VW Golf MK7 (5G) footwell light retrofit (part 1)

Рет қаралды 63,272

Күн бұрын

Footwell lights installation in Volkswagen Golf MK7 with correct coding and adaptation values to enable full ambient functionality in cars without the interior lighting package. In the first part of this DIY tutorial, first I'm showing how to remove plastic trims on the drives side to access BCM (Body Control Module), disconnect plug C, and add new terminal to the pin 72. Next to connect negative terminal to the chassis ground. All that is left for the part 2, is to guide wiring harness under the dashboard and install the lights in places designed for it on the passengers side and under front seats for back row illumination.
With correct coding you can enable footwell lights to turn on with courtesy lights when you open the door, and will stay on dimmed when doors are closed and headlights are on. In car setup on the infotainment display you can adjust brightness of the background illumination.
The same #footwell light retrofit procedure should fit other MQB cars, like Skoda Octavia 3 (5E), Seat Leon 3 (5F), Audi A3 (8V).
OEM part number that you are looking for is most likely: 5G0 947 409
Lights with wiring harness on AliExpress: s.click.aliexpress.com/e/kd7Dx99I
Coding and adaptation procedure:
Module: 09 (Central Electronics)
Security Access → Code: 31347
Coding → Long Coding → Byte: 05 → Bit: 7 → enable
Coding → Long Coding → Byte: 17 → Bit: 3 → enable
Adaptation → Leuchte30FR LC72 - Lasttyp 30 → 36-LED Kleinleistung
Adaptation → Leuchte30FR LC72 - Fehlerort mittleres Byte DTC-DFCC 30 → 02
Adaptation → Leuchte30FR LC72 - Lichtfunktion A 30 → Fussraumlicht
Adaptation → Leuchte30FR LC72 - Dimmwert AB 30 → 100
Adaptation → Leuchte30FR LC72 - Lichtansteuerung HD AB 30 → always
Adaptation → Ambient lighting - Defaultwert Ambienteprofil Fussraum → 100%
Adaptation → Interior light; light configuration - Fussraumbeleuchtung → installed
Adaptation → Interior lighting; parameter - p_adaption_kundenwunsch_fussraum → 14
Adaptation → Interior lighting; parameter - p_helligkeit_max_fussraum → 100%
Adaptation → Interior lighting; parameter - p_helligkeit_HD_auf_zuendung_ein_fussraum → 126%
Adaptation → Interior lighting; parameter - p_helligkeit_HD_auf_zuendung_aus_fussraum → 127%
Adaptation → Interior lighting; parameter - p_helligkeit_dieseTuer_auf_zuendung_ein_fussraum → 70%
Adaptation → Interior lighting; parameter - p_helligkeit_andereTuer_auf_zuendung_ein_fussraum → 70%
Adaptation → Interior lighting; parameter - p_helligkeit_Fzg_geschlossen_zuendung_ein_fussraum → 126%
Adaptation → Interior lighting; parameter - p_helligkeit_dieseTuer_auf_zuendung_aus_fussraum → 70%
Adaptation → Interior lighting; parameter - p_helligkeit_andereTuer_auf_zuendung_aus_fussraum → 70%
Adaptation → Interior lighting; parameter - p_helligkeit_einausstieg_fussraum → 70%
Adaptation → Interior lighting; parameter - p_helligkeit_Fzg_geschlossen_zuendung_aus_fussraum → 70%
Adaptation → Interior lighting; parameter - p_helligkeit_Tueren_geschlossen_HD_auf_zuendung_aus_fussraum → 70%
Adaptation → Interior lighting; parameter - p_helligkeit_Tueren_geschlossen_HD_zu_zuendung_aus_fussraum → 70%
Adaptation → Interior lighting; parameter - p_helligkeit_Tueren_geschlossen_schluessel_ab_fussraum → 70%
Adaptation → Interior lighting; parameter - p_helligkeit_Fzg_geschlossen_schluessel_ab_fussraum → 70%
Module: 5F (Information electronics)
Adaptation → Car_Function_Adaptations_Gen2 - menu_display_ambient_illumination → activated
Adaptation → Car_Function_Adaptations_Gen2 - menu_display_ambient_illumination_over_threshold_high → activated
Buy #OBDeleven here (ref): mr-fix.info/redirect/obdeleven
More tweaks for VW #GolfMK7 here: ilovecarmods.com/volkswagen/go...
mr-fix.info/
Facebook: / mrfixpl
Instagram: / mrfixpl
Pinterest: / mrfixpl

