VW Golf Mk6 GTI How to Install Sequential Tail Lights

Рет қаралды 73,358

3 жыл бұрын

I will show how to install led sequential tail lights in a MK6 Volkswagen Golf GTI. I will show in detail how to remove the trunk hatch panels, and how to run the wires from the light on the body to the lights on the trunk hatch. This should be applicable to the GTI's from 2010-2014.
//SUPPORT THE CHANNEL
Get CWB Merch and Custom Parts Here: craftyworkshopbuilds.com
Support on Patreon: / craftyworkshopbuilds
//RELATED VIDEOS
Rear Wiper Delete - • VW Golf MK6 GTI Rear W...
Big Turbo MK6 GTI First Review - • My Big Turbo MK6 GTI F...
Wheel Stud Conversion Kit Install - • VW MK6 GTI Wheel Stud ...
//TOOLS AND PARTS USED
Trim Removal Tool Kit - amzn.to/2HdMf0g
Electric Ratchet - amzn.to/3kK3T9Y
8mm Socket - amzn.to/3387toD
10mm Socket - amzn.to/3i0xgTX
T*20 Torx Socket - amzn.to/3iZpPh2
Tail Lights - amzn.to/3kK6FMj
//CAMERA GEAR
○Primary Camera: Sony a6400 - amzn.to/2FYnAwb
○Lens: Sony E 18-55mm f/3.5-5.6 - amzn.to/3cpeN1Y
○Secondary Camera: GoPro HERO8 Black - amzn.to/301z2xV
○Primary Mic: Rode NT-USB-Mini - amzn.to/3x8ydkO
○Secondary Mic: BOYA by-MM1 - amzn.to/3kGS44w
○Light: VILTROX L116T - amzn.to/2RSqkh5
○Tripod: MACTREM CT62 - amzn.to/3i5aJp6
//STAY CONNECTED:
Instagram - / crafty.workshop.builds
Twitter - / craftyworkshopb
Facebook - / craftyworkshopbuilds
DISCLAIMER: Some links included in this description might be affiliate links. If you purchase a product I may receive a tiny commission. There is no additional charge to you! It costs you nothing but helps me big time in keeping these videos coming. Thank you for supporting my channel so I can continue to provide content.

Пікірлер: 241

@kylelevin5855 3 жыл бұрын

FYI.......If you flip the brown and white wire on the left(driver side) hatch light you will get proper duel white reverse lights.

@kylelevin5855 3 жыл бұрын

@The Truth if you flip the wires it's a fog light delete.

@leonardoarispe4689 2 жыл бұрын

Do you flip the wires on the tail light assembly connector? Or the body connector?

@kylelevin5855 2 жыл бұрын

@@leonardoarispe4689 tail light assembly connector.

@BadPhD777 2 жыл бұрын

So glad to read this! I was giving this mod a second thought because I like all the illumination I get from two reverse lights when using my backup camera.

@MonumentalDong 2 жыл бұрын

Thank you for this comment my dumbass thought my bulb burnt out.

@sheldonbroadbridge5497 3 жыл бұрын

Thats the best tutorial I've seen on this subject, will be doing my golf mk6 this weekend, definitely worth a viewing

@CraftyWorkshopBuilds 3 жыл бұрын

Thank you! Respect 👍🏽

@cashali4747 2 жыл бұрын

You all probably dont care but does someone know a method to log back into an Instagram account? I was stupid forgot my account password. I would love any tricks you can offer me

@romeonoah7101 2 жыл бұрын

@Cash Ali instablaster =)

@cashali4747 2 жыл бұрын

@Romeo Noah I really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff atm. Seems to take quite some time so I will reply here later with my results.

@cashali4747 2 жыл бұрын

@Romeo Noah It did the trick and I now got access to my account again. Im so happy! Thank you so much you really help me out :D

@Caballeroshot 3 жыл бұрын

I haven't wanted to mess with mine until I saw how easy you made this look. Great info, thanks for the video, definitely following.

