Volkswagen Touran 1T front seat removal

Рет қаралды 25,389

4 жыл бұрын

A basic guide to removing the front seats of a VW Touran 1T. Tools required are your choice of driver, an M12 spline socket, a T20 torx socket and blade/scissors. Total time to remove both front seats would be approximately 15 minutes. Difficulty level is 2/5.

Пікірлер: 24

@Sounddoctorofficial 3 жыл бұрын

Thank you mate very useful video, getting front seats from a Touran into a caddy😃

@troubledtinkerer 3 жыл бұрын

That's an awesome mod. Good luck with that.

@MrMajjido Ай бұрын

That sounds like a south african accent...very cool

@WHIZZER86 3 жыл бұрын

Great tutorial 👍🏼

@hiddenhabd9501 Жыл бұрын

Thank you very much

@allahdittababu4802 3 жыл бұрын

Good video well explained

@EnriqueGuerreroO 3 ай бұрын

Did you disconnect the battery in order to not activate the airbags?

@ioanionesi127 3 жыл бұрын

Thank you !

@alexsmith9972 3 жыл бұрын

Hi mate, when fitting the seats back in, how tight should I fasten the bolts? Should I set my torque wrench to 30 Newton-metres?

@tedarin 3 жыл бұрын

Awesome video! Do you know if it's the same connectors on 1t3 (2011-2015) seats as on 1t2?

@troubledtinkerer 3 жыл бұрын

Unfortunately I don't know. Those are still quite rare in New Zealand. The platform is so similar that I'd suspect that most of the seat systems are the same or very similar.

@locsei105 2 жыл бұрын

Thanks for the video. It is very helpfull. Is it possible to drive a touran without passenger seat in the front row and not having airbag failure or any warning message? I have to carry a quite long item and it only fits in the car if I remove the passenger seat in the front.

@troubledtinkerer 2 жыл бұрын

Unfortunately, unplugging the seat harness will cause the airbag light to pop up on your instrument cluster, and that will require a special tool to clear, once the seat is replaced. I am unable to confirm whether or not there is a risk of the airbag deploying in this scenario, although it seems unlikely.

@locsei105 2 жыл бұрын

@@troubledtinkerer Thank you for your quick response! :)

@Nisotovski Жыл бұрын

Are tose torx bits? The bigger one on the car look different with mor teath? The one you call m10 is it soecial bolt?

@troubledtinkerer Жыл бұрын

It's not torx. It's a spline /triple square

@zedlyfe 3 жыл бұрын

After removing the shotgun seat, could it be reconnected facing the rear?

@troubledtinkerer 3 жыл бұрын

It's possible, with some modification. Safety would not comply though, because the seatbelt could not work as intended, and the airbag would be hazardous.

@zedlyfe 3 жыл бұрын

@@troubledtinkerer the goal wouldn't be to have someone sit in it while driving. What kind of modifications would be required? I don't need the airbags to be working for the passenger seat (as long as its not dangerous for the driver/me)