Пікірлер: 132

@mrfixpl 10 ай бұрын

Need OBDeleven? 🎟 Get 10% OFF with code: MRFIX10 🛒 mr-fix.info/redirect/obdeleven

@wiesiekkaczmarek9591 2 жыл бұрын

Dołączam się do podziękowań za kolejny świetny tutorial. Lampki zamówiłem z podanego linka - wiązki super, nie trzeba było przedłużać a nawet te bez oplotu skracałem. Przewody dość grube, miedziane, końcówki pasowały jak trzeba. Natomiast lampki: te na przedzie były na wymiar zaś z tyłu nie wchodziły i trzeba było trochę powiększyć otwór na długość (jakieś 2 mm). Kodowanie, tu też był problem ponieważ linijki od 10 do 24 - nie udało mi się znaleźć takich pozycji (jak czytam komentarzach, inni też mieli z tym problemy). Mimo wszystko oświetlenie działa i w ustawieniach w radiu mogę regulować jasność oświetlenia. Tak więc super, jestem zadowolony z tej modyfikacji. Jeszcze raz wielkie dzięki.

@nadeemkhalifa4329 4 жыл бұрын

When are you planning to do part 2? I love your tutorials, very well explained but I don't want to attempt this install until you've shown the full guide for front and back! Hope you will do it soon

@Lupo116 2 жыл бұрын

Thank you so much for sharing, I just installed the lights in a Sportsvan with ease! Only problem were the missing holes under the front seats. 👍⚡💡

@ravi270783 4 жыл бұрын

Thanks for the video and the coding details provided., i had been scratching my head for almost 2 yrs now to get this working. The missing piece was the interior lighting parameters. Finally got this to work. Only issue was those adaptation changes did not work on my VCDS. But had to use the VCP Tool for the coding.

@tomasandreis1577 2 жыл бұрын

Hi, I probably have the same problem - my VCDS does not want to find (display) when encoding channels "interior lighting: parameter - p_adation and interior lighting: parameter - p_helligkeit". Can I ask for advice on how to solve this?

@carlosb68 4 жыл бұрын

Waiting for the interesting part 2

@mayekel74 4 жыл бұрын

No i pięknie :) Na filmiku tylko nie ma pokazane jak zdejmujesz klamkę od maski :) a o tym trzeba pamiętać. Czekam teraz na część 2 po stronie pasażera i przydała by się część 3 fotele z tyłu :D Good Job !

@wiesiekkaczmarek9591 2 жыл бұрын

kzfaq.info/get/bejne/hZ1nqtV5nK3dlnU.html

@carlosb68 4 жыл бұрын

I just retrofited in my golf 7.5. Thanks for this video. I see more clearly the pass of the wire. In my case the coding is more than others put in his mk7. In 7.5 is integrated in the ambient lights

@eliranferreira599 4 жыл бұрын

Friend, my golf is the mk7.5 comfortline. How can you pass all the complete coding? Thanks.

@ferranpixel9528 3 жыл бұрын

in my 2019 Touran i think i need the mk 7,5 coding, cause mk7 one doesn’t work. Can you share it please…?

@robbiezxc 2 жыл бұрын

@@eliranferreira599 hi did you find coding for golf 7.5

@jakubmadura4671 Жыл бұрын

Hi. Where i find coding for mk7.5?

@paulg2726 3 жыл бұрын

Thank you for the video 👍🏾

@mrfixpl 3 жыл бұрын

✌️

@matictomsic8621 Жыл бұрын

Thank you very much for your video and help. Every thing was good except when coding with OBDEleven on: Adaptation → Interior lighting; parameter - p_adaption_kundenwunsch_fussraum → 14, it doesnt accept value 14 it gives some kind of error so used 1 and every thing is working fine and also Adaptation → Ambient lighting - Defaultwert Ambienteprofil Fussraum → 100% i couldnt find it so i just left it and i works fine (i have golf 7). Thank you again for your instructions and time to help other peopel! BIG thumb up

@xhigplay Жыл бұрын

I'm also having this problem right now. Can you give a update on if you fixed it or still have this problem?

