A quick overview of inexpensive voice amps for costuming. Commonly used for helmet wearing costumers and cosplayers for Star Wars characters etc. Amplifiers used: Aker 1506 10watt, Aker 1505 12 watt, Arsillee amp.
Пікірлер: 490
@veizour3 жыл бұрын
"I can bring you in cold, or I can bring you in chili"
@mcreedz9193 жыл бұрын
I can bring you in warm or i can bring you in cold.
@2551987ezio3 жыл бұрын
Oh yes. I definitely want my remains to be brought in, in chili. I'm sure I'll be quite appetizering to some alien form. 😂
@SocraticMayhem3 жыл бұрын
“I can bring you in warm, or- or lukewarm.”
@isaacholland65873 жыл бұрын
You can run but you'll die tired....
@Comicalamityclub2 жыл бұрын
Good enough move along.
@daddehhmando53694 жыл бұрын
This is the way
@attackonponyproductions49274 жыл бұрын
This is the way.
@joeortiz74994 жыл бұрын
This is the way
@dracopia_4 жыл бұрын
This is the way
@bneck38014 жыл бұрын
This is the way.
@leatherjacketanti-hero49464 жыл бұрын
This is the way
@IcedUp3 жыл бұрын
5:57 "I'm the manalorry"
@lightzterr3 жыл бұрын
This is not the way
@diabloflare83043 жыл бұрын
This is not the way
@trispearhalloween36333 жыл бұрын
This is not the way
@interviolet66753 жыл бұрын
I could totally see a 'what if' scenario where it's some schlubby dude in a cheap outfit and is clumsy as Fuck. oh and the relationship between him and his baby yoda being awkward and different lol. and the plot is lost entirely
@icedoutcoffee3 жыл бұрын
This is not the way
@kodyshaw69914 жыл бұрын
I'm working on a build that will have the mic and speakers all inside the helmet. Fingers crossed mic feedback won't be a problem.
@TheEnderGuyGamer4 жыл бұрын
Hey man is it possible for you to like record the process as tutorial I wanna make a full mando suit
@kodyshaw69913 жыл бұрын
@ Throat mic is a good idea. I've never messed with one before. Worth a shot.
@craft_z3 жыл бұрын
@@kodyshaw6991 it's a month
@pandapropsncostumes3 жыл бұрын
The issue with having the mic and speakers in close proximity is the risk of feedback is very high. You also have the issue of fitting a speaker big enough for sound yet small enough to not take up much room. A few people have done it with small speakers such as those used in lightsabers, but the volume and depth of the sound is no where near where one of these amps placed in the chest or on a belt are. It can be done, people have done it. But its not going to be as loud as an all in one wired solution. Hope that helps!
@j.lerner57663 жыл бұрын
@@guitarman_3693 its the other way around
@steph12152 жыл бұрын
That was by FAR the best, the simplest, and easy to understand and follow along demonstration video I've ever seen. It helped me a lot with my mandalorian suit. Thank you!
@pandapropsncostumes2 жыл бұрын
You're welcome, glad it helped!
@jeffburnham66113 жыл бұрын
TK421 has some serious feedback from his transmitter lol.
@jollygoodshow3 жыл бұрын
He should go down to maintenance level and get it checked out
@TheTwit19953 жыл бұрын
You sir are not annoying, it must be said. You are informative helpful and explain everything clearly and concisely great video and super useful!!!
@pandapropsncostumes3 жыл бұрын
Thanks, that’s all this video was meant to be. Not to impersonate or show off acting, it was meant to show what and how voice amps are used. That’s all my channel is about. Was this video linked somewhere? I have no idea where all these harsh comments are coming from!
@TheTwit19953 жыл бұрын
@@pandapropsncostumes no idea my friend, they mustn't have known what the video was for. Probably where looking for mandolorian stuff who knows. Keep up the good work regardless and don't pay to much attention the comments. Some are helpful but most are just spam or misinformed 😊
@GoldenGateNum94 жыл бұрын
Its amazing how effective it gets once you put the helmet on which is like an amplifier itself, completely transforms your voice and makes you sound like a machine, wish you went more into the voice effects.
