
@bmxgod2013 3 жыл бұрын
And why a sway bar
@thufirhawat84 4 жыл бұрын
Shiny happy people laughing✨✨✨
@BobbyleonardII 4 жыл бұрын
Sc10iii’s click and not able to make it over some spots annoys me though for how much they are. I still prefer your gen8 or the trx sport runs you do on that same track.
@DickGibson 4 жыл бұрын
Super duper way way kool man
@nolaweezy6366 4 жыл бұрын
I have to stop watching these. My wife is gonna kill me if I keep spending money on my Capra lol. Good video dude per usual.
@stinkyrainbow653 4 жыл бұрын
Even Lizards think, dem axles are dope. 👍🦎
@galenlong3745 3 жыл бұрын
Love the jeep crawler, are you thinking about the new Gladiator varient and doing the same work or maybe doing those capra axles???
@BrianJr 3 жыл бұрын
Good overview! I can't help but wonder, what's with the orange bungee all around the chassis for?
@cmoney360CS 3 жыл бұрын
Pretty sure it’s how he runs his servo winch
@josbarhorst6574 4 жыл бұрын
or a shiny metal *ss... and yes, more planted. Great stuff!
@ExocagedRC 4 жыл бұрын
LOL Bender is a Legend!!!
@grooveronin15 4 жыл бұрын
I really enjoy your videos, very informative. I am in the process of building my scx 10 iii. I like how you are adding low weight while keeping light wheels. Would love to see alternatives for the spektrum micro servos. Also, have you tried the stiffer springs in the back instead of the front? Wondering how it will affect steep climbs.
@ExocagedRC 4 жыл бұрын
Some are using the reefs micro 99 servos with great success. It requires a bit of work to make them work but they are awesome
@grooveronin15 4 жыл бұрын
@@ExocagedRC Thanks for the reply. Will look into them.
@danarrow1656 4 жыл бұрын
it's clicking because of its assembled wrong
@braddahdussifyoumuss596 3 жыл бұрын
Is the stock locker the 6bolt style
@WreckinStreetsDaily 3 жыл бұрын
Hey boss! Quick question hopefully you can answer!! I got the KYX Portal axles for the scx10.3 but I still have the regular scx10 rails would that mount that you explained to us fit on the old scx10 rails? Also does the trx-4 have the same system that you are explaining to us but on the shock towers instead? Because Im just trying to put on this axle on my scx10 properly! And I have the trx4 mounts that I can just drill the extra hole onto and put them on my rails but am a bit confused on what will work well for the KYX portals that have the same design, thanks in advance!
@misterrobato8270 4 жыл бұрын
That clicking is horrible. Redcat costs half as much and is twice as quiet. Have you swapped out the motor and spur to see if that helps?
@ExocagedRC 4 жыл бұрын
I've done everything I can think of man, gears and all, the issue is the input gears at the transmission are loose on the shaft and they shift under load, basically poor tolerances.
@ma-t6949 4 жыл бұрын
Yeah triple 7
@Alexauscelle Жыл бұрын
Anything done to the gears. There seems to be no play. Is it shim out?
@traxxi2003 3 жыл бұрын
What is that orange bungee cord for on you 10.3?
@Wingman-ls4bs 3 жыл бұрын
Don’t you think the shocks springs are too soft?
@adam_-adam 3 жыл бұрын
do you know if you can use a engine sound box on this jeep? i had the scx 2 and took my sound box out of that and tried to put it in my new scx10 3 jeep and it doesnt seem to have a spot on the reciever for it to work, this sure does take away 50% of the fun, dont understand why this company wouldnt havr thought about this, its crazy.
@marcpoletti9511 4 жыл бұрын
Where can we buy the the Vitavon complete portal brass knuckles/hubs and covers ("compleat outers" )or better yet just the knuckles/hubs (I have the Vitavon weighted covers), all I find is the F9 ones, they are different. Can't find what you have anywhere.
@ExocagedRC 4 жыл бұрын
I have links in the description. The knuckles are a limited thing but will be out soon under a different name, same exact pieces though.
@marcpoletti9511 4 жыл бұрын
@@ExocagedRC I see the links, I have most of it in my cart except the knuckles, very much want to complete the whole upgrade. Why are those limited, seems like they would be just what many want, are looking for, and would sell well. Thanks for reply.