@umarwadee8026 2 жыл бұрын

Hello mr.fix, I’m trying to find the same product you have shown in the video but only for the front two seats, I don’t feel confident in doing the rears also, will I be able to use the 4 piece set given and just miss the two rear lights or will I need to get a set that has just the front two, I can’t seem to find the right one with correct wiring, is there anyway you can help me?

@mariosopranzetti4932 3 жыл бұрын

hello, listen but the coding that you put where it starts, adaptation, interior lighting, parameters .... I do not find them, among all the items from the drop-down menu, searched and searched, nothing. I do it with VCDS 20.4 .. can you help me? because on the on-board cb I was able to put the controls + and - for the intensity! but they don't act! thanks

@-JPS- Жыл бұрын

Hello, thanks for the help of your video. in the case of golf mk7.5 of 2017 is it the same coding? or change

@marcomicheli4174 2 жыл бұрын

Hi I have a golf 7.5, I have performed the coding but the adjustment for the footwell light does not appear on the menu

@nielsdamhuis2773 2 жыл бұрын

Is the install the same for an seat Ibiza SC 2016, i know there are models with footwell lighting installed from the factory

@gati54uri094 2 жыл бұрын

I've been coding for the footwell lights option on the infotainment but there's no reaction for the lightning intensity and off. Anyone have solved?? 🤔

@grigcris 2 жыл бұрын

Hello. I did everything as described by you(all the coding steps) but, in the multimedia system(mib 1 Discover Media 5G0 035 846 i do not hav the "Footwell light" option slider on the light menu. Is there something else to do? Many thanks.

@christiancagnucci1444 3 жыл бұрын

Ciao. Complimenti per il video sei bravissimo , Oltre che alla c3ntralina nel pin , potrei collegare il cavo positivo con un ruba corrente ai fusibili luce plafoniera abitacolo ? Onde evitare attivazioni vag ? Grazie mille

@airhogglider 3 жыл бұрын

Getting issues with the obdeleven coding. I get the error: "(13) Function cannot be performed, mess. length or format incorrect" When messing with: "Adaptation → Interior lighting; parameter" Half the coding is done here which is a problem. I also don't even have this menu in 5F- "Adaptation → Car_Function_Adaptations_Gen2" Everything is installed. I have 2door hatch and just used all four lights up front instead of putting the two in the seat of the car for the back row.

@athmo 8 ай бұрын

Hi, there is any coding that is possible turn on courtesy lights and footwell lights with doors closed? (When turn on all courtesy lights). Many thanks

@user-qh2ls4sc5e Жыл бұрын

Nice

@mariusrazvanmatei3878 2 жыл бұрын

Vsetko funguje jak ma kodovanie na 100% najlepsi navod .dakujem

@NP-re5ht 2 жыл бұрын

Very illustrative video, the only flaw is the fact that from how you can see in the video the lights you have mounted do not illuminate the footwell much for the rest Ok

@Luka-ov1hu 2 жыл бұрын

Does footwel light work in drive with this coding and if open door

@byLuDukiD 3 жыл бұрын

hey man, I'm thinking to do this to my car, but I dont I have the obdeleven to do the coding part but I'm going to buy one. there are 3 version of obdeleven the ultimate generation. Can I use the coding part with the obdeleven starter pack?

@mrfixpl 3 жыл бұрын

Get the PRO pack. And check my OBDeleven review to learn more.

@mariosopranzetti4932 4 жыл бұрын

hi, I started coding the procedure as you wrote in detail ... I managed with Vcds to codify only the first part, the long coding, terminal 72 enabling, and the coding for the display control module! ... part concerning the adjustment of the lights ... nn I was able to find the various wordings in the drop-down list .. it is very complicated and long. how can i solve? thank you

@JugurthaOurlissene 3 ай бұрын

Hi do you have find a solution to change code using VCDS. I have thé sale issue like you i cannot set all paramètre using Vcds ☹️

@SepulRise 2 жыл бұрын

Hi, how you remove the footwell plastic without remove hood latch release handle bracket? Thanks

@mrfixpl 2 жыл бұрын

I believe I did removed it. It fairly simple, but was not visible on video and I edited it out. Sorry for the confusion. You can check my video about installing aluminum pedals. i believe it's shown when installing the dead pedal.

