Vsett 10+ FIX FOR FOLDING HANDLEBARS - the ONLY solution
Рет қаралды 4,519
Жыл бұрынA BOTTOMING tap would work the best. Just make sure the setscrew matches your tap selection. Please LIKE vote this video if it helps.
@michaelwilkinson4337 Жыл бұрын
Good idea. I just used a big drop of red Loctite on each side. They have never vibrated loose again (at least they haven't over the past 1140km/708miles) and I can still open them in I need to transport it in a hurry.
@DARK_AMBIGUOUS 8 ай бұрын
I put blue loctite on the bars for my Vsett 8+ and so used so much that now my bars are literally stuck, like I can't get that unscrewed now, I tried twisting sooooo hard that my hand hurt. I'll keep trying to get them loose again
@DARK_AMBIGUOUS 8 ай бұрын
You should use Blue loctite because blue is for screws that are meant to be taken off and put back on. Red loctite grips tighter but it's for one time use like on bolts for roller coasters and stuff, once you unscrew a screw that has red loctite, you'll have to put more on
@thomasgregoritsch8332 Жыл бұрын
Brilliant Idea. 👍🏼
@DARK_AMBIGUOUS 8 ай бұрын
Just put Loctite Blue on the bars, I put some on and now I can't even get them off. Both are stuck now. It worked too well
@alagappasgostan9982 Жыл бұрын
Much easier with pipe white tape
Inventor K
Рет қаралды 37 М.
Tips 365
Рет қаралды 2,7 М.
Wrecker
Рет қаралды 464 М.
Photographer Army
Рет қаралды 9 МЛН