Рет қаралды 125,026
Diode lasers have come a long way in the last few years, but can they compare with a Co2 laser? In this video I take a look at the xTool D1 Pro 40 watt module and compare it against 40w Co2 lasers.
My old 40 watt Co2 Muse from Full Spectrum Laser is mostly what I use to compare against my 40w diode module from xTool. I have used many brands of both Co2 and diode lasers, and while I reference this 40w module from xTool I speak in general terms to compare the two categories. Most diode lasers with equal optical output perform the same in the category, which is the same for Co2 lasers. It wasn't until recently a 40w diode laser was even on the market because this category has come so far.
What type of materials can you cut and engrave with a diode laser vs a Co2 laser? What are the spot sizes or beam sizes of diodes or Co2 lasers? Is a Co2 laser faster than a diode laser? These are only a few of the questions I answer in this video. I hope this will help people looking to start laser engraving compare the different types of machines.
Thanks to MakeBlock for sending this 40w module to me to test.
UPDATE:
Upgrade your laser for safety and savings! Trade in any open diode machine for an enclosed xTool and get up to $500 off: bit.ly/3vHLipP
Affiliate Links. If you use any of these links it doesn't cost you any more, and they give me a small commission as thanks.
Get the xTool D1 Pro here:
U.S. - 40w bundle: shorturl.at/dzDSZ (xTool Discount Code: VW10)
U.S. - 20w bundle: shorturl.at/tJNV8 (xTool Discount Code: VW10)
U.K.: shorturl.at/jmnqD (xTool Discount Code: VW10)
Small Business Ideas with xTool D1 Pro: shorturl.at/dqCDZ
__________________
OMTech Lasers (Discount Code "VOELTNER5"): omtechlaser.com?sca_ref=3052260.jSLSP0ZUVT
__________________
Buy materials for your laser (MakerStock): shorturl.at/fhiHI
- Use MakerStock discount code "VOELTNER10" for 10% off
__________________
Amazon Store Front: www.amazon.com...
Recommended videos:
Water Chillers: • Co2 laser chillers are...
Projects to make and sell fast with xTool: • EASY projects to engra...
My equipment setup:
xTool D1 Pro 20w
RA2 Pro rotary
Air Assist
Check out my channel to see the other machines I use
#xtool #laserengraver #laserengraving