@01arron 4 жыл бұрын

Waiting for Part two..!!

@mrfixpl 4 жыл бұрын

It's taking long, isn't it? Hope to move it forward this or next week.

@01arron 4 жыл бұрын

mr-fix it would be great to see the part 2 fella, I’m wanting to do the same sort of thing and this is helping a lot

@user-em7ew9tr3j Жыл бұрын

Hi! Thanks for the video, I made a foot light on my car. the problem is that block 9 does not support encoding, only through adaptations. I made adaptations as described by you, but the light is not on. Can you tell me how to do it?

@mrfixpl Жыл бұрын

Check my recent video about cupholder lights. Might help you a bit with troubleshooting this in your car.

@jonny621 4 ай бұрын

hi, do you think it can be installed in the passat b7 as well?

@ffdamasceno Жыл бұрын

Boa Noite Aplica-se no polo brasileiro plataforma MQB?

@pja687687 2 жыл бұрын

Can I fit these with a MIB1 head unit?

@Danidasanic 4 жыл бұрын

@mr-fix . Do you know how many leds each light have ? mine set has 1 smd led each light , something doesnt look right . I already coded and im waitting to see at night

@mrfixpl 4 жыл бұрын

I believe that OEM is using just one SMD LED. But you can go with standard light (with a W5W bulb) and replace it with LED of your choice.

@Danidasanic 4 жыл бұрын

@@mrfixpl I bought the whole set with led lights (AliExpress), thanks for all the coding .

@fedemaster3749 3 жыл бұрын

is it the same for Audi A5 b8?

@giwrgosathan1776 2 жыл бұрын

Did you ever install footwell on 2q bcm

@LoadmasterNLD 4 жыл бұрын

To get some more brightness when doors are closed, can I change the 70% in the adaptions to 100%?

@mrfixpl 4 жыл бұрын

You can try :)

@LoadmasterNLD 4 жыл бұрын

mr-fix One last question. What value do you have on “Adaptation → Interior lighting; parameter - p_adaption_kundenwunsch_fussraum → 14” ? It should be 14% but it only accepts “0.14”

@markom5321 Жыл бұрын

Hello Mr-Fix, I installed my lights and I am coding with OBDeleven. I have a 2019 sportwagen S. I need help with a couple coding issues I have. I can not change the long coding. When trying to execute changes I get messaged “function not available” Adaptation > Ambient Light - says “There are not items available for this option” p_adaption_kundenwunsch_fussraum>14 - says “Function cannot be performed, mess. length or formate incorrect” All other adaptations have been excepted by the vehicle. Currently the footwell lights only turn on when the door is open. Thank you for your help.

@markom5321 Жыл бұрын

Dragans comment on this video fixed my coding issue by just inputting 1 instead of 14 under adaptation_kundenwunsch_fussraum. Footwell lights working as supposed to😊

@paolo3959 3 жыл бұрын

Hi mr-fix, congratulations for the tutorial, I have a question, what is the purpose of enabling bits 7 and 3? Coding → Long Coding → Byte: 05 → Bit: 7 → enable Coding → Long Coding → Byte: 17 → Bit: 3 → enable

@mrfixpl 3 жыл бұрын

One of them enables footwell lights in general. The other one enables ambient background illumination in footwell. Some newer MK7s does not require coding at all, just adaptation changes. Coding is filled with 00. VW at some point switched to adaptations in BCM module.

@paolo3959 3 жыл бұрын

@@mrfixpl Hi mr-fix, is it correct that the following parameters are different? - p_helligkeit_HD_auf_zuendung_ein_fussraum -> 126% - p_helligkeit_HD_auf_zuendung_aus_fussraum -> 127% -> 126% ? - p_helligkeit_Fzg_geschlossen_zuendung_ein_fussraum -> 126% -> 70% ? - p_helligkeit_Fzg_geschlossen_zuendung_aus_fussraum -> 70%

@paolo3959 3 жыл бұрын

Hi mr-fix, what code did you use? - p_helligkeit_HD_auf_zuendung_ein_fussraum -> 126% - p_helligkeit_HD_auf_zuendung_aus_fussraum -> 127% -> 126% ? - p_helligkeit_Fzg_geschlossen_zuendung_ein_fussraum -> 126% -> 70% ? - p_helligkeit_Fzg_geschlossen_zuendung_aus_fussraum -> 70%

