here it is everyone! The Walk around video of THE ENEMY!
Пікірлер: 56
@2fast655 жыл бұрын
Thats a bad ass ride i hope you bought it have a great day be safe all.
@DUNEATV5 жыл бұрын
That’s a badass rig...
@SXSVideos5 жыл бұрын
Sure thing man!! My favorite rig!
@Gonecheenin4 жыл бұрын
No doubt. I'm hoping someone builds an aftermarket chassis for the YXZ someday - would probably even be cheaper than trying to fix all the weak points in my 2016's OEM frame for the type of East coast riding I do.
@josephlejeune19675 жыл бұрын
That thing is sick!
@SXSVideos5 жыл бұрын
For sure man!!
@SXSAction5 жыл бұрын
I wonder whos gana get it. And uhh lol good video Zach
@SXSVideos5 жыл бұрын
Gonna be a lucky fella!!
@scottsizemore1821 Жыл бұрын
Just curious what gen gdp portal were you running? Do you think they will ever make a portal that can handle the type of abuse you would give it? Thanks
@ulisesrangel31654 жыл бұрын
Que motor tiene amigo
@jarredmeadows81604 жыл бұрын
Awesome buggy. Think I’m going to give it a shot at building one. Couple questions.... Is that fuel cell just a shop made cell with the factory internals swapped to it? Did you use the factory wiring harness and just reroute as needed? And drive shaft , is it a factory length or a custom shaft built for the wheel base you chose ? I built a tube truck chassis for mine but I used the factory base for my blueprint..... after seeing this I’m hooked and ready to build again ....
@SXSVideos4 жыл бұрын
Hey brother, thanks for checking out the video. The fuel cell can be ordered. I'll check with the builder and ask him where he bought it. Or you can find a fab shop and they can weld one as well. Everything else is factory with the fuel cell except some fuel fittings u can buy at a racing shop. We went to SCP. It is the factory wiring harness. I used my Bounty series driveshaft from @superatv and had it extended from a custom driveshaft shop called PEM in St. Clair Missouri. My wheel base is 102". (Stock is 90"). Good luck on your build!! I hope this answered your question! Check us out and SUBSCRIBE man! We all have these in our group and wheel the heck out of them. Also, check us out on Facebook at SXS Of Missouri. That is our Facebook group. 😎😎
@jarredmeadows81604 жыл бұрын
@@SXSVideos Thanks for the reply! Appreciate you taking the time to answer and that was what I was looking for. I’ll keep you updated. I’m sure I’ll have a couple more questions as I go. The videos are awesome man. Keep it up !
@SXSVideos4 жыл бұрын
You're welcome man and I appreciate that! We are trying our best to get footage out during this time. On top of building a house the country is experiencing a pandemic lol! Feel free to hit me up anytime. If I cannot answer the question I'll at least point you in the right direction. I'm excited to see your build!
@rockytopriders87055 жыл бұрын
Zack you need that thing!!
@SXSVideos5 жыл бұрын
I'd love to have it!
@rockytopriders87055 жыл бұрын
@@SXSVideos who wouldnt lol,he builds super nice machines,when do we get to see his new one??
@SXSVideos5 жыл бұрын
@@rockytopriders8705 he has to get it built first. Prolly a few months.
@rockytopriders87055 жыл бұрын
@@SXSVideos oh lol,figured he built one already,cant wait to see what he comes up with to top The Enemy!!!
@SXSVideos5 жыл бұрын
@@rockytopriders8705 me too! It's going to be hard to top the enemy!
@cracksrubi5 жыл бұрын
Better question is what will replace it
@SXSVideos5 жыл бұрын
Yes! That is what I'm more excited about! The builder is being pretty quiet about his new build. It'll only be a few months before he gets another one together.
@justinfee8195 жыл бұрын
Wow that's quite a machine I was hoping you would do this it is impressive I assume you have rode in it so what's it like compared to the RZR?
@SXSVideos5 жыл бұрын
It's night and day difference man. If you like to ride rough and kill hills this is the way to go.
@jaybajan5 жыл бұрын
how much does something like this cost
@SXSVideos5 жыл бұрын
get ahold of Hawk Engineering bud
@dakotawilkins24744 жыл бұрын
What size tube is that frame out of?
@SXSVideos4 жыл бұрын
.95 wall DOM
@ironmindae64573 жыл бұрын
What trailing arms did he use?
@SXSVideos3 жыл бұрын
SCM I believe
@user-pc3ed6se8s8 ай бұрын
How much
@kolohelau11853 жыл бұрын
Killer ,
@SXSVideos3 жыл бұрын
Thanks! I actually own this beast now.
@atvextremist4 жыл бұрын
What muffler is that?
@SXSVideos4 жыл бұрын
it's custom from Wilson Motorsports.
@greenesweldingfabricationl99995 жыл бұрын
i want a chassis like that..who do I talk to..
@SXSVideos5 жыл бұрын
Get ahold of Wilson Motorsports and ask for Clayton Wilson. You can find him on Facebook as well.
@greenesweldingfabricationl99995 жыл бұрын
@@SXSVideos I'm in Florida and of course people down here just play in the mudd and no need for full chassis...BUT I'm starting to get calls for them because they are starting to race more..so I own a fab shop but I haven't built a full chassis yet only cages for drag cars..I've been talking with justin at rzr sharp but not getting any answers..I'm looking for shop to buy chassis from and one that knows what they are doing..so I'll get ahold of him..thanks and great videos man...I'll be at windrock in August for the races..
@dougs23134 жыл бұрын
interested in chassis too
@dougs23134 жыл бұрын
and prices
@SXSVideos4 жыл бұрын
Wilson Motorsports is your go to for details! Tell Clayton we sent ya from our KZfaq channel!
@grandprismatic4 жыл бұрын
F ing sikk build
@SXSVideos4 жыл бұрын
Definitely is! I'll actually be in next year with a few changes.
@jeepincrawl53493 жыл бұрын
Who could build a tubed chassis for can am
@SXSVideos3 жыл бұрын
I wish I knew brother. I only know of a few out there. The only guys I know that have them are the Wolf Brothers thay race. U ever hear of Paul Wolf?
@jeepincrawl53493 жыл бұрын
@@SXSVideos yea I called him and talked to him he just builds for his self
@SXSVideos3 жыл бұрын
@@jeepincrawl5349 he's the only guy I'm aware of. I would ask around in the X3 groups on Facebook. It's too bad the X3 frame is so dang weak. It's the perfect wheelbase and does great hill killing. I would look into CT Race Works. I'm pretty sure they are the leader in frame stiffeners.
@jeepincrawl53493 жыл бұрын
@@SXSVideos yea that’s what I’m worried about thank u buddy for the information.
@SXSVideos3 жыл бұрын
No problem man. Good luck to ya!
@user-mp6fj2jw1t4 жыл бұрын
Американец привет, подари такие шины, на мой багги.
@kurtiscurtis81024 жыл бұрын
Nice buggy but why you do out of breath just standing around big dog slow down take a second to get your breath
@SXSVideos4 жыл бұрын
Thanks lol. We'll try to improve that on the next video