@CraftyWorkshopBuilds 3 жыл бұрын

Thanks for watching, welcome to the crafty family!

@CALLOFDUTYHQ1 3 жыл бұрын

This video needs way more views this is the best walkthrough I’ve seen to date ! I deadass left my shit all open just to find another video cus it was frustrating

@CraftyWorkshopBuilds 3 жыл бұрын

Much respect! Hopefully more viewers can find this video and get help as well. Thanks for watching and expressing your benefit.

@jayv5012 9 ай бұрын

Because of this video, I've been able to install the VLAND lights. Something I would have never thought about doing myself. Thank you!

@CraftyWorkshopBuilds 9 ай бұрын

Glad I could help! Thanks for watching.

@tdipwr5020 3 жыл бұрын

You made running the wires through the rubber grommets look easy, I found that to be the hardest part of this job on my car.

@CraftyWorkshopBuilds 3 жыл бұрын

Yea, it's definitely a challenge. That's why I showed my technique.

@Dave-mt2ou 2 жыл бұрын

Mate by far the best tutorial I have seen also! Concise and no nonsense. The job looked daunting from the outset but after watching this i'm pretty keen to give it a go! Thanks a heap. :)

@CraftyWorkshopBuilds 2 жыл бұрын

Thanks for watching and acknowledging my work! Much respect 👍🏽

@EasyMac02 3 жыл бұрын

Dude, legit you are making it too easy for us. Keep up the great work!

@CraftyWorkshopBuilds 3 жыл бұрын

Thank you! For sure, I got alot more to share.

@lancekim9282 3 жыл бұрын

Best tutorial on this mod I have seen so far. Very informative. Nice work!

@CraftyWorkshopBuilds 3 жыл бұрын

Thank you! 👍🏽

@_Joker1016 3 жыл бұрын

Good, detailed, easy to follow tutorial. was gonna pay someone to do it for me originally but I'll do it myself and see what I can break!!

@CraftyWorkshopBuilds 3 жыл бұрын

You should be good, once you're patient. Good luck with your install!

@brandonclarke1117 2 жыл бұрын

thanks for this vid! was hesitant to do myn but followed this and was made simple. straight to the point guide, really easy to follow

@CraftyWorkshopBuilds 2 жыл бұрын

I'm happy you got value from this video! Yea, I do my best to provide as much details as possible. Thanks for watching.

@othmane3863 3 жыл бұрын

Honestly, you made the best video on this install - thank you a bunch man

@CraftyWorkshopBuilds 3 жыл бұрын

Much respect! Thanks for watching.

@steverblock 6 ай бұрын

Very Grateful for you taking the time to post this very useful Video Mate👍🏻👍🏻

@CraftyWorkshopBuilds 6 ай бұрын

Much respect👍🏽

@bigtreesfall 3 жыл бұрын

Best tutorial I've seen on this install. Thanks for taking the time to share.

@CraftyWorkshopBuilds 3 жыл бұрын

I'm happy you found this helpful, thanks for watching!

@dylanmaynard3172 3 жыл бұрын

Will definitely be using this video for installing mine! Appreciate it

@CraftyWorkshopBuilds 3 жыл бұрын

I'm glad you got value from this, Much respect!

@chrisjones444 2 жыл бұрын

This video was awesome! Nice music, not overpowering the video. And step by step, thorough, and at a good pace! Thanks for pointing out those pesky clips!

@CraftyWorkshopBuilds 2 жыл бұрын

Thanks for watching and acknowledging the audio quality! Yea, the clips can be a pain to remove.

@theso6645 2 ай бұрын

I mounted mine this week. Your guide helped me a lot. Thanks!

@CraftyWorkshopBuilds 2 ай бұрын

I'm happy you found this guide helpful! Thanks for watching

@ProTaggerT3 3 жыл бұрын

Best tutorial on KZfaq! Going to try this out, thanks a lot.