@salvatoredellacorte4428 3 жыл бұрын

in my golf mk 7.5 i can't activate ambient lighting-defaultwert ambientprofil fussraum-100%. does not open ambient lighting says that the system does not respond why? can you help me I can't get them to light up

@ferranpixel9528 3 жыл бұрын

Same thing to me on my 2019 Touran… I think we need specifical code

@360Soundwave 3 ай бұрын

Hi mr-fix i'v learned a lot from your videos thanks..I have install the wires for the first light under the dash to the 72 pin connector and the braun wire to the chassi just like in your video. I also code this with OBDeleven but nothing happens the light will not go one? Can you tell me why i have this problem?

@JugurthaOurlissene 3 ай бұрын

Hi do you resolve your issue i have the same problem

@user-gb6sn8cl4c 10 ай бұрын

Hello, I installed all the lighting for the legs, everything as in the video, only I installed other led lights from skoda. I made the adaptation, the lighting of the legs appeared in the menu, but the lights do not light up. Could it be due to non-original LED lights? car VW golf 7.5 2019

@JugurthaOurlissene 3 ай бұрын

I have the same issue, do you resolved the problem ?

@feg-ue9zg 4 жыл бұрын

I installed all 4 lights in my golf 7 2015 lounge, but after several attempts I had to code them to adjust them together with the ambient lights. Now I have seen your video and tried to replicate your own coding, with no success. I receive an error message (Incorrect message length or invalid format) when I try to change one of these parameters Adaptation → Interior lighting; parameter - p_[...], They are all at 0. Do you have an idea how it could be solved? Thanks

@mrfixpl 4 жыл бұрын

Please make sure that you have entered the security access code first. And there might be a timeout from when you enter the security access to the first parameter change, so if you don't make any change within on minute or so, the access code expires.

@feg-ue9zg 4 жыл бұрын

@@mrfixpl thanks for the reply, unfortunately it is not a problem of timeout or security code, but specific of this category of parameters (Interior lighting; parameter - ...) that in my case cannot be changed, no problem with others

@ravi270783 4 жыл бұрын

Same issue here for me., none of the parameters for interior lighting works for me with VCDS. get an error something like CAN Messages greater than 256 bits not supported. Wondering if other tools like VCP or VAS5054 can code this adaptations. Since all of this values as set to 0% ., footwell lights will not turn on.

@paolo3959 3 жыл бұрын

Hi mr-fix, I have a problem with follow code: p_adaption_kundenwunsch_fussraum -> 14 (Default 0.00) The value 14 is not accepted from system. The same value in bin 1110, is not accepted from system. Only value accepted from system is 0.14 Wicth value you have put? Anyway, I made all the adaptations and for code, p_adaption_kundenwunsch_fussraum I have used 0.14, but the menu "Footwell Lighting" on the infotainment display, is not visible. The Footwell Light are not connected yet, could be the cause? Thanks best regards

@paolo3959 3 жыл бұрын

I answer myself, the correct code is, p_adaption_kundenwunsch_fussraum -> 0.2 In my Golf 7.5 the new menù is in "Ambient Light" and allows for HMI dimming adjustment

@MultiMaxi1000 4 жыл бұрын

Did all the coding right but the light is still not switching on I’m just confused 🤷🏿‍♂️ any help please ?

@mrfixpl 4 жыл бұрын

Perform output test to confirm that the circuit works.

@mariosopranzetti4932 4 жыл бұрын

sorry but the difference between the connection to pin 72 of connector C or to pin 50 of connector B., what changes? Thank

@mrfixpl 4 жыл бұрын

BCM has 3 conenctors with 70+ pins on each. Only 35 (or so) of them are used to control lights and are programmable. And C72 is the pin used originally by VW when the car is equipped with footwell lights.

@ffdamasceno Жыл бұрын

No Golf 72 footwell. No polo 19 72 Luz portas.

@eliranferreira599 4 жыл бұрын

Friend, does this encoding fit the golf mk7.5 comfortline?

@mrfixpl 4 жыл бұрын

it should.

@useruseraa885 3 жыл бұрын

hi just retrofitted the footwell light on my golf 7.5 but i have a problem the light is very low even when i put the maximum brightness on the infotainment , when i change the brightness on LC72 AB dimwert from 100 to 127 the brightness is high but i can't dim it from the infotainment anymore , any have the solution to this?

