Wall Forming 1

Рет қаралды 206,397

Күн бұрын

Ed Stanley
Hardware Used in Concrete Wall Forming
This video was for Ed to show just the hardware used for the wall forming project. If he makes another video I'll have him show how he does his projects from start to finish.

Пікірлер: 146

@guyquinton2413 Жыл бұрын

Better than any apprenticeship instructor I had

@johnanderson8096 4 жыл бұрын

That was nothing short of OUTSTANDING!!! The one thumbs down must be from one of Ed's competitors!!!???

@bigstud6655 4 жыл бұрын

Ed I’ve wanted to know exactly how to form walls the traditional method for several years. You explained this exceptionally well. Your experience and communicative skills are admirable. Thanks so much for explaining this in detail.

@MichaelYoung-iz5rn 10 ай бұрын

Im. Forming 6" wall 40" tall it being poured im 35 'at a time with 2 coners. On a 8"×8 foundations. Also 133 feet long. What bid would thT be.

@georgesanchez9971 4 жыл бұрын

EXCELLENT VIDEO. This is the best video I have seen. Thank you for taking the time to make this education video.

@dluxdiy Жыл бұрын

Most informative video I have found so far on explaining foundation wall framing. Thank you for making this video!

@woodyahh2110 4 жыл бұрын

This is my goto video for new carpenter's in the field The kind of perfection that concrete demands Please make more

@uticatechclub923 9 ай бұрын

Very informative - thank you! Your technique of repeating HW names makes all of us memorizing them by the end of the video :)

@ashelygamboa7066 4 жыл бұрын

Ed, that was one of the best tutorials I've watched. You have a very clear and concise delivery which makes is easy to follow and understand the content. Thanks for making this available.

@paoemantega8793 10 ай бұрын

A great presentation Mr Stanley, thankyou very much.

@mega2034 Жыл бұрын

After looking and looking and looking, finally I came across this video. Thank you so much. I will be busy this summer building a 6’ tall by 10’ long and 8” wide retaining wall. Thanks again

@chrisdelligatti4409 3 жыл бұрын

Mr. Stanley, Thank you for a great instructional video. I have been interested in learning how to properly build concrete forms. I look forward to watching your future videos about construction of concrete forms. I appreciate your sharing knowledge of construction in this video.

@dougsherman1562 4 жыл бұрын

Awesome job Ed, thank you. This is valuable information for all of us DIY guys pouring concrete on the weekends. Union Strong!

@farkled 3 жыл бұрын

This is one of the best videos I've seen on this topic. We're building an off-grid house on our property in Mexico, and I've been doing research on how to build these forms. Much appreciated!

@rickygaytan6698 3 жыл бұрын

Great video. You were really informative and went through not only the proper names but what the hardware is known as in the field. Thanks for the upload.

@stevenalvarado1202 Жыл бұрын

Researching Symons panels and came across this and was rather impressed by how well this was done. I learned about alternative means which will assist greatly in my research.

@ChrissGEE 3 жыл бұрын

You’re the best Ed. Much love and respect ✊🏻

@hamiltoncooper3603 3 жыл бұрын

Thank you Ed Stanley.

@aguy7039 3 жыл бұрын

Agreed, THE BEST VIDEO explaining this concept. What a great communicator! You knocked this out of the park, it’s cleared up every question I had in this type of forming.

@archdynamics 2 жыл бұрын

Excellent tutorial, Ed. Thank you for taking the time to explain so clearly and thoroughly. We could use more experienced trainers like yourself these days!

@eddygoodwin7089 2 жыл бұрын

Thanks for the video people don’t throw this information out just anywhere

@rafalpedros7360 2 жыл бұрын

Gives me the confidence to build my own forms. Thanks so much..

@og_bobby_light96 4 жыл бұрын

I’m a 2nd year apprentice local 279.. & this was very informative straight to the point, explaining everything that we need to know thanks brother

@curtwarkentin6167 3 жыл бұрын

Excellent video. I spent a few years in concrete forming and this covers a lot of the basic stuff we used day in and day out. Great demonstration to. I find most guys learn visually in the field seeing this stuff set up and you demonstrated it well (minus the mud and colourful language I’m used to lol).

@tomoreilly1808 4 жыл бұрын

Excellent video, great use of terminology, very clear. good job

@stranger1907 3 жыл бұрын

Ed is a great teacher 👍👍

@sonofman8262 Жыл бұрын

Thanks Mr Stanley good day of school

@artgonz2034 3 жыл бұрын

Best video I’ve seen! Very helpful explains and shows you, now I know the actual name of the tools lol

@4funksakes 3 жыл бұрын

Thanks man alota guys go in knowing nothing i send them here cause this is the best ive seen yet you sir are now a legend.

