Voro's 3d School: Hovering and Torque Rolling Tutorial

Рет қаралды 171,031

11 жыл бұрын

This is a tutorial on Hovering, prop hanging and torque rolling.
Don't forget to like this video and subscribe for more tutorials and airplane reviews.

Пікірлер: 121

@appgamer3106 4 жыл бұрын

Best tutorial I’ve seen on this subject. I’ve been trying to learn the hover for a long time. Great job

@TobyBurt Ай бұрын

Thank you Voro, I look forward to watching all of your other vids.

@kenjackson4319 10 жыл бұрын

I bought a VisionAire the end of November. Flown it 4 times. Been working on Phoenix and discovered this plane by process of elimination. It is by far the best hoving plane. I have been doing fairly well. Maybe not enough to fly my visionaire that way, yet. Your video answered all the questions I currently had and seeing you fly the same plane was awesome! Thanks for making this video. Main Bird is a TRex 500 DFC with 3GX, but looking forward to spring and Hovering and torque rolling before or after my TRex flights. Learned Helis first. Thanks again. Ken J.

@richardstaccone1927 2 жыл бұрын

Voro is a natural at teaching 3D flying. He also is very skilled at flying RC planes.

@altbob 10 жыл бұрын

Best instruction video of it's type I've come across, thanks!

@wuest3141 11 жыл бұрын

Excellent advice. I haven't found any other videos that will go through the whole list of primary skills needed for 3D maneuvers.

@zstanman482 4 жыл бұрын

Hey Voro, you are the best 3D instructor on the internet, especially for us novices. You are a really good communicator and instructor. I noticed there are no videos that show how to do a snap roll or even what a proper snap roll is. There are a few on the subject but they are horrible or actually don’t show how to actually do one. Will you please do a video on a snap roll; what it is and how it’s done? Thank you sir and keep up the great work!

@Rob-vt1mz 3 жыл бұрын

He looks inactive. Hasn't put out a video in 2 years. I agree though good tutorial videos.

@krotchlickmeugh627 3 жыл бұрын

@@Rob-vt1mz he is dead

@gbro8822 9 жыл бұрын

This is the Best one that I have found. Cant wait to look at the rest . Thank you

@Acula33RC 10 жыл бұрын

Another helpful tutorial. Great job Voro.

@beatloop383 8 жыл бұрын

Your videos are very informative bro, I'm learning 3d now on phoenix 5.0 and you are a massive help. cheers

@stephenrumer6953 8 жыл бұрын

Excellent videos, Thank you! These helped me perfect my aerobatic flying ALOT!

@TheStickyBusiness 8 жыл бұрын

Thanks a lot for your tutorial, exactly what I was need. You got a new subscriber, keep up the excellent work!

@lordservant1 9 жыл бұрын

you rock! love the tutorials! so kind of you!

@rayh2535 11 жыл бұрын

Thank you for taking the time to put this up. It helped me alot

@azgunguys8208 8 жыл бұрын

voro your vids are great. I'm learning a ton thanks a lot

@Turbo93notchback 11 жыл бұрын

Thank you for this. I've been using the Phoenix sim as well, and didn't know about the torque roll trainer. I'm working on not over controlling line you mentioned in this video. Thanks again.

@ThePoolSharkWizard 11 жыл бұрын

Great Instructional videos man, I'm happy to see another KZfaqr like myself doing Phoenix 4 Videos! Keep up the awesome videos! :)

@mountainmeister7996 11 жыл бұрын

Very nice man, didn't miss a thing. Thanks

@jefffozard3115 10 жыл бұрын

Cool. Just got a UMX 3d Beast AS3X and this is just what I needed to start to learn some basic 3d. Great presentation.

@krotchlickmeugh627 3 жыл бұрын

Good luck im sure you found out that a gyro doesn't work for 3d

@royd7984 4 жыл бұрын

Thanks for this very helpful video. You're a great instructor. I'm not there yet but I hope to be someday.

@take2flite 10 жыл бұрын

I have to agree that this is a remarkably good tutorial video. How did it take me so long to find it?! Thanks Voro!

