No video
Voge 900 DSX Handle bar modification
Рет қаралды 4,952
3 ай бұрынHi guys, Finally got around to fitting bar raisers up and backwards to the Voge. It makes a huge difference on the stance of the bike i advise rolling the bars forward and adusting the mirrors, brake and clutch lever after fitting. the parts are from Aliexpress link below. parts for BMW f850GS. i re jigged the bars after a test ride hence the addition at the end. Ride safe guys.
Just found this amazing item on AliExpress. Check it out!
17,97€ | Handlebar Riser Clamp Back Move Mount For BMW F900R F900XR F900 R XR Motorcycle Accessories F850GS F 850 GS Adventure ADV
a.aliexpress.c...
@quickjan 3 ай бұрын
Hi Paul, thanks a lot for your video, I follow them as they come, so keep them coming :). My DSX will come in September maybe, but I already ordered parts as you recommended - risers and engine covers 🙃
@MrPriba91 2 ай бұрын
Hey, just wanna share with you how lucky I was when I ordered my dsx. In dealership they told me that first available bike will be at the end of the year, and while I was there someone canceled his order, so I took it. That was last week and I'm expecting my bike tomorrow XD
@motechRevolution 3 ай бұрын
It rides and handles superbly. I think the points I mentioned in an earlier video will iron themselves out with a map update and running in. Thanks for commenting ✌🏻
@christopherlynch235 3 ай бұрын
Great video,thanks for the updates on your experience with this new model.Superbly informative and insightful. Great bike at an excellent price point.Unreal.
@ivanrushtonthelonewolfrides 3 ай бұрын
Great Video mate im thinking of putting some on my CF Moto MT800 Explore as you just need to crouch when standing
@motechRevolution 3 ай бұрын
Had the same experience on the Voge, I was hunched over standing.
@Pacollons86 3 ай бұрын
Hola Paul, son de fiar los tornillos qué traen las alzas o mejor sustituirlos? Y a que par de apriete los montaste? Gracias
@motechRevolution 3 ай бұрын
Son de buena calidad, utiliza los que vienen con las bandas ya que no agarran el manillar. Utilice los pernos originales en las secciones superiores del manillar original. apriete a un par de 10 nm
@Pacollons86 3 ай бұрын
@@motechRevolution Muchas gracias por contestar y por los videos Paul. A disfrutar de nuestra Voge 900DSX
@Pacollons86 3 ай бұрын
Paul, hemos revisado el manual y dice que el apriete del manillar va a 24 N , por si quieres repasarlo. Me enviaron en el grupo de Telegram. Saludos
@alenfora1400 3 ай бұрын
So are you happy with your bike and much kilometers so far
@manosde 3 ай бұрын
Running hot with that compression ratio is normal I guess
@motechRevolution 3 ай бұрын
Yes, most definitely the reason. ✌🏻
@jmvicentemendes 3 ай бұрын
Is 30mm the maximum for the cables to have a good clearance /slack or, can we buy for example a riser with 55mm?
@motechRevolution 3 ай бұрын
I'm not 100% certain but if you unclip the cables further down maybe, it might involve removing the tank though.
@TAZZZBOY 3 ай бұрын
You are riding it on the softest set-up on front? It is too Soft for me, I have hardened it on 2 lines
@motechRevolution 3 ай бұрын
Yes I've softened mine up purely for our local roads they are brutal. Main highways and A roads are good, not a route I would have gone down on my super sports bikes of the past. But needs must especially with the wife on the back 😁
@filipedl251 3 ай бұрын
Hello I have just a question, what do you think about the material quality of these risers. Thank you so much Filipe from France
@motechRevolution 3 ай бұрын
They seem good quality Aluminium not sure what grade, but the threads were good and didn't feel soft like some I had in the past, no bad feeling when torquing up. Although they are under €20 on AliExpress they don't look cheap and also look very clean on the bike. I would recommend them
@filipedl251 3 ай бұрын
@@motechRevolution ok thank you for your response
@Carlosguca539 3 ай бұрын
Many thanks and congrats for your video. I got mine 2 weeks ago, and was thinking about fitting the handlebars raiser. After watching your video, I am now less afraid to do it on my own. I did not get what you mentioned about the headstock and which cable to cut. If you wish to have a ride around Alicante please let me know.
@jerzykorol6785 2 ай бұрын
Hi, how tall are You? 👍👍👍👍👍👍
@motechRevolution 2 ай бұрын
Hi I’m 5’10” or 178cm
@bobanppvc 2 ай бұрын
To small for me im 197...Even if i get seat and bars higher tft is too low...
@motechRevolution 2 ай бұрын
The seat has a very low dip, word is Voge are bringing out much higher seat options.
@bobanppvc 2 ай бұрын
@@motechRevolution even with higher seat tft stays low and you need taller handlebars...
@motechRevolution 2 ай бұрын
I've put lifters on mine but if you wanted more aggressive handle bars you could always put some Renthal bars on it. Although last time I took mine on a trail standing up it was fine.
#ЧУДОТЕХНИКИ с Георгием Беловым
Рет қаралды 23 М.