@ejxjfjdjzjjsjryf27843 жыл бұрын
3:28 I love the titanic flute fail remix
@garagemonkeysan4 жыл бұрын
Great video. Kinda like the lower wattage amp. Sound is overdriven and noisy which adds texture. : ) Mahalo for sharing!
@pandapropsncostumes4 жыл бұрын
You're welcome! Yes, absolutely. You lose a bit of bigger sound compared to the 1505 12watt, but the 1506 is 10watt, lower profile and there's a bit of crackle and tinny / static ness to it that gives it that "trooper" sound, like you hear int he movies or via short wave / 2 way radios etc. The lower profile allows you to stick it under chest armor etc more easily as well.
@brandonhosman46973 жыл бұрын
“I can bring you in warm, or I can bring you in luke warm”
@GryphonWyng3 жыл бұрын
"OOOO, GAZABINGABOOGAAAAAA"
@brandonhosman46973 жыл бұрын
GryphonWyng You understood what I was talking about 🤣
@DJZOMBIE_23233 жыл бұрын
"These aren't the Droids you're looking for."
@helmutsommer43144 жыл бұрын
I have the TRamp, the Trooper Amp. It has the static burst. You can switch it off or on depending on your character. It also has the Vader breathe in a loop if you are Vader. Great Vid by the way.
@skttrbrain Жыл бұрын
super useful thank you !!! im a tv head and my first time out at a convention i found people couldnt really hear me but this is a useful solution!
@FuzzyPyrate4 жыл бұрын
THANK YOU for this video! This was SUPER helpful. I'm almost done putting together a Mando cosplay, and finding a good enough amp without breaking the bank was on my list. The 1506 sounds perfect! especially with the slight distortion. It adds character.
@pandapropsncostumes4 жыл бұрын
FuzzyPyrate This is the way :)
@FuzzyPyrate4 жыл бұрын
I have spoken
@Interstellar-ss2fx3 жыл бұрын
This is the coolest star wars video I've seen since 2016. I really hope this could make an idea for normal costume designers in the future. Just think about all the parents children talking in mandalorian costumes!
@HolyApplebutter9 ай бұрын
May the Omnissiah bless you for this video. Will go well for my tech priest cosplay.
@Thedifficultytweak4 жыл бұрын
i didnt know it would be this easy, so thank you
@pandapropsncostumes4 жыл бұрын
viral coyote You’re welcome!
@palehorse720 Жыл бұрын
"I think most likely these aren't the droids you're probably looking for."
@Moocen3 жыл бұрын
3:25 is this song on spotify?
@crustypaladin3 жыл бұрын
Lmfao
@christinakottmeyer37683 жыл бұрын
For a second there it kind of sounded like the Harry Potter theme song XD
@rodrigoduran57763 жыл бұрын
Idk but it sounds like a mood booster for me
@MasonForge3 жыл бұрын
Lmao
@chiquitabanandy4 жыл бұрын
Great vid! Very informative and thanks for showing how it would all work!
@ph34rbucket917 ай бұрын
Thank you for posting this, I've been trying to find something for my Mandalorian cosplay for a while
@morebacon17804 жыл бұрын
Useful video, thanks.👍 I just got a 10w amp.
@Spintechfilms3 жыл бұрын
A wireless Bluetooth adaptor would be great for helmet builds
@kitchenswitch3626 Жыл бұрын
Working on my Book of Boba Fett armor and this will be PERFECT! THANK YOU!