@TheGreenTucan 10 жыл бұрын

you make it look so easy! im using the flight sin on the iphone at the moment

@praveensharma3456 10 жыл бұрын

Thanks bro.. Great tutorial

@MrJamie6031 Жыл бұрын

Good tutorial, thanks!

@William72Wesley 9 жыл бұрын

Great Video! Thanks!!!

@SiliPlays 10 жыл бұрын

thanks, helped me a lot :) Didnt know that with the right aileron

@masonmiller3456 11 жыл бұрын

your way better now bro. sincerely live 3D

@masonmiller3456 10 жыл бұрын

i still laugh every time when you say that its a plane that thinks its a helicopter -Live 3D

@icejd7 8 жыл бұрын

Love your videos! Helps out a lot. Can you make a video on Phoenix simulator settings, expos, dual rates? Your videos are always easy to understand.

@andrewsherriff1702 9 жыл бұрын

great video thanks

@peterwinnett4370 3 жыл бұрын

Very good, thank you :)

@TheRd2468 4 жыл бұрын

Hi, aI wanted to learn all of this . Do I have to do especial setting in the radio in order to do 3D? I am a Futaba guy. Thank you and congratulations, love the way you teach.

@sk8erdude960 10 жыл бұрын

voro your the best

@VoroRC 10 жыл бұрын

Duel rates is a very personal thing. I, personally do not have low rates. Every flight I'm in high rates only and that is as much throw as I can get out of the surface. Typically 50 Degrees on aileron and rudder and 60 degrees on the elevator. Thanks, Voro

@FrenchRacer58 8 жыл бұрын

First thank you for all the wonderfully educational videos. Amazing stuff. What model and flying field are you using ?

@mikedrz 8 жыл бұрын

Coming from RC helis I was able to pick up prop hanging quickly. It's weird though because your ailerons become the rudder and rudder becomes your aileron. At least when compared to heli. Still working on belly in thanks for the tips! :)

@schraubergott46 Жыл бұрын

wow so cool. very nice tutorial, i will use it to learn first 3d flighst with the simulator and hope soon in real :) thank you!

@quaddog6689 7 жыл бұрын

Great tutorials! Do you suggest learning to harrier first or hover?

@JMULIKOW 11 жыл бұрын

Thank-you!!

@quinnb3935 11 жыл бұрын

thanks a bunch dude...

@MrTHEGUITAROCK2 7 жыл бұрын

You are amazing

@tainguyen5410 11 жыл бұрын

Thank you Bro.

@Bryan-ot1yz 7 жыл бұрын

can I do this on my rc airbus

@shajankthomas7443 8 жыл бұрын

Hello there Voro, Some real great flying there. Been trying for some time to learn this, first on the phoenix sim and then possibly actual. Am a novice pilot myself. Have tried out few loops and rolls on the sbach. Kindly advise how to proceed and get there. Thanks a lot and keep going higher.

@ValterFavarao 10 жыл бұрын

How about the dual rate and apx for it how much dual rate you are using when you configuration ion the radio. Thanks nice video

@hadjnabil4811 3 жыл бұрын

thank you

@darticus1 9 жыл бұрын

I fly all electrics and have the Phoenix 5 sim. Which plane do you think I should try to use for this on the simulator. I was working on rolls and did pretty good usings the Yak 30. Can you advise to plane type and any special settings. Thanks Ron

@shirdiali 8 жыл бұрын

Hi Voro RC i usually fly quadcopters and after seeing your video i decided i really want to get into Rc planes. I also got the Phoenix sim 5.0 to learn before i buy any planes. I would like to know if the software (phoenix) is compatible with the microzone MC6 transmitter or Flysky I6 transmitter? The one i aim to buy I am getting options those two options for RTF but i notice mosr RC planes comes with PNP so was hoping to get a good tranmitter that i can use with the phoenix sim and also fly my planes. Thanks

@OsceolaLongBeard 10 жыл бұрын

man i love this cause its hard to do!

@gaudreysweeting2690 10 жыл бұрын

when i click torque trainer it just come off and i click again it exitz again any tip on how to fix this

@GIZZIT12 8 жыл бұрын

If you have never done any 3D, how long do you thing it would take to learn the "hover"?

@thiagobrain 8 жыл бұрын

Are you using exponential and dual rate? If yes, which percent?

