Bro you did a kick ass instructional video. I was scared to attempt this on my mk4 gti but thanks to you and your videos I'm ready!!! Thanks My man!!!!! Nice job. 👊🏼👍🏼

Def looking forward to the 550 injectors video. Keep them coming man. My 1.8 thanks you 🙏

Very good video! I feel better about doing it now. Much thanks man!

Ok, you crack me up every video. you remind me of myself when working on the car AND trying to explain something at the same time. I forget words a lot when I'm concentrating. and those 'nipple's are generally called 'vacuum port' or 'vacuum nipple' :) GG Cuñado!

Love from the UK bro ❤❤❤👍 been meaning to do this for a while going to definitely do it now

Would you recommend this I love your videos you help so much just got a 1.8t gli 05 jetta love it

Muchas gracias por tus videos bro saludos

What is the vacuum breath canister for , there is idle problem while I remove the canister and seal the vacuum hose connect to it

hey friend. Yo tengo un audi a4 b6 2002 1.8 turbo y cuando el turbo empieza a empujar aire hacia el motor, el diverter valve se abre sin que el auto logre cargar mas boost, tu crees que no sirve el diverter valve

Thanks for the video dude I'm about to do this myself

Did you also delete the fuel detection pump with the charcoal canister in the back?

Nice vids man. I'm in the process of all these deletes plus coolant ball, power steering res and battery relocation. Would be back in the road soon. Can't wait for the turbo install 👍

This guy is good. Wish you were in my neighborhood

Great video thank you very much... the only thing that I don't quite understand is for the rigid tube of the mastervac braking assistance where I have to modify the circuit ....but I will watch the video several times

When you take out the EGR valve do you have to plug anything from those lines too? Or just the plate from urotuning?

Nice work

Brah I'm doing the same thing only to a 03 Passat. And I'm adding methanol to the tune. Same ECU I think stage two plus. Hey how is that tune running for you. I love your videos and thanks very educational and helpful. You the man !! Sweet ride ..

Still learning about DIY on my own mk4 1.8t... so I have to ask: Why is this important? What's the benefit of deleting the SAI? ...and upgrading the PCV valve and tubing? ... my SAI pump has a blown seal or something wrong with it. Car sounds noisy and smells bad (not the exhaust or muffler) from the engine compartment. I'm debating whether to fix or delete.

Thank you!

Where i can buy the conectors plugs

PCV is looking nasty so next before turbo aluminium flanges for water and pcv neck that part is well done by ecs or may eurotuner has ut as well so if you work on the pcv just do a catch can and I used the places for bolts on the block from combi valve and catch can is very stelty. Nice job.

Were do u get the kit for it.

Can you drop the delete kit link so we can all purchase it bro

What are the benifets of this delete? I have a 2001 turbo beetle. It's looks stock but gose fast I'm pushing 10 to 20 psi with a forge bov flowmster downpipe cold air intake. (With maf sensor.) Ngk spark plugs and adjusted Waistgate. Everything else is stock I want to get rid of the pancake "charge pipe" new intercooler oil catch can and floemastr delta 50. What else should I do.

After pulling the secondary air pump out what do you do with the sensor that’s connected to it

Thank you so so so so so so so so so so so so so much.

What did you do with the harness that connects to the secondary pump ?

2001 jetta ws 1.8 sirve y donde puedo conseguir la pieza

Were can I get all that stuff from

Good job swallow you know this 1.8 engine is a nightmare

So the pipe to the turbo is just blocked off to the wastegate????

Did you get check engine after taking out secondary air

Hello sQualo I just put in my car the same kit delate as you have on your car but now my car doesn't turn on what do you think can be the problem do you think can be the tunning...? hope you can answer my question as soon as possible thank you

Donde consigues el kit? De resistencias y tapones

that ECU that you show is it stage 2 and where did you order it from

Hello thank you for the video. One question durite 1/2 = MM for 1/8. 😅 I'm sorry I am speak French

나도하고싶어요 ㅠㅠㅠ 혼자선못하고 맡기고싶은데 해주는데가 없어요 ㅠㅠ!

Hi do you need any special tune to do this? My car already have a stage 2 tube..

Hola yo tengo un audi 1.8 turbo 2002. que pasaria si elimino la valvula 249 y la n75

Hey man, I was looking on the urotuning website and it said you need an oil catch can. Is this true? Because I don't have the extra $$$ laying around for it. Thanks

para que sirve el secundary air pump?

Amigo tienes que modificar la ecu afuerzas y dónde compraste el kit para quitar todas las mangueras y los conectores

Question how did the car run after you did deleted everything ???

Some say that the sai delete can only be done by remaping the ecu? That way the Code p0411 something doesen't Show up. Do you know something absolut that? Ore should the risistor on the air pump Do it?

where do I get these plugs to eliminate the error, the elimination of the solenoids?

Anyone know what resistors need to be used? on Minute 3:32

Where's the new videos

Good video i have question. You have link for buying all kit ??

where did you get that ECU? and cost

27 dollars for a piece of aluminum that you can buy on aliexpress for 3

I had a question I'm replacing my crankcase breather hose. As I remove the old one the oil ring fell into the engine ? what can I do?

Are you on instagram?????

Weight reduction

Did you gain at least 5hp

is not a allen key, is torks keys

Bro where are u from ? Could u help me if u live in Denver I’ll pay u hha

Where did you get the kit from ?

Who did the tune?

Did you need to end up installing a catch can with this?

Hi you speark spanish? What is the objetive of that job? What more better?

2:31.... THESE 2 BOLTS..... 1.... 2... AND 3 HAHAHAHAHA!!!!!!!!

Please, someone can tell me which is the N112 WIRING COLOURS?

Liked and subs!

@2:42 dude there’s an Allen bolt imbedded into your engine block 😂

u can’t pass smog with this right

I need a guy in Tijuana to do this job, anyone?

Literally no power benefits. All it does is throw up engine management codes. Dont recommend doing this.

I did it on my 337 with full Apr build I did the full sai delete it was easy

Just wish there was a software delete for the secondary air code