@shotarohidari74173 жыл бұрын
Speaking from experience as TK/TI 11435 (retired), i used to use the 10amp model aker with an icomm unit for the static bust. Now i mostly use it in conjunction with a wireless mic i have tucket in my x-wing bucket and a sound glove connected to the aux port to give me some on demand special effecfs like the wilhelm scream, the star wars theme, etc. since im working on a jawa i’ll be using that set up eithout the mic
@pandapropsncostumes3 жыл бұрын
Greetings from TK-2886 :) I will often use the Aker amp input line in for MP3 triggers as well. My T-21 blaster, Speeder bike and upcoming Camtono all use the Aker 1506 repurposed as a sound effects amp
@shotarohidari74173 жыл бұрын
@@pandapropsncostumes sweet. I also use a repurposed 1506 for my mse droid’s speaker because i hate soldering lol.
@IrradiatedMushroom Жыл бұрын
Very Helpful! Looking forward to halloween at work gonna get one of these for my Mando Costume! Haven't logged into my 501 account in several years and I'm gonna get help from a friend! There's HOPE yet.
@joking_oregon18 ай бұрын
this is a really useful video I might use this for my power armor or desert ranger cosplays I have coming up
@dericprieskorn3 жыл бұрын
Thanks for this video, for sure will be purchasing one for my Power Ranger cosplays
@pandapropsncostumes3 жыл бұрын
You're welcome :)
@JustinTK4163 жыл бұрын
Awesome! With like the one con I was planning on going to this year having been cancelled, I wanna make a really cool cyberpunk bounty hunter/mercenary costume for next year. It doesn't have a helmet per se, but I might see about throwing one of these on under the lower skull mask. Maybe even get something to repitch it so that I can have a spooky 6 foot deep voice.
@macxolix2 жыл бұрын
Working on a halo mjolnir suit, this helps a lot, now I know what it is I need to get
@pandapropsncostumes2 жыл бұрын
Awesome! Good luck!
@drfunk19863 жыл бұрын
I can bring you in cold, NO! ummm wait a second. This is the way. No wait, this....is the way. Wait a second, this, this! now this! THIS! is the way.
@nicholaswilliams73 жыл бұрын
Bought the 10 watt based on your review, I think it's a bit closer to how Mando sounds.
@karlie72 жыл бұрын
I love your explanations! And this video is very CUTE! lolll
@kianustarr Жыл бұрын
Great review, just what I needed.
@Hypernautz4 жыл бұрын
Thank! you! I needed this information!
@Micksoffthings3 жыл бұрын
I leave this under every video I watched, it helps the algorithm..
@KickapooNinja2 жыл бұрын
Nice! I'm trying to get my Mandalorian costume ready for Halloween. I'm also trying to make a small set of Mando armor for my daughter lol I've been curious about the voice Amp for my costume
@MannyMishap3 жыл бұрын
3:25 just gets funnier and funnier the more you watch it
@amandajones884110 ай бұрын
I was trying to work out how to engineer a system like this, and now all I have to do is work out where on the costume the speaker goes?? And for a bonus, the cheaper the setup I buy, the more Star Wars Helmet Voice I get! This is an excellent video, worth using the Like button that I never touch.
@pandapropsncostumes10 ай бұрын
Glad it helped! Yes, totally. It's a simple as a $30 purchase on Amazon that can solve your problems. Most amps have a neck strap that you can wrap around your neck and have the amp facing forward on your chest and most of the smaller amps are only about an inch thick so they don't take up that much room
@pandapropsncostumes10 ай бұрын
Correct. The 10 amp models aren't quite as loud, but they have that sort of hollow. Tinny CB radio kind of sound that we think a lot of troopers and character sound like, so sometimes that's actually a better model to go with. Depending on how thick your costume is, or maybe how many layers of soft parts are on top of the speaker and amplifier that can muffle some of the sound. In those cases the 12 watt amp is a better choice but it depends on your costume
@teroblepuns3 жыл бұрын
3:06 voice example
@heypepito55224 жыл бұрын
Thank you, great vid.