@Carteeest 4 жыл бұрын
Are you looking to part ways with the stock axle housings? I would love to buy them from you if you aren't planning on reusing them
@ryurc3033 4 жыл бұрын
That chrysler click is soooooo common in the real world, maybe its part of the design? Not really but its remarkable that jeeps usually go ticky ticky and the rc one does now too!
@Lokithefeline 4 жыл бұрын
whats something like that go for i wonder...anyone know?
@mikep.9338 4 жыл бұрын
👍🏾💯
@johnrennallc5423 4 жыл бұрын
Your link doesn't work. Do they sell that as a unit? With the portal ends
@X01xCOUNTRYx01X 4 жыл бұрын
At 16:37 what are the straps maid of ? Seatbelts?
@LiquidSSSnake 4 жыл бұрын
Fire hose it looks
@ExocagedRC 4 жыл бұрын
Yep old firehose that failed inspection.
@ViperRC 4 жыл бұрын
Wish I could afford a set but with the cost of the truck and everything to get it running im broke lol mind you this truck is still a beast
@user-ey3js3td7g 2 жыл бұрын
hello, my Panhard rod mount on the plastic axle flew off, I want to buy the same Vitavon axles, are they structurally well made? I don't want to throw money down the drain.
@jasonsmithsrrcfun9259 4 жыл бұрын
Wher did you get the axels?
@ExocagedRC 4 жыл бұрын
Ebay, links are in the description
@geoffreyanderson2285 4 жыл бұрын
How big is your yard? I have yard envy big time...
@ExocagedRC 4 жыл бұрын
lol this is on about 1 acre of it. I have about 4acres in total
@timcustomrc 4 жыл бұрын
Just listening to the scx10iii run now sounds like a mini jackhammer. After watching more and more videos about scx10iii doesn't make me not want buy one. Way too loud, no matter how good it looks
@off-roadrcaddict4572 3 жыл бұрын
That looks real sweet but at a cost $$$ 😳
@ExocagedRC 3 жыл бұрын
not cheap
@meajaveer7708 4 жыл бұрын
I sub bro..
@Wannaridebikes 4 жыл бұрын
I have 2 bodies that is poly plastic with hard plastic pieces I kinda of fan of that style but why not just put hard bodies back on the rc like the old days. I find if you use the body that hard plastic parts. They bind and bend after while they crack the body Is not so good now. Just my option
@The-Jokes-on-You 4 жыл бұрын
CNC axle housing, brass diff covers, brass portal housing, LIGHTER wallet 😂🤣
@ExocagedRC 4 жыл бұрын
Yes!! LoL
@tiduspernicano5852 4 жыл бұрын
I saw a video or something and someone fixed the clicking sound.
@ExocagedRC 4 жыл бұрын
tidus pernicano yep, I saw it, tried it, didn’t work.
@chriscoles3901 4 жыл бұрын
I have found half of a solution to the clicking believe it or you need to shim front and rear axles! It's stop 80% of the clicking
@ExocagedRC 4 жыл бұрын
Chris Coles the axles are not the clicking. Sometimes the ujoint do make some noise but that’s not it for this one.
@HL-OOI 4 жыл бұрын
They didn’t do for Element RC..🙁
@ExocagedRC 4 жыл бұрын
Vitavon? Yeah I don't think he has anything for Element
@HL-OOI 4 жыл бұрын
Exocaged RC ya contacted Aurther..
@PhilBender612 4 жыл бұрын
Coming in at over eight and a half pounds?
@ExocagedRC 4 жыл бұрын
philip bender yep
@proraptor4146 4 жыл бұрын
I cant believe they mounted the motor so high in this truck. Gonna be hard lowering cog on this thing. Forget ever dropping a 550 in it.
@ExocagedRC 4 жыл бұрын
It can fit a normal 550
@bmcneal27 4 жыл бұрын
Is this a public park I would love to come crawl there I live just a few hrs from ya
@ExocagedRC 4 жыл бұрын
That my back yard
@bmcneal27 4 жыл бұрын
Omg 😍 that's so awesome thanks for responding joe you got a fan here from panama city
@ExocagedRC 4 жыл бұрын
Brandon Mcneal cool man. That’s not too far. Not sure if it’s worth the drive but it’s here.