@JohnDoeWesside213 4 жыл бұрын

Hell yeah bro..thanks for the cletcha..local 213 Concrete city... Love what im learning..love what I joined 🔨.

@mikeortiz568 3 жыл бұрын

I remember taking these required classes back in the day. Bridge forming certification was cool too.

@danny4866 4 жыл бұрын

Great video! Very informative. Wish you had more, taking it further like adding in another section for a 50' retainer wall.

@edgonzalez186 2 жыл бұрын

Wonderful! Nothing less.

@brodeesmith 3 жыл бұрын

OUTSTANDING VIDEO!!!!! OUTSTANDING

@josegarcia2950 2 жыл бұрын

Right on brother, from the your brother 1503 concrete carpenter

@juniorpink1021 3 жыл бұрын

excellent teacher.

@jeffmatthews9125 2 жыл бұрын

Thanks for the info! Great video!

@the3ditorial 4 жыл бұрын

We need more of these!

@user-bt2wv1rm3c 4 жыл бұрын

Thank you for this video.This is really useful.

@user-ju7es7ou5n 4 жыл бұрын

This was in my recommended so I had to click. LOCAL 157 NYC CARPENTER AND PROUD OF IT TOO WORKED MY BUT OFF TO GET TO WHERE IM AT TODAY- Chris Alvarez 💪🏻

@jamesfoster331 3 жыл бұрын

Excellent video learned alot from you.

@thegreatcomm Жыл бұрын

Thanks, Ed!

@JLSMultiMediaSD 5 жыл бұрын

This video was for Ed to show just the hardware used for the wall forming project. If he makes another video I'll have him show how he does his projects from start to finish.

@kbb6279 4 жыл бұрын

Thanks! Really informative. Great video!

@ericforeman5466 2 жыл бұрын

Would really appreciate it. This was really good man!

@yoshisatoshi3206 2 жыл бұрын

Great video ! Thank you

@firstgabion7741 4 жыл бұрын

very useful info, thank you Sir

@dilipanthonypinto1620 3 жыл бұрын

Nice demo!

@tedaston2015 2 жыл бұрын

Excellent! Thank you

@nathanmcintosh2658 4 жыл бұрын

Always learning!

@wallace678678 4 жыл бұрын

The best education videos thank you very much you have a great day too

@traviesobss 2 жыл бұрын

You’re my hero!! Thank you

@nationalelectric6507 3 жыл бұрын

VERY GOOD job on your video.

@MegaBobtube 5 жыл бұрын

We need all those stuff you mentioned if we are planning to be builders/contractors who have another project to me or planning to be professional builders.

@johnnygstring3414 4 жыл бұрын

5th period from 714 great job thanks for the video

@japarudinjaparudin4228 2 жыл бұрын

The extraordinary Vid, i really got hot to this content of video. I really appreciated, this kind of vid is what i have been looking for during this time coz it will help me at jobsite sometime. Thanks

@marcosantillan4452 3 жыл бұрын

Thanks sr...for education and information...

@user-hd5dq4zi2h Ай бұрын

Thank you so much! Very need all carpenters experience

@pdiddy4292 5 жыл бұрын

Awesome vid,thanks for the insite

@brandonhenderson3669 3 жыл бұрын

Only thing I see that I think matters is plumbing the wall from the face, instead of the wailers. You could push the 2x4 turnbuckle to push against the plywood while nailing to the strong back for additional support but the leveling is the main one for me lol. Love the video though! Very informational.

@viniciofajardo 8 ай бұрын

Good work

@user-ng2mt2yr1t 2 ай бұрын

As a concrete finisher in the union I went through a 4-year apprenticeship program and working on the jobs with the Carpenters I became a carpenter and I was a part of 2375 before they change to what they are now in Southern California and let me tell you you're going through a for your apprenticeship program pays off you learn a lot more detail I believe and you punish it program then you do working for somebody that doesn't do that

@Manueljunior_chino1 2 жыл бұрын

Excelente thanks sir very helpful video

@julianbautista2666 Жыл бұрын

this is great, thank you sir

@Robert52700 3 ай бұрын

Thanks Ed

@debing 3 жыл бұрын

Muy bueno!!!! Thank You.

@casgtmutt 3 жыл бұрын

Very informative video, but I'd like to add that it might be better to use 4x4 and 2x4 for your uprights/strongbacks since it would allow the wedges to cover more surface area instead of sticking out 2 inches on either side. Also, the ends of the snap ties are nearly maxed out on the wedge and might not hold up against the pressure of concrete.