@midzik482 жыл бұрын
I could totally imagine Jango Fett stealing Robocop's line. Jango finds his bounty and says "Dead or alive, you're coming with me."
@javelin4641 Жыл бұрын
so cool, thanks for the video!
@TheStillRunners Жыл бұрын
Great video. Thanks!
@AngelOnMyShoulderProductions3 жыл бұрын
Hi sir! First off, thank you so much for demonstrating the amplifiers! I was thinking about cosplaying as Second Sister from Jedi Fallen Order and I feel that her voice is deepened a tad and has this crispy electronic sound more like Kylo Ren's voice rather than staticky like the Storm Trooper variant. I feel that the effect could best be heard when she was about to fight Cal and said "Outstanding". I'd link the clip, but I feel that KZfaq would hold my comment for review. (Aka banish it to the shadowzone.) I've had a look at the Mandalorian Mercs forum where they too discussed how the Aker brand seems to be the amp of choice. My worry is that the ones I've observed do not seem to have the droi- I mean, effects I'm looking for. I was wondering which amplifier you would recommend?
@dcpinapels3 жыл бұрын
"TK421 Why aren't you at your post" I understood that reference!
@ibdnzgr3 жыл бұрын
Heck, I need one for when I wear my face respirator!
@segov2860 Жыл бұрын
Ill give this a go thanks. I need to buy it then rip it apart and repackage for my Darth Malak build.
@pandapropsncostumes Жыл бұрын
Ive done that with several amps, where I separate the circuit board, the battery and the speaker to get a lower profile layout. You can extend the wires for the battery or speaker if you need to relocate parts. You may need to fabricate a speaker housing so that you can get some resonance out of it. Good luck!
@savageart44393 жыл бұрын
Yes, my cosplay will be great
@SkimoStories Жыл бұрын
this guy seems so friendly
@luketimewalker3 жыл бұрын
Very cool! Thanks!
@UrbanTiger743 жыл бұрын
I may have to get this when I get my Galac Tac armor. LOL!!!
@jayv9779 Жыл бұрын
If you can find one with EQ you can really nail the effect.
@IceCreamGuerrilla Жыл бұрын
Haha great video man. Hope your dog is ok
@maddogtannen693 жыл бұрын
great job bro
@nanamicoscos33404 жыл бұрын
do you have any tutorial how to add effects on the voice amps please. and this video is very help me a lot THANKYOU!
@pandapropsncostumes3 жыл бұрын
Sorry for the very late reply. I would look into voice effects cards from Hyperdyne Labs, RomFX. These are great standalone units but they can be expensive and you normally choose one specific effect / voice and purchase that one to use. You can't use it for multiple voices, you would need to purchase different chips etc. The Rom FX has some models that let you tune the pitch etc. There are even phone apps like Voice Synth Pro. That app is very versatile in that you can use preset effects or customize them as you like. The only issue is that wiring your phone to the amp may require some hacks (eg: Current model iphones don't use standard headphone jacks, so you need different adapters etc.)
@Birdman951 Жыл бұрын
thank you for the video
@k7l3rworkman972 жыл бұрын
I need one of these
@simbioscope3076 Жыл бұрын
Hi this was great!, just guessing to ask if you can provide us an example of how to use/add effects for example I would like to add two different pitch effects ( -15 and +15) to the voice amplifier in real time, many thanks in advance
@panagiotisnikolopoulos60883 жыл бұрын
this dude just flexing us the limited edition helmets he has
@mosesl88483 жыл бұрын
This was helpful
@IowaMan2 жыл бұрын
cool i was wondering about these now my helmet is fin
@LaVaquitaa3 жыл бұрын
I have a question I’m currently dressing up as sponge I and I’m trying to find one of those mic so I can sound like the character , do you know which I should get?