@CraftyWorkshopBuilds 3 жыл бұрын

Thank you! Good luck on your install.

@ewwmin3m 6 ай бұрын

Man thanks a lot for your mk6 DIY guides. I just got a mk6 gti and I've been wanting to wrench more. Your vids have been very helpful

@CraftyWorkshopBuilds 5 ай бұрын

Welcome to the Mk6 family! I'm happy you're getting value from my videos, thanks for watching!

@BenRobbo5597 10 ай бұрын

Best tutorial on here no joke. Showed everything in detail. Much appreciated

@CraftyWorkshopBuilds 10 ай бұрын

Much respect 💪🏽

@jayv5012 11 ай бұрын

Amazing thank you. You made it look so easy i think im going to order some lights. Been scared until now!

@josdavids 3 жыл бұрын

Nice video, very clear and calm explanation! Was major help for me.

@CraftyWorkshopBuilds 3 жыл бұрын

I'm happy I was able to help, thanks for watching!

@gumball2077 2 жыл бұрын

Thank you so much for this, took a bit of time but it was worth it. It looks menacing, especially at night. 💥

@CraftyWorkshopBuilds 2 жыл бұрын

Respect! Yea, they definitely makes the car look more aggressive.

@RIS3N1 2 жыл бұрын

You know your tutorial is good when no one points out you said "m k 6" 😂. Amazing video, helped me out a ton!!

@CraftyWorkshopBuilds 2 жыл бұрын

😂 lol, thanks

@Anthony-vs4xg 3 жыл бұрын

best tutorial iv seen ,getting mine hopefully this week!

@CraftyWorkshopBuilds 3 жыл бұрын

Thank you! Good luck with your install.

@kanga287 2 жыл бұрын

Amazing tutorial! You made it look way easier than it was to get those wires through LOL

@CraftyWorkshopBuilds 2 жыл бұрын

Thanks! Yea, that's definitely the hardest part of the entire process, but it's doable with patience. Lol

@marioncjackson8120 3 жыл бұрын

Well done great job installing GTI LED rear light!!!

@CraftyWorkshopBuilds 3 жыл бұрын

Respect and Thanks for watching!

@daleyraymond4447 Жыл бұрын

Thanks bro very helpful! Respect from Darwin NT Australia 🇦🇺 🤙🏾💯💯💯

@CraftyWorkshopBuilds Жыл бұрын

Much respect 🙏, show out to everyone watching from Australia!

@TopShevy 11 ай бұрын

I need to install these on my Mk6 gti build. I’m currently posting my car journey on KZfaq too. Your content is really good and helpful. Thank you

@CraftyWorkshopBuilds 11 ай бұрын

I'm happy you found my content helpful! Much respect and thanks for watching!

@CraftyWorkshopBuilds 11 ай бұрын

Much respect and thanks for watching!

@harveyfaraday-drake1953 10 ай бұрын

Looked daunting doing it from the video was going to pay someone to do it but thanks for a very helpful video :)

@jimbojonesporfavor 2 жыл бұрын

Amazing job and fantastic tutorial! Thank you!

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect and thanks for watching!

@mattwilson7487 2 жыл бұрын

This REALLY helped me install mine. Thanks man!

@CraftyWorkshopBuilds 2 жыл бұрын

I'm happy I was able to help! Thanks for watching.

@MC-dw5or 11 ай бұрын

This is the best video on this subject. The hatch trims and the cable grommet were excluded by the other videos

@CraftyWorkshopBuilds 11 ай бұрын

Much respect and thanks for watching!

@neles3488 2 жыл бұрын

Thanks for the good tutorial thanks to you it helped me do this! Good video and good info 👍🏻

@CraftyWorkshopBuilds 2 жыл бұрын

I'm happy I was able to help, and thanks for watching 👍🏽

@jmebag1 3 жыл бұрын

Thanks man. Saved me and my bro a lot of time!

