Wagner Furno 750 Heat Gun Unboxing & Testing

Рет қаралды 12,152

4 жыл бұрын

I picked up the Wagner Furno 750 Heat Gun to assist in drying spackle. I have lots of spackling to do and want to speed up dry time. I choose this heat gun due to having many temperature settings. I unbox the Wagner Furno Heat Gun and notice a cut out on top of the casing. The Furno 750 heat gun very lightweight preventing fatigue while using. Therefore I plug in the Wagner 750 and start playing with the controls. The controls adjust fan speed, temp setting, and also the power button. The plug needs to snap in place. Also, I decided to test it out, drying some wet spackle.
I will follow up with a review after using this tool for some time.

Пікірлер: 25

@randyzeroth4098 4 ай бұрын

Thank you for taking the time to make this video. I appreciate it. Keep up the good work.

@More350Power 4 жыл бұрын

I will be looking for the review video. The only thing I question is how long will the electronics hold up on it...... I have had very good luck using patching plaster..... plaster of paris to be exact. Dried fast, wet sanded, painted all in an afternoon, Had to fill in holes from a previous thermostat so I could move it out of the kitchen. Odd place for a thermostat....go figure lol

@anon7219 2 жыл бұрын

nice video... not sure why you'd want a trigger on a heat gun, especially if you're using it a lot - having to hold down a trigger would be a pain. Also, I think the back is shaped that way mainly so it sits firmly and safely on any hard surface, without burning anything.

@12vLife 4 жыл бұрын

Think this can heat a 1/4" piece of aluminum to 800F for brazing stick welding?

@4eightyvolt 4 жыл бұрын

Why didnt you use the wide slot nozzle adapter? Its purpose is for what youre trying to do.

@benjagomez4824 3 жыл бұрын

Can you Change it from F° to c° ?

@Keddemann 3 жыл бұрын

The Furno 500 has lit up display but no storage box.

@floobertuber 3 жыл бұрын

The Furno 700 doesn't have a box either. The 550 and 750 kits include more accessories and the case.

@eliascruz9757 3 жыл бұрын

Cruz ✝️. I got one an it works hot 🥵.... super heat sweet. I am not going to get a wall to heat I have a big f... fan....

@Max-kn9yi 2 жыл бұрын

Why wouldn't you use the tips?

@lalani888blue 2 жыл бұрын

Bought one yesterday ~ Used it for approximately 2 minutes...Turned it off and it started 'smoking'! Is that normal??? 🤔

@dakotaroberts1335 Жыл бұрын

Yea its new they burn off the chemicals from being new only lasts bout 2-5 mins

@thundercatkingleono5723 3 жыл бұрын

How do you remove the bottom cable in order to storage it back in the box?

@billstools5244 3 жыл бұрын

I keep the cable on and still get it back into the casing. It was tough to get off so I just folded the cable to fit inside the box yet left it connected.

@floobertuber 3 жыл бұрын

I have the Furno 500 (very similar gun) and its manual states that the power cord is packed separately, but once it's attached (by you), it is meant to be a permanent cord. It's true that there is a small catch-tab you can manipulate to remove the cord, but then you risk breaking off the tab and ruining your power cord. Removal was not intended by Wagner. By the way, the Furno manuals are available on the Wagner site, if anybody wants to review them before buying one.

@thundercatkingleono5723 3 жыл бұрын

@@floobertuber thanks for the confirmation

@floobertuber 3 жыл бұрын

@@thundercatkingleono5723 Happy to help! 👍 One other thing I should mention: As "Bill's Tools" said about his Furno 700, I bought the 550 kit, and can confirm that the Furno 500 with cord attached also fits into the case. Quite easily, in fact. I assume the inexpensive Furno 300 would fit as well, because Wagner's accessories page refers to the case simply as "Storage Case for Furno," and doesn't specify what guns it fits. See: www.wagnerspraytech.com/parts-and-accessories/heat-guns/ Unfortunately, they want a rather-crazy $14.99 for case separately, plus ANOTHER $11.20 for their cheapest USPS shipping option. For the extra $26+, you might as well just upgrade to the 550 or 750 kit, and get a fancier gun and all the nozzle adapters too, essentially for free. Cool Down Mode Bonus Tip: On the 500 and 700, if you don't want to wait for cool down mode to finish cooling, you can override it. It's done by holding down the power button for 3 seconds, which shuts the gun off immediately.

@thundercatkingleono5723 3 жыл бұрын

@@floobertuber Absolutely, totally agree. I purchased the Furno 500 and appreciate your feedback and knowledge. Thanks again good Sir!