@pandapropsncostumes3 жыл бұрын
Aker 1505 amp is the loudest but it’s bigger than the 1506
@DOOMPREDATORMAUS Жыл бұрын
Thanks, this is a lot helpful for the other helmets I have planned in the future for, but, how t Fo you change the voice on it? Also, if its on the belt....how does it sound like its coming from the helmets vocabulator then? I have so many questions now
@DanielRojoLibros4 жыл бұрын
It is posible too use this to change my voice like a robot?
@protomechanics2 жыл бұрын
could you leave links to where you bought it? also how do you lower the pitch with the chips you mentioned.
@DanielRojoLibros4 жыл бұрын
Where I can find that voice modificator?
@hugthisgoat36292 жыл бұрын
I'm working on a cosplay that'll have a soundboard (as opposed to a microphone) for input and the Aker 10W was recommended to me. I'm a little uncertain as to which would have the clearest quality (and would love your feedback (pun not intended..) on that), but this video alone has put me at ease - so thank you so much!! (❁´◡`❁)
@pandapropsncostumes2 жыл бұрын
The Aker 1505 12W is going to sound fuller due to a bigger and more powerful amp and speaker. It has a 1/8" audio input jack on the side for soundboard inputs. I've done the same on thing on a few builds and it works great. Good luck!
@hugthisgoat36292 жыл бұрын
@@pandapropsncostumes Thank you so much for replying!! :D That's awesome to know. It seems like the australia tax hits this one pretty hard unfortunately, but I think it'll be my best bet u_u/
@kerricaine4 жыл бұрын
i've been doing star wars characters for a couple years now, and one issue i've always had is actually hearing in my helmet. is there anything that works kinda the opposite of this? where you have a speaker on the outside of the helmet, maybe hooked up to headphones inside? and could that be used simultaneously with an amp like this without causing massive feedback?
@pandapropsncostumes4 жыл бұрын
kamenkewl Yes, you can install a small pickup microphone outside that goes to earphones. That would help
@LCFG22 жыл бұрын
I was thinking of doing a Kylo this is way better than that silly mask with the voice changer everyone is trying to upcharge $100+. Thanks!
@zax82432 жыл бұрын
Nice
@SandraOrtmann19763 жыл бұрын
That is all nice and dandy, as long as you have pockets where you can store such items...I might just end up having to figure something out with a jetpack.
@pandapropsncostumes3 жыл бұрын
If you’re doing the Mandalorian costume, a Aker 1506 fits inside the belt pouch :)
@SandraOrtmann19763 жыл бұрын
@@pandapropsncostumes Not the Mandalorian, but the re-appearance Boba Fett with lots of ammo...but not a single belt pouch or otherwise a pouch.
@SandraOrtmann1976 Жыл бұрын
@@pandapropsncostumes I am by now done with the costume and just got approved (Mandalorian Mercs). As there is no belt pouch (weathered version), I cannot store anything in belt pouches really. I made a small, sneaky pouch to go under the leg scarfs. Maybe I can sneak the Aker in there, besides my glasses and asthma spray (I may just leave the glasses, but I will not go without my emergency medicine).
@ernievc3 жыл бұрын
Great vid! Where did you get your Mando helmet? Please reply! Thank you!
@DataCentre0074 жыл бұрын
I order my TRamp for my Stormtrooper costume.
@Southpaw25ive4 жыл бұрын
Hello , are them Helmets from PVC? Im just curious when can i find these, they look so realistic.
@pandapropsncostumes4 жыл бұрын
Λογοθέτης the Stormtrooper helmet is a vacuumformed kit, just like the originals. The Mandalorian helmet is a 3D printed model I printed and painted
@starprince72543 жыл бұрын
Alternative title:Asian Jango Fett shows how to make a voice modifier
@Yuk4ri.3 жыл бұрын
3:27 Harry Potter Theme
@alexmaurice42743 жыл бұрын
Deadd😂😂
@nekotj_2 жыл бұрын
It's there a way to get your voice to sound higher pitched? Im planning on doing a specific cosplay for that.