@bmcneal27 4 жыл бұрын
Man it would be worth it to me brotha maybe we could get together and crawl sometime in the future after this pandemic
@ExocagedRC 4 жыл бұрын
Brandon Mcneal cool we can do that
@jrduenas3678 4 жыл бұрын
Those are nice axles but too pricey for my wallet.
@ExocagedRC 4 жыл бұрын
Jr Duenas they are not cheap at all
@lstruggy 4 жыл бұрын
U could buy another Scx10 3 kit w that price but dam they look amazing!
@Roryrocco 4 жыл бұрын
Would those front knuckles work on a Capra?
@ExocagedRC 4 жыл бұрын
Yes they sure do
@Roryrocco 4 жыл бұрын
@@ExocagedRC Thank you, looked around for the Vitavon knuckles but can't find them. Trying not to buy the whole axle for now. Pretty sure the newer Supershafty knuckle will also work with the Vitavon portal weight.
@jeremyroberts4455 4 жыл бұрын
Watch other videos it doesnt click because they have the gears installed correctly
@ExocagedRC 4 жыл бұрын
Yeah yeah I’ve done all that they have done. Gears are right in this one. Still clicks
@jeremyroberts4455 4 жыл бұрын
Hmmm thats wierd
@willgerdesrc3687 4 жыл бұрын
Sounds worse now that clicking is back
@ExocagedRC 4 жыл бұрын
Yeah I know
@Wannaridebikes 4 жыл бұрын
What the clicking
@KTMcaptain 4 жыл бұрын
Shit this thing is getting close to trx6 weight territory
@jonthomas8487 4 жыл бұрын
Ha! It’ll still click 🤣🤣🤣🤣
@jeffconners4514 3 жыл бұрын
Can you say Focus?????????
@braddahdussifyoumuss596 4 жыл бұрын
Maybe leave the rear axle back to plastic 🤷🏼♂️
@ExocagedRC 4 жыл бұрын
It still has a nice bias to it. I could take the brass off the back and use the plastic caps to lighten it up a bit.
@braddahdussifyoumuss596 4 жыл бұрын
Exocaged RC that should work perfecto
@richarddriskell5171 2 жыл бұрын
Sounds like an old sewing machine
@Wannaridebikes 4 жыл бұрын
Them tires are not good for wood I see
@travisreid2009 4 жыл бұрын
Here's a video that may help you get rid of the clicking. kzfaq.info/get/bejne/atdip5qCzdmlhac.html
@ExocagedRC 4 жыл бұрын
Yeah done that, didn’t help. I have a video on it showing how sloppy the gears are on the shafts. Poor tolerances and maybe mine is worse than others I don’t know.
@rubiken06 4 жыл бұрын
777
@rcsendandblast1579 4 жыл бұрын
Are you still buying parts from China with the health scare happening. There are a lot of people who want this brand of parts but are hesitant at the moment I’m sure. Vitavon parts are super nice. That clicking sound what is that coming from. It’s bad.
@ExocagedRC 4 жыл бұрын
yeah, if you order off ebay, everything is dead in there by the time it gets to us.
@rcsendandblast1579 4 жыл бұрын
Exocaged RC Thanks bro. Means a lot you answered.
@ka4172 3 жыл бұрын
You cant clear "this" obstacle and you cant clear" this" obstacle again.Does it worth? i dont think so.The SCX lll cant make us happy and we sell it to buy a set of TRX4 Axles to build a nother truggy.
@jeremyroberts4455 4 жыл бұрын
That clicking means u have ur tranny gears installed wrong
@ExocagedRC 4 жыл бұрын
Nope
@jasonsmithsrrcfun9259 4 жыл бұрын
Please help me I have a brand new scx11 never been opend I'm afraid I cant build it I would love to trade for trx4 kit I dont want to mess it up please trade me so I dont mess up a 400$rig please I'll payshipu g
@jeremyroberts4455 4 жыл бұрын
Just jump in there and do it dnt be skeerd nuthin to it but to do it
RCDriver_Online
Рет қаралды 13 М.
Moral Facts
Рет қаралды 27 МЛН
Андрюша рассказывает
Рет қаралды 6 МЛН