VW injected quantity (IQ) adaptation

Рет қаралды 44,177

golf Wagen

Жыл бұрын

vw golf 4 1.9TDI etc.

Пікірлер: 38

@diagauto4689 Жыл бұрын

Hi. When the problem was in golf 4 .before 22 years.i was know this adaptation. Thanks pro

@yassinebachbache7626 11 ай бұрын

شكرا مسبقا على هاد المحتوى السؤال. ما اهمية هاته العملية وما دورها ؟

@gabor8440 Жыл бұрын

hy i have a problem i change the value all is ok but i go to the done go back everything ok but i shut down the vcds and automatic com back the factory value. i dont know why.

@abdullbasitosman5070 Жыл бұрын

in which case i can do changing the value،؟

@goranstevanovic5905 Жыл бұрын

Where do you find these login codes?

@_giuseppe_4249 3 ай бұрын

Is this procedure valid for Audi A3 1.9 2005?

@andoparn4395 11 ай бұрын

how to know what is my golf 4 login code ? for abdation

@supersaiyajin9029 Ай бұрын

Can you say me for 11mm pump? 1.9 asv 11mm, best iq and start of inj? Voltage?

@Lee-gr2sd 8 ай бұрын

Hey man. I tried to get it done on my VW MK5 Tdi 2.0 with a BKD Engine. When I type 01 on the Channel field, I shows me " Error: Group 001 Not Available ". Am I doing something wrong?

@manu64646464 7 ай бұрын

Same to me, don't know how to solve that

@bobirving6052 6 ай бұрын

This is for Mk4, not mk5

@manu64646464 6 ай бұрын

@@bobirving6052what is wrong, the version of the vcds program ?

@bobirving6052 6 ай бұрын

No. This is only for the old mk4 tdi. Like 1999 to 2004

@BenYokumFarzet 6 ай бұрын

Hi. I have a VW 1.9TDI 101hp PD, It shows around 11mg injection quantity, and as far as I understand its too high. Should I lower the value the way you do on the video or could there be another problem with the pump/injector etc. because I think my values are unusually high.

@malcolmyoung7866 6 ай бұрын

Did you use VCDS to get that info? We’re you using CH 01? If so you can adjust the IQ as shown on here. I’m not sure if there are factory details limits on this procedure but you can at least try. Remember to take a note of the original value before doing so that way you can measure the adjustments from your original setting and have a ‘start point. If things don’t work out you can reset the value to your start point so you at lease you know where you are etc.

@balajiparthasarathy9490 5 ай бұрын

You can use Hammer Mod method to bring it down to an acceptable range and set it to 4.2-4.4 mg/str using VCDS Adaptation method

@conservativeman3521 Жыл бұрын

Is the car running during your mod and is it better to have lower or higher value cause I see you saved from 2mg to 3mg per stroke... Thank you...

@tylerdurden223 Жыл бұрын

Near from 4mg per stroke

@conservativeman3521 Жыл бұрын

@@tylerdurden223 That's the combined quantity on all 4 cylinders?

@tylerdurden223 Жыл бұрын

@@conservativeman3521 No, it's the quantity per cylinder. Set it between 3-5 mg for a good motor response

@fernandoramalho3644 Жыл бұрын

O a 1.9 tdi 130pd avf what is the best IQ? Lower or higher for the best mpg?

@balajiparthasarathy9490 Жыл бұрын

4.4 mg/str is the best IQ for 1.9 TDI

@luis84_al 11 ай бұрын

@@balajiparthasarathy9490para un 2.0tdi blb cuál sería la mejor adaptación?

@bobirving6052 6 ай бұрын

Best for power or best for fuel economy?

@ahmedelhadidy5907 Жыл бұрын

Thank you for the valuable information and how do you do this in the car?

@ahmedelhadidy5907 Жыл бұрын

وتنفع مع اسكودا اوكتافيا A5 2007

@abudabidibibudi Жыл бұрын

i have mk4 1.9 tdi PD but i dont know for what i need to do this???? respect for the videos!!!!

@tylerdurden223 Жыл бұрын

Only for TDI VE

@kreshnikmorinaa Жыл бұрын

@@tylerdurden223 its that for my passat b7 2.0

@tylerdurden223 Жыл бұрын

@@kreshnikmorinaa Passat B7 have TDI CR (common rail). I saw an adaptation for CR injectors but it's not this.

@abdulbeany1894 Жыл бұрын

Hi can i do this on audi a4 2.0 tdi pd 2006

@hasanbasha2320 9 ай бұрын

أحتاج إلى هذه الأداة، أنا من الهند، هل يمكنك مساعدتي في الحصول عليها

@markokalk1830 4 ай бұрын

Aliexpress outil VCDS environ 30€ à installer sur un pc Windows

@hakanuzun Жыл бұрын

Hi mate. What is the purpose of this.?

@Altmetaldoktor Жыл бұрын

want to know this too please

@colin5064 10 ай бұрын

the guy thinks giving more fuel will produce more acceleration. However for more acceleration you also need to provide more air. One without the other is useless@@Altmetaldoktor

@bobirving6052 6 ай бұрын

The guy here is professional

@balajiparthasarathy9490 5 ай бұрын

Injection quantity depends on fuel temperature, rpm, load, smoke, injection duration, coolant temperature, and measured air flow. ECM tries to compensate for the deviation to certain extent by adjusting air fuel ratio, to maintain smooth idle. Setting the correct Injection Quantity is important for the optimum performance of the engine. Lean or Rich fuel mixture damages the engine and contributes to starting problem, misfire, hesitation, stalling, black smoke, over heating or not attaining operating temperature easily, engine vibration, poor performance, poor fuel economy, etc