@zig0915 9 жыл бұрын

thanks

@sr-sr592 Жыл бұрын

TIP: When doing belly facing hover ...remember THE LOWER WING GETS THE STICK. Will help you get comfortable asap

@rev9fan1 11 жыл бұрын

What was all the setting for you doing this as far as CG, D/R and expo? Cause I keep practicing and I can't get it. Also do you have any pointers on how to learn to use the controls with out my thumb tips, I heard its worse for you to do that.

@VoroRC 11 жыл бұрын

CG should always be perfectly balanced. D/R usually set between 100 and 150% and expo right around 70% on every surface. But expo is totally up to the pilot. As far as thumb tips, I'm not really sure, I use both index finger and thumb on the sticks (pinching the sticks), you might try that as you don't use the tips as much. But ultimately I wouldn't know, it comes down to whatever feels comfortable for the pilot.

@ryanmoore1439 10 жыл бұрын

I learned them all in 5 minutes of hovering. I can stay perfectly still in front of my face

@Douglas-ic7tk 10 жыл бұрын

RealFlight has the Hover training as well.

@jeffhudson9130 4 жыл бұрын

okay so what simulator and what plane is this??

@GaryKrum 4 жыл бұрын

Cool video, what simulator do you use??

@shabisahilrc973 5 жыл бұрын

sir can i ask to you which software u have for recording the simulator. if yes please reoly to me. your wotk is great.

@jeffhudson9130 4 жыл бұрын

its phoenix which is dead now so only RealFlight 8 is left unfortunately not as good of 3d planes

@cuthbertmilligen 4 жыл бұрын

Great tutorial! I have a question... what is your mindset? I mean do you think yourself in the position of the pilot, or do you (just) react to the movement of the plane's nose or wings. 'Where are you' when performing these maneuvers? In the plane or an (cool) observer from afar?

@krotchlickmeugh627 3 жыл бұрын

Obviously from looking at the place as youre looking at it youre not in it. What a odd question. Almost seems schizophrenic in a way.

@sirlancair 3 ай бұрын

I replied below. Sorry someone who put a condescending response. The mindset is from the ground looking at the airplane, most of us are not thinking about first person view from the cockpit while flying rc...though, now it is possible to have cameras in the airplane and to fly first person view. IMHO, flying from the ground is more difficult because you have to account for all the positions of the airplane as they change...when the airplane is coming toward you, some controls are reversed as you8re now looking at the airplane from the front..hope that helps.

@JingleStic 11 жыл бұрын

Which program are you using?

@victorgadekrhansen2564 7 жыл бұрын

what game are you play? i play realflight, but what are you used?

@dennisrkb 5 жыл бұрын

does this require a gyro?

@drummerdad80 6 жыл бұрын

Good video I don't like the shurkin for hovering, I like the hangar 9 futana

@Mikinct 3 жыл бұрын

I’m new to RC flying planes. Question- do they sell a beginners RC plane that can take many crashes & still continue flying? I hate to spend $500,800 or 3,000+ then accidentally crash it & it’s no longer flyable. Last question- can you mail the damages RC plane to manufacturer for repairs or are they local places to actually fix RC planes?

@krotchlickmeugh627 3 жыл бұрын

Lol first learn how to fly. Then learn how to build. Then enjoy. Also watch the video. If you have questions use Google lmfao. There are tons of planes that can take a good beating. But nothing is indestructible. You want to learn? Get a simulator. Or find an instructor. Theres millions.

@sapick9082 9 жыл бұрын

Can you send me the plane setting? Thanks

@Saltywalt44 5 жыл бұрын

Probably a dumb question but I just bought real flight 8 and very disappointed with graphics on a high end PC. What program are you using?

@FarmerFpv 4 жыл бұрын

Did you not watch the video? He clearly expresses what flight simulator he is using. No wonder he's not posting anymore people don't actually watch they just ask questions that are already answered on the video, must get frustrating for him. 😕

@paxtonfiker3195 Жыл бұрын

Plz teach the cobra spin

@shabisahilrc973 5 жыл бұрын

kindly tell me or share to me link of the software you are using for recording Phoneix simulator.

