Either the position of the knife edge or the mass hangaer should be kept constant during the experiment , why varying both at the same time?
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Yes this is known. That's a very good initive, you can try that while practicing, this is a run through experiment. Procedures given by the question should be followed anyways.
@chessplayerking Жыл бұрын
My teacher said that we should not start the vertical graph from the end if not marks will reduce
@Karel_alpha11 ай бұрын
Pls sir is ther a way i can reach you
@clementabraham39042 жыл бұрын
Thank you for this, can we get an explanation of Question 2. The one with standard masses, and source of heating
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Anticipate for that
@movieshub20612 жыл бұрын
@@TheLogicTutorhow did you gey 80 - 20
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 That's is the change in vertical axis.
@kareemteniola3634 Жыл бұрын
Sir I have a question, were you changing the centre of gravity to see where the other masses balances
@TheLogicTutor Жыл бұрын
Yes the position of the knife edge is varied in that experiment
@GospelBlast2 жыл бұрын
The video is great but blurry. Try uploading 720p resolution of its version. That's will be super great
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Video is 720p, network maybe bad sometimes.
@GospelBlast2 жыл бұрын
@@TheLogicTutor Go to settings, click on video quality and select "Advanced". Check for 720p to comfirm whether it's there. There's only 480p max!!! Anyways, the video is really invaluable to me
@oyinfatoyinbo53858 ай бұрын
Dear evening sir , for the slope in clip 36:32 can we just choose a random place where the slope has to be or there is a specific location for the slope.❤
@TheLogicTutor8 ай бұрын
You can take the slope from any point.
@abdullahilawalumar80402 жыл бұрын
Wonderful. But what about question 2. It looks like relative density OR proving of Archimedes principle
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Yeah It's density related
@jamesamara8295 Жыл бұрын
Please explain on light using bray box
@TheLogicTutor Жыл бұрын
Thanks for the comment 👍 I have done a video on that in the past. Use the link below to watch 👇 kzfaq.info/get/bejne/pLqejNuJksrem6M.html
@EmerieVlogs2 жыл бұрын
Good day sir Thank u sir for this helpful video But I have question Is this the actual question or a likely question?
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Likely question
@TotalDerrick2 жыл бұрын
Victoryyyy
@chibuikeonwuamaegbu36552 жыл бұрын
Thanks for the experiment. Please, recheck the unit of the slope; it seems incorrect.
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Let's visit and correct that. Unit supposed to be gcm i.e g/1/cm = gcm
@TotalDerrick2 жыл бұрын
But why did u start the the Xaxis on 10.00 isn’t it meant to start from 0.00?
@TheLogicTutor2 жыл бұрын
Yes start from origin👍
@zillanosas3795 Жыл бұрын
Why is it 10cm away from the edge
@TheLogicTutor Жыл бұрын
It's according to instruction from the question.
@alkanettutorials2 жыл бұрын
Thanks for the video. The explanation is really great. Is there a way I can communicate with you?
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Yes sure !
@TheLogicTutor2 жыл бұрын
I would not want to drop my contact here. But Try the facebook page "The Logic Tutor" I will send my whatsapp number to you through facebook.
@alkanettutorials2 жыл бұрын
Alright boss Thanks a bunch.
@cosmosmbaike86102 жыл бұрын
The unit of the slope is wrong; check pls. The correct unit is gcm
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍. Yes, it was a mistake and has been corrected in a particular comment.
@angeladare58422 жыл бұрын
Please how did you get the 0.015 as the scale for each box?
@TheLogicTutor2 жыл бұрын
Divide the unit scale by 10
@uloakuduru14802 жыл бұрын
Why didn't you start from the origin
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 You start from origin
@findyourmotivation8022 жыл бұрын
What year please?
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Idea from PC 2013 but totally reframed
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Idea gotten from PC 2013 but totally reframed
@caraaustin95812 жыл бұрын
What about string ?
@TheLogicTutor2 жыл бұрын
It was used in the experiment
@uchagrace12492 жыл бұрын
Was the spring used in place of the thread?
@TheLogicTutor2 жыл бұрын
Not a spring the instructions is string. You can get a string by twisting or doubling a thread.
@uchagrace12492 жыл бұрын
@@TheLogicTutor pls. Where exactly?
@TheLogicTutor2 жыл бұрын
Check the video, the weight hanger was hung on the string.
@SarahSesay-sk5jq2 ай бұрын
Thank you sir may the Lord favour u and your family members for in Jesus might name I pray amen 🙏🙏🙏🙏
@lopesekiel12 жыл бұрын
Sir point of correct "during the last reading of mass100g;you said 63.1-56.5=7.6 Instead of 6.6
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Thanks for observing, That Should be corrected in the table. If possibly you wanted to plot a graph with it for practice.
@lopesekiel12 жыл бұрын
@@TheLogicTutor Aiit sir
@solomanosiris23952 жыл бұрын
promosm 😭
@TheLogicTutor2 жыл бұрын
Thanks for the comment 👍 Did'nt get you pls
@kareemteniola3634 Жыл бұрын
Sir I have a question, were you changing the centre of gravity to see where the other masses balances
@SReN.tinkrr Жыл бұрын
yh the center of gravity will change and the weight will be palced at different points
@Karel_alpha11 ай бұрын
Pls sir is ther a way i can reach you
@TheLogicTutor11 ай бұрын
Yeah. Chat up on whatsapp 09024138251
@Karel_alpha11 ай бұрын
@@TheLogicTutor please sir the number isn't on WhatsApp