Walksnail Avatar Goggle Upgrades

No video

Walksnail Avatar Goggle Upgrades

Рет қаралды 9,981

Күн бұрын

This video presents some upgrades for the Caddx Walsnail/fatshark avatar goggles.
Items presented in the video can be found at:
Walksnail goggles: nordfpv.com/co...
Goggle protector:
nordfpv.com/co...
Printables STL file: www.printables...
TrueRC patch antennas for Walksnail: nordfpv.com/co...
TrueRC Stubbies antennas: nordfpv.com/pr...
Goggle Straps: nordfpv.com/pr...
Echine 18650 battery case: tiny.cc/i4ymuz
Goggle foam: nordfpv.com/pr...

Пікірлер: 61

@MajorGeneralHavoc Жыл бұрын

thx man! this was super helpful. I went ahead and ordered a cover + strap + foam from your shop! Appreciate it a lot man!

@NordFPV Жыл бұрын

Hey. Thank you! I have sent your order already. Thanks for watching!

@MajorGeneralHavoc Жыл бұрын

@@NordFPV I appreciate you Nord! It's cool to hear some positive news on the walksnail system. I enjoy it and hope it will only keep getting better.

@glidesfpv Жыл бұрын

Just ordered one of the bundles they have on sale. Thanks for the STL! Got the X2-air MK II patch antennas on the way, too! The top right (when you have them on) is a tx and rx antenna. So what people do is open the goggles up, flip the top right and front right u.fl connectors. This way you have the patch antenna on the tx/rx spot. You really only need to do this for super long range.

@NordFPV Жыл бұрын

Hi Glides, yes, I've been flying with the antennas like this and all seems good. I don't go further than 2Km. I hope you enjoy your system when you get it! It's so much fun.

@OneManUnmanned Жыл бұрын

I’ve used HONSVR for my prescription, flying DJI products..You might want to contact them. I did mention it to them a while ago, but they are assessing the demand for Walksnail and HDZ goggles.

@NordFPV Жыл бұрын

Great!, I just message them, let's see. If anyone else read this, and is interested on them, please contact them too.

@JohnCuppi Жыл бұрын

Nice video on upgrades. Very well presented. I love my NordFPV strap. Great quality and been fantastic so far.

@NordFPV Жыл бұрын

Thanks John!

@davidtskhakaya280 8 ай бұрын

Thank you very much for your very useful review.

@NordFPV 8 ай бұрын

You are welcome David, and thanks for watching!

@sekharsurya4922 Жыл бұрын

U deserve millions of views and subscribers For such great content .👏 Very clear and clean explanation. 👌

@NordFPV Жыл бұрын

Hi Sekhar, So nice of you! Thank you for watching.

@MichaelRogersJesusrules Жыл бұрын

Excellent video,everything i need or already have, great upgrades! subbed thumbs up,Peace!

@NordFPV Жыл бұрын

Thanks for the sub!

@jukkaovaskainen Жыл бұрын

Nice upgrades 👍

@NordFPV Жыл бұрын

Thanks 👍 Jukka!

@awsstvawsstv2809 Жыл бұрын

Very good thanks for sharing. One question why does the goggle get black pixels? I didn’t understand that part

@NordFPV Жыл бұрын

True, I didn't explain it: If the sun hits the screen, if you leave the goggles unattended, your lenses act as a magnifier, and they can burn the screen inside. That's why you should never leave your goggles without any protection where sun find them, or the reason why you want to have a lens protector as the one I have here. Sun+Goggles=burned pixels

@fernandonavarro4905 Жыл бұрын

Nice Video!. Could you please put the link for the power bank and the necessary cable for the goggle charger?

@NordFPV Жыл бұрын

Hola Fernando. I was thinking about it, but I bought it in Amazon Sweden, so a link from there won't help you much. Anyway, here's the link: www.amazon.se/gp/product/B07YPS5JC5/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

@ingolfhegsvold5672 Жыл бұрын

@@NordFPV Is this powerbank working with the googles? This is 5V output right? And the googles need 6V-25.2V

@NordFPV Жыл бұрын

@@ingolfhegsvold5672 the power bank is much more than 5v. That’s the whole thing about this video. When you select a USB-C PD you can get up to 20v. And in the case of barrel connector then is the cable the one limiting how much power you provide.

@ingolfhegsvold5672 Жыл бұрын

@@NordFPV Thank you!! That is good news. I didn't think that would work. I'll try this out then.

@StickJockeyFPV Жыл бұрын

I got the Recon HD goggles and using them feels like I'm in the back of a movie theatre. The screen feels like it's about 6 inches away from my eyes. What is the experience with the Dominators? How much would it feel like I am more to the front of the movie theatre if any?

@NordFPV Жыл бұрын

It’s been a long time since I used recon style goggles, but if I remember correctly, with something like the dominator you will feel even more immersed in the experience.