@CraftyWorkshopBuilds 3 жыл бұрын

I'm happy you got value from this! thanks for watching.

@CianArranEoin 3 жыл бұрын

Neat job, great instructions 🤙

@CraftyWorkshopBuilds 3 жыл бұрын

Thank you!

@cameronlegree 3 жыл бұрын

Thanks so much for the help man!

@CraftyWorkshopBuilds 3 жыл бұрын

I'm happy I was able to help, thanks for watching!

@Gkpina_25 11 ай бұрын

This tutorial was amazing compared to the others this made me feel better about doing this my self tbh!

@CraftyWorkshopBuilds 11 ай бұрын

Much respect! once you follow step by step, you'll be good to go.

@kaisarkhan 2 жыл бұрын

Great video, detailed 👌🏼

@CraftyWorkshopBuilds 2 жыл бұрын

Thank you!

@adisamitchell8418 10 ай бұрын

Thanks is was great help with the installation.👍🏿

@CraftyWorkshopBuilds 10 ай бұрын

I'm happy you found this video helpful, thanks for watching!

@michaelhandrick4851 3 жыл бұрын

Sound out man 👍

@HHH906 2 жыл бұрын

Amazing work

@CraftyWorkshopBuilds 2 жыл бұрын

Respect 👍🏽

@ln1n056 3 жыл бұрын

Very nice man, this is the first tutorial that really works , i made this mod last week and i needed to get down all plastics in trunk but now i see i could just loose this up one and feed the wire like you... but fuck off :))) i already have make it , very well done bro !!!!!

@CraftyWorkshopBuilds 3 жыл бұрын

Thanks for watching! Yes, this is a tedious project. That's why I made the effort to show the details. The trunk panels can be intimidating to remove.

@maurice2k10 3 жыл бұрын

Nice job!

@CraftyWorkshopBuilds 3 жыл бұрын

Thank you!

@Smooth_swazz29 9 ай бұрын

Great video definitely help with the install. Im getting this warning light for the rear left turn signal any ideas?

@dynamicshit 3 жыл бұрын

AMAZING. GREAT VIDEO. I noticed your headliner is just like mine.. If you ever get around to repairing your headliner PLEASE make a video! Mine drives me nuts.

@CraftyWorkshopBuilds 3 жыл бұрын

Yea, I do plan to do the repair and definitely will make a video on it. Thanks for watching!

@dynamicshit 3 жыл бұрын

@@CraftyWorkshopBuilds Sweet!!! Looking forward to it 🤞🏽

@TooDopeDog 3 жыл бұрын

Great video good job

@CraftyWorkshopBuilds 3 жыл бұрын

Much respect! Thanks for watching.

@swoodhall 3 жыл бұрын

They look amazing

@CraftyWorkshopBuilds 3 жыл бұрын

Thanks!

@DOBERMAN715 Жыл бұрын

Your tutorial is absolutely first class, please correct me if I'm wrong but, I believe the VELAND LIGHT fitment is not as good as it should be. But thanks again for the great tutorial.

@CraftyWorkshopBuilds Жыл бұрын

Much respect! The fitment is good enough, it's not as snug as oem.

@davidthedrummerengineer 2 жыл бұрын

This took me like 6 hours, but did it, thanks m8 😆

@CraftyWorkshopBuilds 2 жыл бұрын

Much respect, I'm happy you got it done 👍🏽

@davidthedrummerengineer 2 жыл бұрын

@@CraftyWorkshopBuilds have you had any problems with the lights, since you know…they’re Chinese? It’s my only concern

@CraftyWorkshopBuilds 2 жыл бұрын

@@davidthedrummerengineer nah, they still work without issues so far.

@RaYzor__ Жыл бұрын

Best tutorial

@CraftyWorkshopBuilds Жыл бұрын

Much respect!

