Hey everyone, My first grasshopper tutorial, let me know if you have any comments! Plug-ins: www.grasshopper3d.com/group/we...
Пікірлер: 57
@danielirala48724 жыл бұрын
Awesome tutorial! Ive tried tones of tutorials and finally, my 3D works thanks to you
@rachelm19794 жыл бұрын
Thank you! I've spent forever trying to get a Voronoi pattern on a spiral loft of catenary curves. I'm new to grasshopper, and everywhere I read, they said it wasn't possible. I'm so happy I found this tutorial!
@pacolevine54786 жыл бұрын
Nice tutorial, alot of good info, well explained. Many thanks
@stijnjagers23185 жыл бұрын
nice tutorial Thomas. Is very good.
@alonsorodriguezm.26852 жыл бұрын
Thanks, that was a beautiful tutorial
@PureWinterLover5 жыл бұрын
This is really awesome!
@anthonwijaya77544 жыл бұрын
Thankyouuu, u just save me from my final exam, goodjob
@iandavidson4813 жыл бұрын
Thanks for your time. very helpful tutorial
@gatificando6 жыл бұрын
Just perfect!!! Thank you
@tepanbanderas95775 жыл бұрын
Thank you! Great tutorial!
@metal3d2022 ай бұрын
thank you! nice tutorial.
@puyakhalili4 жыл бұрын
Thank you this is so helpful. :)
@nelsong57506 жыл бұрын
Thank´s a lot Thomas...
@pdrgn3 жыл бұрын
really helpful! Thank you!
@sarannyasharrma44242 жыл бұрын
Hi thank you so much for this video! I have created my voronoi pattern on a separate square/bounding box and was wondering how I should go about attaching that voronoi pattern to the ellipse that I have created. ANY TIPS WOULD HELP!
@DiegoLopez-lk7rk3 жыл бұрын
Nice tutorial!! Saludos de Chile :)
@imanh925 жыл бұрын
Thanks man!
@andresgonzalez88023 жыл бұрын
Very nice...
@Awras_Dz6 жыл бұрын
its verry nice vedio thank you verry much
@oleksandr.vorobiov Жыл бұрын
Hi! Great job! Is it possible to randomly generate the seeds until the edges are in some length diapason? And then export the coordinates of the edges.
@ArquiKev6 жыл бұрын
Muy bueno Saludos¡
@xintong31683 жыл бұрын
Thanks!
@sparky-makes83733 жыл бұрын
looks great! thank you! - I would ad bifocals to your videos though, it adds a bit more visual info
@jennagauder4376 жыл бұрын
hi! when using the polyline function to close the brep|brep lines, it creates straight lines on the surface rather than curving with the surface. is there a way to make these lines curve with the surface?
@lpkorn5 жыл бұрын
I noticed that too at around 11:00 mins in. I'm trying to figure out how to keep the curved edges, cause it defeats the purpose of making the whole bounding box step if we're going to lose the curved edges anyways. Did you happen to figure anything out since your original post?
@TheWALAESHE6 жыл бұрын
hey thomas i faced a problem with loft component, do you have an idea why its red and doesn't work thank you
@ikakosa6 жыл бұрын
I know a little, but I know definitely that you need to do the following: in>grasshopper>(right click)>bake command to have a geometry in rhino otherwise its in grasshopper only
@borjarodinotome46895 жыл бұрын
Hi, i have a question In rhino, i have a set of points and i want to group them on voronoi surfaces. In this case, i have 4300 points and i want to group them into 10 voronoi surfaces. I dont jnow how to make this simplification. I need help. In other words, i have a map with the ubication of 4300 houses, i want to place 10 hospital in the map but i dont know... Thank you!
@AllesGaatKapot5 жыл бұрын
hello thomas (and others willing to help). i am trying to combine the voronoi pattern to a triangle trigonometry but have no clue which nodes to put in-between to make it work out. any help would be greatly appreciated!
@hbh10815 жыл бұрын
Did you find how? i'm trying to do the same
@fouedbendaya54315 жыл бұрын
can i do this without grasshopper ? i never used it
@liorori6 жыл бұрын
Hi Thomas - Great Tutorial. When I try to loft the polyline and the scale geometry it's not possible. Only one of them can be directed to the Loft function. Any Ideas?
@PaolaWestower6 жыл бұрын
Same problem here!
@lucamazzetti67595 жыл бұрын
For whose they still want to know! use the merge option to input the 2 sets of curves and output in loft
@rash_j47014 жыл бұрын
@@lucamazzetti6759 OMG it works
@kenishaluthfiya64313 жыл бұрын
@@lucamazzetti6759 hi i know its a bit late, but i dont quite get it. what do you mean for "2 sets of curves"? what should i connect with the merge option? hope you see this thanks!
@christianinfante76813 жыл бұрын
@@lucamazzetti6759 i it works, thanks!!
@abdengineer62254 жыл бұрын
hello can i add this pattern to the hatch menu and how
@borispalic37693 жыл бұрын
sorry to bother you, i got a somewhat complicated shape, and when i try to use a scale box and then type 1.1010 it offsets the surface but intersects with it as well. I tried changing the distance a little more but it was still intersecting. Any ideas on how I can fix this issue. Is there any way for me to move it up or down a little so i can continue with the design?
@SanjeetMukadam Жыл бұрын
I have the same problem
@sergioaude42286 жыл бұрын
Hello Thomas, thanks for your first Grasshopper tutorial. I have found some problems when I connect "Average" : "Invalid cast: curve >> Primitive data type" Can you upload the gh file? So I could comparate it. Thanks in advance!
@sergioaude42286 жыл бұрын
I did it! Thanks and waiting for a new tutorial from you
@st33llock6 жыл бұрын
I'm sorry, looked it up but never actually saved the file.. Did you figure it out?
@sergioaude42286 жыл бұрын
Yes, I did it! Thanks Thomas
@cansu43373 жыл бұрын
Hi! how can I write on the grasshopper canvas?? My name and question no should appear on the canvas due to the exam.
@claudiofeldman5 жыл бұрын
The perimeter of the baked-figure-voronoi is thinner than the rest, ...i dont understand why?---can you explain that ?--Thank you ! ( Good tutorial)
@yellowsquare59982 жыл бұрын
same here...
@yinnoah73436 жыл бұрын
When I connected to the polyline, it said it "insufficient point for polyline" I am wondering how to solve this problem. Thank you.
@PaolaWestower6 жыл бұрын
I have the same problem! did you solve it?
@meganrobinson98895 жыл бұрын
I have this problem too...
@duda_xyzw5 жыл бұрын
did anyone find a solution for this?
@borispalic37693 жыл бұрын
Anyone know why my loft command states: 1. Data conversion failed from Curve to Loft Options
@MicheleMattana Жыл бұрын
thank you! saved my ass
@wafirulaqli Жыл бұрын
Hi, I've tried this parametric scheme but I'm having trouble with this warning: "1. Solution exception:Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index" ...is there any solution for this kind of problem?
@wafirulaqli Жыл бұрын
the warning appears in the Loft component btw..
@gullibleboar35115 ай бұрын
I'm having trouble installing the plugin, do you know how to bypass this part? it basically tells me that the installation on the server fails, how did you do it?
@lestatt123 Жыл бұрын
Duude I thought you will not use add other pluggins.... :(