On my 2013 Volvo S60, I was able to directly pull out the old incandescent bulbs and install a new LED bulb with no modifications. A plastic trim removal tool helped with prying off the dome light assembly. I used a Sylvania 2825 LED which worked great, but any LED T10 bulb should work. It didn't work the first time, but after pulling out the bulb and putting it in the other way, it worked flawlessly. Thanks for the useful video!

Many thanks for this great video providing guidance to perform this on four bulbs in the overhead and two more for the back seat of my 2009 S80. Took me about 90 minutes. Now that it's complete I would have ONLY replaced stock bulbs for the map lights and NOT for the overhead courtesy lights since now the interior is lit up like a Broadway stage when coming or going. But it's not terrible so not worth the effort to change back.

I tackled this today. All overhead light and as well as the trunk and under the dash. Need one more light for the glove box and figure out how to change vanity lights. This took about 2 hours as was a pain in the neck...and fingers. Thanks for the video!

They weld the bulb legs to the adapters. I ended up getting some T10 holders from amazon/ebay and the philips t10/501 bulbs to replace the ones I had in the dome light. In some instances the light is way too bright so might look into some dimmer options for at least two of them (the map lights I don't mind the brightness) - Looking to do the footwell lights next because the standard light is poor

Hi Guys, I drive the year 2016 S80 T5 Drive-E. I have just upgraded all my cabin LEDs. The T10 socket in my S80 can be detached easily without prying the wiring. I guess for newer Volvo models, Volvo has replaced the T10 socket with the detachable type. Just sharing an update experience here.

Wow thanks! I have been struggling to replace my globes without removing the T10 adapter. Now I see what I was doing wrong

Nice video, got from aliexpres led set with volvo adapter, perfect fit!

Good tip is to use a paperclip through the middle hole to push the light out. Just do circular motions and go ham with it

Thanks for the help, I appreciate it. I bought some lights off of ebay and the seller advertised it as a kit with instructions. Well, they provided no instruction. I managed to get 7 of the 9 LEDs to work (thanks to this video). The only two that I can figure out are the two that are forward (in the car) of the two lit at 3:05 of your video. I replaced them as your video showed. I also rotated them 180 degrees and they don't light up. Am I missing something? Any help is appreciated.

Just done it following this video thank you very much

Hi, can you advise what led's I require to update all interior lights on my 2008 V70

Dude it worked a charm Thank you thankyou...

Do i have to change all the bulbs? I change the first 2, now the last 2 + the 2 in the back doesnt work...

Had me fuck been trying to rip these out all morning lol. Thanks

Thank you for this video.

from where do you got the L.E.D's?

It worked for me. I had to switch polarity on two bulbs.

Searched but could not find T10 bulbs with Can-Bus that had the removable base! Can anyone supply a link for these?

Cuantos focos T10 necesita ?...

thanks for the video. replaced the bulbs but two leds are now glowing slightly even in standby/ what could be the issue? thx!

Will this work on all year Volvo s60? I have a 2012.... this would look awesome!

Plz how do i replace the License plate and sun visors

Hello, is it possible to send a picture of the top of the plafonier? Just to check which one is the right way to put the blue holder light. I already did it, I already swapped the leds and the leds are not giving any light. Someone can give me a help, please?

For my s60 2015 no need to use a tool to extract the bulb, only pull them out of their fixation

Hi ,,, Does any one know the way how to remove the Internal rearview mirror for my XC60 2010 Please ,, I need to replace it & i don't know how ? I need your assistance . Thank you very much

heyyya, where do I buy this LED kit? :D

Was it easy to get it off the roof to work on it?

How do you remove the plafonier? Tanks

Anyone else have issue that the lights do not completely turn off? In off position they are completely off, in on position they are nice and bright. In neutral position once they dim out they still have a little current to them and are dimly lit, it stays like this indefinitely with car off.

So I replaced all 4 bulbs but the two closest to the windshield are not working? I did them the same way I did the other 2. Any ideas?

Didnt need to do all this shit on my 2016 xc60 lux nav. Has push in 501/w5w bulbs took 2mins to change and looks great.....Simples!

I did this also but when I was finish the airbag warning light çomes on

I tried to do it my self and ended up with no lights. I fucked everything up. Heelp

witam czy Twoje ledy nadal lekko świecą po wyłączeniu tzn w pozycji neutralnej?

Imagine doing this for all the bulbs.. just buy some new holders...

Not needed anymore...buy plug n play

There must be an easier fitment than this. This really looks like a botch job.