@urnamed32 5 жыл бұрын

Obs

@spetnazer 8 жыл бұрын

Hi...how much setting (.....%) in throtle, aileron, rudder, elevator, expo do you use? i use 50 % in throtle, 50% in rudder, 30 % aileron, and 50% in elevator, i still try and try but its very hard to make hover.

@masonmiller3456 8 жыл бұрын

he used 40 lb with 50% all around (used to fly with him)

@mikebreler9724 7 жыл бұрын

How do you reset on Phoenix? Do you set up a channel for reset?

@teosteverlynck-horne9351 6 жыл бұрын

Mike Breler you click b

@mikebreler9724 7 жыл бұрын

What simulator are you using to make this recording? Thanks

@gabrielbernart-shenk6908 7 жыл бұрын

He is using Phoenix RC

@mrserious55 2 жыл бұрын

hi interested in getting into the hobby...what size are these planes thx

@mrserious55 2 жыл бұрын

where do i get the RC sims??

@user-dm8eb9fx1r 7 жыл бұрын

Супер!

@lylejt 10 жыл бұрын

Newbie here. How are you preventing the plane from climbing? It looks like you have it full throttle the whole time.

@VoroRC 10 жыл бұрын

Each plane has a different "thrust-to-weight ratio," this plane is just a low ratio. Some planes are higher and can hover at half throttle, and some do not even have enough power to hover, it all depends on the plane and the power system it's using. Thanks, Voro

@VoroRC 11 жыл бұрын

This is phoenix version 4.

@3dmodelinghamid238 2 жыл бұрын

Wıch flaş application please?

@masonmiller3456 10 жыл бұрын

i still laugh every time when you say that its a plane that thinks its a helicopter

@kevinbrooks6265 10 жыл бұрын

can you hover with a trainer type plane,giving that it has enough power ?

@johnberner2012 5 жыл бұрын

kevin brooks yes but you will need to make all the control services twice the size and make sure they throw very large angles.

@krotchlickmeugh627 3 жыл бұрын

@@johnberner2012 thats not true. I hover my avistar all day. The only thing that matters is prop and power to weight

@playerguy2 10 жыл бұрын

what plane you using?

@franparis71 4 жыл бұрын

It's Phoenix R/C and the plane is Shuriken, great for 3D flights.

@AleMartin425 5 жыл бұрын

Great video! What's name of this simulator?

@ribeiroflyby9766 5 жыл бұрын

Phoenix simulator

@ConsultingjoeOnline 9 жыл бұрын

What flight sim is that?

@alfiecartwright9655 5 жыл бұрын

Pheonix rc

@justnn1115 3 жыл бұрын

what is this game called

@MatthewTaylor3 6 жыл бұрын

Which simulator is this?

@alfiecartwright9655 5 жыл бұрын

Pheonix rc

@jamalmahroof3298 7 жыл бұрын

I thought this was real until he showed the tools in the windows lmaaaooo

@ImCompletelyBugProof 8 жыл бұрын

what game is this? is it for a computer?

@Sky_Burger88 8 жыл бұрын

+Kyler Young Yes. Which simulator is this??

@xelarion8629 6 жыл бұрын

Kyler Young PhoenixRC

@civilEngineering1145 7 жыл бұрын

what are the name of pc software please?

@Jaburu 7 жыл бұрын

Phoenix RC

@civilEngineering1145 7 жыл бұрын

THANKS

@2704tania 9 жыл бұрын

What's the name of this game and what is it for??? Reply if you know...

@ClassicFIHD 9 жыл бұрын

It's the Phoenix Flight Simulator.

@jonas804 9 жыл бұрын

Hey VoroRC! Thanks for the great video. Is it the Phoenix Flight Simulator 5? And which controller do you have? Please answer fast! :-)

@jakebauer3178 9 жыл бұрын

What app

@REVobey 9 жыл бұрын

It isnt an app, RealFlight 7 on pc. Great ''game'' helps so much practicing rc.

@5Zyl-Rengo 9 жыл бұрын

WolfGamerx Hahahha dude thats not Realflight 7 ist Phoenix. Pls dont write a comment when you dont know the right answer. :D

@akbaromar2209 7 жыл бұрын

looks difficult