@huzaifakhan6835 2 жыл бұрын

Amazing video! I just had an issue with my clips as a few of them were still stuck in the car when I took the trims out. Was wondering how you removed the few that you had stuck in your video

@CraftyWorkshopBuilds 2 жыл бұрын

Thanks! Yea, I used a needle nose pliers to remove them.

@zulmafernandez5441 2 жыл бұрын

I’ll def break something lol great job boss !

@CraftyWorkshopBuilds 2 жыл бұрын

Respect! Just take your time, lol

@closedlightningthatsireeyz9247 3 жыл бұрын

Best Video i See i love u

@CityOfEvil95 3 жыл бұрын

Can you please do the front headlights that go along with these?

@djreventonofficialaccount6769 Жыл бұрын

im gonna install mines tomorrow tkx thumbs up

@CraftyWorkshopBuilds Жыл бұрын

Good luck with the install 👍🏽

@djreventonofficialaccount6769 Жыл бұрын

@@CraftyWorkshopBuilds installed it just nikked the watertube of the rear window so that i have to replace also to get the plastic cover of was a drama but i got it in the end!

@abzz119 2 жыл бұрын

How are the fitting on them lights? Do they fit good without any movements? I ordered a pair and the clips weren’t going in properly and had a lot of movement

@icookyorice1 3 жыл бұрын

thank you!!

@CraftyWorkshopBuilds 3 жыл бұрын

Respect!

@Lukaslukas793 3 жыл бұрын

thank you friend

@Lukaslukas793 3 жыл бұрын

but you really fast, i took whole morning. cause for me really hard to get wire trgough rubber. itak off black connecter from wire and put soap on, then its more easy

@JohnSmith-ke5zx 2 жыл бұрын

My tailights have resistors but the car already has some, you I add them anyways or cut them off?

@johnnybyup 3 жыл бұрын

I can't wait to upgrade my MK6 light to those baby's

@CraftyWorkshopBuilds 3 жыл бұрын

Yea, definitely worth to upgrade.

@MrMajinHawk 3 жыл бұрын

Nice one👍🏽

@CraftyWorkshopBuilds 3 жыл бұрын

Thank you!

@MrMajinHawk 3 жыл бұрын

@@CraftyWorkshopBuilds well i did this yesterday it came out very nice thankyou! Although i live in germany, and the lights are switched when i put it in reverse mode the fog light is on and fog light is Reverse. Do you know how to fix this? I am waiting for the seller to respond to

@CraftyWorkshopBuilds 3 жыл бұрын

Oh, cool. You can try flipping the brown and white wire, on the driver side trunk light and it should fix it.

@munchhhies 2 жыл бұрын

Does anyone know what that cable is called that you have to connect the two sides of the tail light together?

@DmitriyKl 3 жыл бұрын

Which lights are these? How’s the quality?

@paddymorrison 3 жыл бұрын

Very well done. I’ll have a go at this. How long did it take you?. I’ll add at least another hour or 2 on to that. Lol. Many thanks. P

@CraftyWorkshopBuilds 3 жыл бұрын

Took me around two and a half hours, but that's because I was recording. You should be good to go, lol

@user-sw7lb6uv6s 10 ай бұрын

Do you have a problem with the reverse light one been white, the other one been red?

@Sam-tw2sr Жыл бұрын

This the same install process on a 2010 MK 6 TDI yes?

@Skynexstar 3 жыл бұрын

Hey man, wondering which specific taillight option you got. smoked, red-smoked or red clear (no smoke)? Thanks

@CraftyWorkshopBuilds 3 жыл бұрын

I got the red-smoked.

@NevaLose94 3 жыл бұрын

Any tips for installing the big hatch panel back on?

@CraftyWorkshopBuilds 3 жыл бұрын

Start installing from the part that's closest to the hinges on the hatch, then work your way out. Make sure to align the clips before you apply pressure to pop them in.