@Ricpow80AkaNagamooto 4 ай бұрын

Which lens protector is the newer version? On 'printables' website the one with the more recent date (December 23) is bigger and the older (July 23) is smaller... Which do you recommend as best?

@NordFPV 4 ай бұрын

The smaller is the best one in my opinion. Remember to use TPU to print it, 95A or 98A preferably.

@Ricpow80AkaNagamooto 4 ай бұрын

@@NordFPV Definitely! Thank you very much for confirming.

@EdturdEnfart Жыл бұрын

Could I use the stock Dji goggle antennas on the fatshark dominator avatar hd goggles

@NordFPV Жыл бұрын

Yes you can Golden FPV. As long as you haven’t change the original antennas on the drone. The important part is the polarization, and the connector on the antennas. LHCP is what’s originally in walksnail and DJI

@EdturdEnfart Жыл бұрын

@@NordFPV thank you very much I appreciate it

@EdturdEnfart Жыл бұрын

How about the Dji battery for it?

@NordFPV Жыл бұрын

Sure. You can use that if you have it.

@quadsmack Жыл бұрын

Since this video you have listed on your site a foam specifically for the Avatar - which do you find better, the DJI one or the specific Avatar one?

@NordFPV Жыл бұрын

The specific for avata. Soooo much better

@quadsmack Жыл бұрын

@@NordFPV Thanks for the quick reply! Subbed and will be shopping NordFPV shortly!

@NordFPV Жыл бұрын

@@quadsmack Thank you!

@MichaelRogersJesusrules Жыл бұрын

oh i forgot, does the stl work with hdzero goggles? Thank you! oh and the foam, im sry i have a lott of health problems worst kinda is short term mmem loss. God bless

@NordFPV Жыл бұрын

I don’t have a HDZero googles, so I don’t know. Sorry

@cowboybebop521 8 ай бұрын

will the v1 v2 foam for the walksnail goggles work on the new goggles x?

@NordFPV 8 ай бұрын

Actually we found out that the DJI G2 foam fits perfectly the goggles X and therefore you see in the website it’s offered for both goggles

@dondupuis4007 Жыл бұрын

Tried to download your style 3d lens protector and the site says you have no flesh there?

@NordFPV Жыл бұрын

Can you give me more information of what are you trying to do? Which link are you using?

@dondupuis4007 Жыл бұрын

@@NordFPV Got the link, I went back later and it worked, thank you for publishing the 3 D design to protect walksnail goggle lens.

@NordFPV Жыл бұрын

Not a problem!@@dondupuis4007

@peppedetto Жыл бұрын

hi I have an advice about astigmatism and walksnail goggles, I am astigmatic too and I understand your problem because I also use the walksnail system, I'll explain, a few years ago I bought the old analog goggles eachine ev300D and they came with the package two small supports for external optical lenses to be mounted on the goggle lenses, so you could do the same, you print the supports in 3D and have your optician make the lenses to apply, it may seem strange to you but I think it is the only solution, said so if you draw these mounts in 3d to suit walksnail goggles please share the stl file so i can print one for my goggles! (I don't know how to draw in 3d, I only know how to print), sorry for the long message and for the incorrect grammar, I'm Italian :D

@NordFPV Жыл бұрын

Ciao Pegh, yes, that's what I meant by "I'm thinking to do my own design". I've heard this same thing from someone that did some other goggles in the past, and despite I can draw a bit in CAD programs, I'm not very good at it, and something that may take an hour for someone else may take 5 for me, therefore I've been waiting to see if someone else does it before me :D. But I may give it a try soon if no one comes with a design soon. Thanks for the comment, and hope we find a solution too.

@excursionsentier4514 Жыл бұрын

Ok but give us the link for your foam for the walksnail googles please. I have eyelashes eyes on the googles, need to clean each time the lens...😑 Thank you

@NordFPV Жыл бұрын

Hi Excursion. The link it's in the description of the video.

@TriTon_Hopefully Жыл бұрын

Will you have a sale for The goggles on black friday or cyber monday, cause im really intrested in buying The walksnail goggles if it goes down to around 6000kr.

@NordFPV Жыл бұрын

No 😂😜

@M-H433 Жыл бұрын

Lens cover= piece of sponge foam cut out

@NordFPV Жыл бұрын

That works too, but when you have a 3D printer you find every excuse to use it 😂😎🤣

@Burn377 Жыл бұрын

You don't ship to Australia? 😭

@NordFPV Жыл бұрын

send me an email to info@nordfpv.com and we can see what we can do. I have shipped to New Zeeland and Australia a few times.

@Burn377 Жыл бұрын

@@NordFPV Sorry I didn't get a notification for this message, I did end up finding the X air antennas in Australia I just had to buy 1 from 2 different suppliers due to stock shortages.

@NordFPV Жыл бұрын

@@Burn377 Good stuff! those are great antennas, I'm sure you will be happy with them.