@mrfixpl 3 жыл бұрын

If dimmwert is set above 100 it will fallback to default setting with max brightness, no fade effect and no controls. Set it to 100 and check the Adaptation → Channel: Interior lighting; parameter channels which are set to 70%

@useruseraa885 3 жыл бұрын

@@mrfixpl yes exactly i tried this just to make sur the footwell work well, because even when it's night we see it just a little bit even when i dim it on maximum Thanks i will check this adaptation

@useruseraa885 3 жыл бұрын

@@mrfixpl kzfaq.info/get/bejne/otxzqLtyyK3HcY0.html here a video of the led footwell

@fredjones5327 9 ай бұрын

Great video, quick question, can I follow this method for a 2018 VW Passat GT???

@mrfixpl 9 ай бұрын

I believe yes

@fredjones5327 9 ай бұрын

@@mrfixpl thank you I can’t wait to try!!

@fredjones5327 8 ай бұрын

@@mrfixplhello I was using your video to install these AliExpress foot well lights on my 18 Passat GT, the problem I’m having is the GT has 52 pin bcm plug I’m not sure where to plug in the light pin can you help??

@cihatisikli2083 3 жыл бұрын

Hello. I have built everything in the lamps work. the only thing I can't get is the brightness adjustment in my screen can someone help me?

@mrfixpl 3 жыл бұрын

Have you checked coding instruction in the description of this video?

@vwejjr Ай бұрын

Witam. Czy rozwiązałeś problem?

@Leon-pz5vx 4 жыл бұрын

hi its works for a seat leon 5f 2017 1.2 tsi? thx you

@mrfixpl 4 жыл бұрын

Should be the same for Leon 5F and Octavia 5E.

@tiagodadias 2 жыл бұрын

What BCM is installed? Or rather, where can I find the bcm's squematic? I have leon 5f (MQB) 2017 and rapid spaceback (pq25 platform) 2015

@furkankapt2616 3 жыл бұрын

Hi mr-fix. I can't change the brightness from the multimedia screen. What is the problem do you have any idea ?

@mrfixpl 3 жыл бұрын

No option on the screen or no reaction from the footwell lights?

@furkankapt2616 3 жыл бұрын

@@mrfixpl No reaction from footwell. Menü and slidebar is on the screen.

@Mvillalta87 3 жыл бұрын

@@furkankapt2616 Did you fix it?

@adamsiii4516 3 жыл бұрын

Hej Czy taka modyfikacja jest zależna od rodzaju sterownika komfortu?

@mrfixpl 3 жыл бұрын

Z tego co wiem, to wszystkie BCMy powinny to obsłużyć.

@ahmetbugraergun2217 3 жыл бұрын

İs this codding procedure same with vcds, do you know ?

@mrfixpl 3 жыл бұрын

Yes, the same. VCDS, OBDeleven and other diagnostic tools are just "terminals" that connect with the car to see what's available over there.

@ahmetbugraergun2217 3 жыл бұрын

@@mrfixpl You are describe very well what diagnostic tools to do, thank you, ı will continue to follow you

@wadimzaluski8500 2 жыл бұрын

Do the Set also fit for a touran II?

@mrfixpl 2 жыл бұрын

Wiring length might be different

@LoadmasterNLD 4 жыл бұрын

Can you please show how to guide the wiring to the passenger side? :)

@mrfixpl 4 жыл бұрын

Once I have it done in my MK7, I will post a video showing it. For now i can only ask you to subscribe and wait for the part 2. Can't tell when it's coming.

@LoadmasterNLD 4 жыл бұрын

mr-fix Will do, thanks for your helpful video’s! It’s very helpful for my Leon too. :)

@carlosb68 4 жыл бұрын

With a guided wire. Without unplugged nothing...

@isiWins 2 жыл бұрын

is it the same on the passat cc 2010?

@mrfixpl 2 жыл бұрын

2010 Passat CC can have the same type of lights but coding will be different for sure.

@annaspera3731 Жыл бұрын

Ciao, prima di tutto complimenti per i magnifici video che fai, ti scrivo perchè ho seguito le tue indicazioni alla lettera per il montaggio luci vano piedi nella mia golf7, è andato tutto bene tranne che quando provo ad inserire il valore 14 ( Adaptation → Interior lighting; parameter - p_adaption_kundenwunsch_fussraum → 14 ), mi viene fuori valore errato, potresti aiutarmi, grazie ancora e spero di ricevere tue notizie, ciao.