@fionnduncan1512 Жыл бұрын

Hi I followed everything But my inner tail lights aren’t turning on Any help Thank you

@Ex4_ 3 жыл бұрын

Awesome! Did really not a single one of your clips break during the process? :D

@CraftyWorkshopBuilds 3 жыл бұрын

Nah, no clips got broken.

@LSM_Lover 2 жыл бұрын

I have MK6 GTI installing these tail lights tomorrow, I know these cars electrical systems are super sensitive, I just had to pay someone to redo alot of it. Should I disconnect the battery first before unplugging and plugging the tail light back in?

@CraftyWorkshopBuilds 2 жыл бұрын

Yea, you can disconnect the battery as a safety precaution.

@adrianmustatea5147 2 жыл бұрын

Hello! Does anybody thinks that the difference between normal lights and brake lights are too subtle and the driver behind you can’t see that you actualy breaking? In my opinion the difference is to small. What do you guys think? Thank you

@fionnduncan1512 Жыл бұрын

Great video So just t25,t20,10mm socket and 8mm socket is that all I need ?

@CraftyWorkshopBuilds Жыл бұрын

Thanks! I listed the tools in the description.

@fionnduncan1512 Жыл бұрын

@@CraftyWorkshopBuilds thanks for the reply Do I need a trim kit? Is it essential Thanks

@dsm7 10 ай бұрын

Thanks for the video, how are these tail lights works now after 3 years, everything is alright ?

@CraftyWorkshopBuilds 10 ай бұрын

Yea, they still work. No issues so far.

@dsm7 10 ай бұрын

@@CraftyWorkshopBuilds Thanks.

@thomaskirchberg4459 Жыл бұрын

How long did this all take?

@alexdillon2214 3 жыл бұрын

best tutotrial so far for these lights

@CraftyWorkshopBuilds 3 жыл бұрын

Respect and thanks for watching!

@totalxq 2 жыл бұрын

Have a "check rear left brake light error" on mine, but all lights are functioning... any help would be nice. Thank you for a well put together tutorial

@CraftyWorkshopBuilds 2 жыл бұрын

Only thing I could think of, is the converter for that side might be faulty. Otherwise, thanks for watching.

@totalxq 2 жыл бұрын

@@CraftyWorkshopBuilds Good news, replacement set came in the mail. No error codes! Thanks again for the tutorial.

@CraftyWorkshopBuilds 2 жыл бұрын

@@totalxq I'm happy you got it resolved 👍🏽

@Sam-tw2sr Жыл бұрын

Did you have issues of 1 or both big parts of the light not sitting flush flat? I have that issue with 1 of em

@CraftyWorkshopBuilds Жыл бұрын

Nah, it wasn't as snug as the OEM, but it was still a decent fit.

@lotifinau3307 Жыл бұрын

Whats the drill called your using bro ??

@jovanirodriguez6171 Жыл бұрын

I have a question, if the clips stay decide to stay in the car instead of in the plastic of the door panels how do you take the clips out? With a plyer?

@CraftyWorkshopBuilds Жыл бұрын

I showed how to remove the clips that got stuck in the video.

@RealDon321 3 жыл бұрын

I have a standard Golf mark 6 TSI - will I still be able to fit these lights to it

@CraftyWorkshopBuilds 3 жыл бұрын

Yes, they will fit.

@ihuss007 2 жыл бұрын

I installed the exact same lights by following this video but my reverse light is red for some reason? Any ideas on how to make it white? Does it make a difference I’m in the UK so the steering wheel is on the right hand side

@CraftyWorkshopBuilds 2 жыл бұрын

That's how these lights come with one reverse light white and the other red. You can check to see in the video, when I showcase my lights, one is red. However, someone in the comment section had mentioned about switching one of the pins to make both lights white.

@ihuss007 2 жыл бұрын

@@CraftyWorkshopBuilds basically my issue was I was getting only one red reverse light and no other light as in no white light on the other side, just the solo red reverse light. However I have since swapped the white and brown wires and it’s now white! Thanks for your help :)

@CraftyWorkshopBuilds 2 жыл бұрын

Ok, cool. No prob.