@pandapropsncostumes2 жыл бұрын
Look into a voice effects sound card. These are connected between the mic and the amp and can change your pitch. Hyperdyne labs etc. You can also use an older iphone with the headphone / mic jack and use the Voice Synth pro app on itunes
@ivinmckinney51914 жыл бұрын
What would be a good unit for vader pitch?
@baileymaule25823 жыл бұрын
3:27 7 year old me learning to play the recorder
@sevimlialkolik3 жыл бұрын
Your mandalorian helmet is AWSOME. Can i get one ?
@Latenivenatrix_Mcmasterae2 жыл бұрын
He turned into an elk for a second
@JeremyVega1133 жыл бұрын
You talked a little bit about putting a voice effect add on to the voice amp, I would like to learn more about that. For instance for Darth Vader, since he does have a deeper voice how would I do the add on for him?? I really don’t know how that part works
@pandapropsncostumes3 жыл бұрын
Yes, you can add a voice effect box. Look up Hyperdyne Labs, RomFX or Voice Synth Pro.
@ungoosed22323 жыл бұрын
I want to know where i can get one of those mando helmets
@jollygoodshow3 жыл бұрын
Hasbro The Black Series - Mandalorian Electronic Helmet
@Blast_52403 жыл бұрын
Etsy
@katrina_SJD2 жыл бұрын
Where can you find the voice changer cards I can't seem to find what I think you mean. I'm looking for something deeper and maybe slightly robotic for Red Hood
@BiddleYT4 жыл бұрын
im thinking of starting cosplay by making my own character called Nitro, wish me luck. His voice needs to be very robotic like
@pedrop41743 жыл бұрын
Does he make your file size capacity from 8 mb to 100 mb?
@snappy49382 жыл бұрын
@@pedrop4174 lol
@Wurstuwe4 жыл бұрын
Where did you get the printfile for the Mando helmet? Is it printed in one piece or multiple? Still looking for an original-looking one. Thanks for your help.
@pandapropsncostumes4 жыл бұрын
Roman Maisel It’s a Rob Pauza V2 from myminifactory. It’s printed in multiple parts and glued together
@RandomStuffGarage6193 жыл бұрын
Galacticarmory.net has some files too.
@St3v1eZ3 жыл бұрын
Where ever I go he goes
@BrandonGebbia3 жыл бұрын
Where did you get the Mandalorian helmet? I like it!
@sistin1e2 жыл бұрын
❤️
@QueenGreyClouds4 жыл бұрын
For mandalore
@technewsfortechnoobs3 жыл бұрын
I'm wondering if these systems are compatible with those omnidirectional mics that are very slim and low profile. That would definitely cut back, if not totally eliminate the feedback I would assume. I am also wondering how to put the speaker itself in the helmet so it projects from where one would expect the sound to actually come from. I may even try to make a custom helmet to hold everything in a more space-saving manner while beeing completely original in my character design.
@pandapropsncostumes3 жыл бұрын
many people have tried the all in the helmet approach. The issue is using speakers that are small enough and give a good full volume. Its loud enough to hear in your living room but at an event or convention, it's not loud enough. Depending on the helmet design, there might not be enough room to contain larger speakers. The other issue is the proximity of the mic and the speakers which can cause massive feedback.
@technewsfortechnoobs3 жыл бұрын
@@pandapropsncostumes I wonder if going with pro-audio speakers that could be wired up differently would work. Like get some good Polk Audio, JBL, or other speakers that would work size-wise, put out good volume, and not have feedback.
@Keepvogel552 жыл бұрын
Do you have these with effects as well like pitch shifter?
@killeveryvenue2 жыл бұрын
Do you have any suggestions on how i could go about finding a way to make my voice sound like Venom from spider-man?
@pandapropsncostumes2 жыл бұрын
Try the Voice Synth pro app on itunes
@DoronBond3 жыл бұрын
Where did you get the Mando helmet from?...and the amps?