@eliranferreira599 4 жыл бұрын

Friend, these commands can I do in OBDeleven?

@mrfixpl 4 жыл бұрын

OBDeleven with PRO license.

@eliranferreira599 4 жыл бұрын

@@mrfixpl Amigo, você poderia me ajudar como configurar com o obdeleven pro pra a barra de ajuste do footwell light aparecer na multimédia?

@mrfixpl 4 жыл бұрын

Everything I did is in the description below this video.

@ferranpixel9528 3 жыл бұрын

@@eliranferreira599 Module: 5F (Information electronics) Adaptation → Car_Function_Adaptations_Gen2 - menu_display_ambient_illumination → activated Adaptation → Car_Function_Adaptations_Gen2 - menu_display_ambient_illumination_over_threshold_high → activated

@dragankraljevski7872 4 жыл бұрын

Hi and tnx for the video. I just finished install on front and rear footwell lights. Codinig was slightly different on my MK 7.5 comfortline: 1.No Ambient lighting in Adoptions on my car. (Adaptation → Ambient lighting - Defaultwert Ambienteprofil Fussraum → 100% ) 2.Adaptation → Interior lighting; parameter - p_adaption_kundenwunsch_fussraum → 14 - it would not accept value 14 or multiple other values that i tried randomly :) It accepted value 1. Everything works as it should. Brightness level is adjustable from infotainment unit. My kit is from CarSystems.eu - www.carsystems.eu/golf-7-5-lighting-parts-accessories,tag.html

@carlosb68 4 жыл бұрын

Hello. The footwell lights appears in the light menu? For me only appears in ambient light menu. I have a 7.5 facelift too

@eliranferreira599 4 жыл бұрын

@@carlosb68 Friend, my golf is the mk7.5 comfortline. How can you pass all the complete coding? Thanks.

@markom5321 Жыл бұрын

Thank you, Inputting 1 fixed my issue with coding the lights to the car!

@antonw8004 Жыл бұрын

Can you do the coding with obd11 ?

@mrfixpl Жыл бұрын

Sure!

@antonw8004 Жыл бұрын

@@mrfixpl where can I buy the harness from as they don’t sell them anymore on aliexpress need one that I can code with obd11

@antonw8004 Жыл бұрын

@@mrfixpl am going to buy a set of kufatec footwell light off eBay just wondering can I still copy ur coding ?

@ahmedmasafree1389 3 жыл бұрын

Hallo, i want pls the code

@mrfixpl 3 жыл бұрын

It's in the description or at www.ilovecarmods.com

@ahmedmasafree1389 3 жыл бұрын

Its A or B or C?

@mrfixpl 3 жыл бұрын

Plug C, pin 72.

@TheMikicaroll 4 жыл бұрын

Hello, I come to ask you because Isearched everywhere and watched a lot of tutorials but I didn’t find what I was looking for  Here is my problem : I have a Golf 7.5 with basic rear led lights (forums.vwvortex.com/showthread.php?8571473-North-America-gets-screwed-again-here-are-the-LED-lights-for-NA) I bought original MK7.5 dynamic rear lights, sold with wires (four wires). For now I plugged all normally without new adding wires, just cuted a little the plug connectors for them to make them compatible. What works ? - « general » light works - Exterior left and right trurn lights work (no dynamic) Problems/missing : - No exterior left and right rear turn lights - No back drive lilghts (onboard lights ON when problem detected : driving back) What say the install book : - Climping out all needed plastic - installing and connecting the « 4 wire harnet » between rear left and right lights and going to BCM - Code with ODIS My questions : - Am I obliged to code with ODIS, it’s a professionnalsofware… - If obliged to, where must I go to ask for this ? only offical garage VW ? - If I do all the work but not yet coding, what happen ? only lights onboard ? - Where can I find tutorials about clipping out wire bottom doors ? (rear door panel it’s ok) Sorry, it’s long, but I’m in the mess:/ please help me  PS : If you have some information about putting off then on an airbag seats of Golf 7.5… I take… Mathieu