@faizalazizfaizalaziz3767 8 ай бұрын

How many canbus used sir?

@ert_apx4148 Жыл бұрын

I done this today but I left the wire outside the grommet should I not be doing that? I saw it on the vland video and thought it would be fine but watching your video I'm afraid I will destroy the wire

@itstweeker Жыл бұрын

Haha I did this too. Really struggled trying to get it in for a couple hours and left it out.

@aduako7 Жыл бұрын

Looks awesome! Can you do mine for me?

@eoinomahony3115 3 жыл бұрын

My reversing light and fog light are mixed up tried switching wires but no difference. Has anyone experienced this and know what I can do?

@MMR20 7 ай бұрын

Did you manage to find out what to do?

@saif312 2 жыл бұрын

I saw you bought them on amazon but are all 4 pices included?

@CraftyWorkshopBuilds 2 жыл бұрын

Yes, everything is included.

@joshuajaunin9668 Жыл бұрын

Someone pls tell me where to buy these taillights 😫

@AlmostLastJedi 2 жыл бұрын

What if you already have factory LEDs but you just want the dynamic indicators? Is it still a straight swap or is there some coding or extra steps etc?

@CraftyWorkshopBuilds 2 жыл бұрын

You will need to replace the entire taillights, if you want dynamic indicators. The dynamic feature is built into the taillights.

@AlmostLastJedi 2 жыл бұрын

@@CraftyWorkshopBuilds I know this I meant if I change the entire unit I was told there would be some issues as these are designed to replace standard tail lights. I already have factory LEDs and the wiring is different.

@CraftyWorkshopBuilds 2 жыл бұрын

@@AlmostLastJedi Okay, I see. Maybe someone who have done that same swap could chip in. I've only done the swap on the standard lights.

@jemakful 3 ай бұрын

Why does the black box with the m3 strips gets hot? And is it dangerous?

@CraftyWorkshopBuilds 3 ай бұрын

It's a resistor, it's normal.

@marcorupp6435 Жыл бұрын

Bei mir geht das äußere Licht nicht, Bremse und Blinker geht aber. Was kann das sein?

@jemakful 3 ай бұрын

Bro what is the thing you have to stick with the M3 strips? It gets ho, why is that?

@SpeedyShorts06 9 ай бұрын

did u get any lights on dashboard ?

@CraftyWorkshopBuilds 9 ай бұрын

Nah, no lights on the dash

@propitbikes5554 2 жыл бұрын

Does your boot leak after this when it rains ?

@CraftyWorkshopBuilds 2 жыл бұрын

Nah, no leak

@kippkewish9626 2 жыл бұрын

Did you install the reverse camera too or was that stock, also what year is your mk6

@CraftyWorkshopBuilds 2 жыл бұрын

Nah, there's no reverse camera. It's a 2010.

@kippkewish9626 2 жыл бұрын

@@CraftyWorkshopBuilds thanks for responding. Is it just the latch then where the badge is

@loyalty786 11 ай бұрын

Hi, where can the tail lights be purchased from?

@CraftyWorkshopBuilds 11 ай бұрын

Check the link in the description.

@goratamodise5133 4 ай бұрын

I did everything, but only my parking light is on, they don't go on at the same time. The outer one's only work when I brake. Please how can I get them both running like that without stepping on brake first?

@CraftyWorkshopBuilds 4 ай бұрын

If you've installed the same exact lights as these, and you followed all the steps I showed in the video, it should be working fine. Otherwise you might have a faulty light.

@goratamodise5133 4 ай бұрын

The lights are the same. Not faulty.... Just seems like I've missed a step where I connect them together so they work simultaneously, at the same time. So I don't know how to get them together, what I've missed connecting them on the same line. It's like they running separately not on the same line.