@rockystone7949 2 жыл бұрын

THANK YOU....THANK YOU....THANK YOU......ON YOUR 2X4 VERTICLE STRONG BACKS.....YOU DID NOT PUT 16 PENNY NAILS IN THE 2 2X4S TO JOIN THEM TOGETHER WITH THE SNAP TIE ROD IN THE MIDDLE......ALSO IF YOU ARE NOT USING THE METAL CORNER BRACKET.......ONE 2X4 COMES IN THE CORNER UNDER THE TIE ROD....THEN THE OTHER 2X4 COMES IN ABOVE THE ROD......BOTH ENDS ARE EXTENDED......NOW YOU CAN PUT 2 16 PENNY NAILS DIRECTLY AT THE OUTSIDE CORNER OF THE PLYWOOD.......NOW FINISH THE OUTSIDE CORNER FORM WITH STANDARD LOG CABIN STYLE.....I WAS A UNION CARPENTER 50 YEARS

@angelvillalba17 2 жыл бұрын

Thank you you helped me alot🙏

@DUDE72341 Жыл бұрын

Thanks ed

@lowflynn1789 4 жыл бұрын

This guy needs his own channel teaching

@VonFowler-fw3yh 2 жыл бұрын

Would like to know more about panel construction. Good video, thanks

@rickyramos3432 3 жыл бұрын

Overall good video, hammers down. Now all we need is a smaller scale video showing how to stack sheets double wailers etc.

@sdrammm696969 5 жыл бұрын

Thank you

@RonKJeffries 4 жыл бұрын

A first rate tutorial. I've looked at my share of videos to learn what I need to build forms for a retaining wall. Yours is crisp and clear and explains the (confusing to a newbie...) terminology. One question: is OSB OK for form walls? Assume so but you don't mention that detail. A++

@viniciofajardo 8 ай бұрын

Thanks for help

@antoniosmith2200 Жыл бұрын

Yes,it is a video that show an demonstrat through out the video

@japarudinjaparudin4228 2 жыл бұрын

How to set out or mark out t cone of snap tie so that all the snap tie that we install/applied would be the same in size or position? So it looks good.🙏

@Brother-Beto4839 4 жыл бұрын

Your awesome

@charlietanner6211 4 жыл бұрын

nothing beats union made

@ROBBIETHEMANGATSON 4 жыл бұрын

I never nail the hair pins and I make sure none of the guys I’m working with does either, it’s way more tedious to strip? I just put a 16d nail at the top and bottom of the strong backs and a vibrator will never shake that apart

@QF756 2 ай бұрын

I subscribed

@goldbuttoutdoors7634 4 жыл бұрын

I work commercial construction this is definitely not how we build we only use single wailer system for radius walls. Generally you have a corner lock for outside corners out of 2x4 because that's way too many pieces and takes longer to strip and you stagger wailers so you can run your wailers 1ft past the corner on both sides you have to vibrate this as well so your going to have movement you should fan brace corners.

@briancunningham1120 6 ай бұрын

He did show how to brace the outside corners , one extra piece of 2x4 is better than one piece missing

@mastercreamer1398 4 жыл бұрын

Thank you for the video sir! Is that the ontario training center? That’s where I did my apprenticeship school.

@n.elosangeleskennels9062 4 жыл бұрын

I loved everything except that hammer

@FAHRENHEIT451JL 2 жыл бұрын

All i can hear is Adam Sandler waterboy!! Correct me if I'm wrong but thats a sweet louisiana accent

@vitaliypro8441 2 жыл бұрын

With today’s lumber prices this system becomes quite expensive. I ended up renting steel ply forms instead and saved money and whole lot of time

@mylesfarias9 Жыл бұрын

How do you secure turnbuckle to the floor on concrete foundation?

@briancunningham1120 6 ай бұрын

Tapcon or better concrete fasteners, no remset type because of damage to a finiched floor

@javiergomezlicona9059 2 жыл бұрын

WOW

@tomrockroads2123 2 жыл бұрын

Awesomeness what’s going on

@tonyl4571 2 жыл бұрын

Let's say I would have to build a form withouy engineering specifications. How do I choose if I want to go single waler or double? Also, are there rules of thumb for the center center spacing of the 2x4. Thanks.

@pocoyobatista9949 Жыл бұрын

16 inch oc for 2x4 and depends on the thickness of your plywood

@user-yr4os6jz4r Жыл бұрын

I live on solid rock I want to form up a concrete wall 4 ft high and 135 ft long. What size does my footing need to be in width and thickness?

@JoshHeil-wd6sh Жыл бұрын

Is OSB sufficient for a one time use or do you recommend plywood?

@christopherwong9576 27 күн бұрын

Talofa Ed !

@ArqitectTV 2 жыл бұрын

In the real world, the floor isnt made of wood. I usually put the turn buckle at the top and a stake in the ground. #1207

@La7p Жыл бұрын

When he said other names that cant be mention for a hair tie i lol that

@jefftaylor6487 5 жыл бұрын

It would have been nice to see the entire process from the placing of the wafer board upright, through to the bracing. you don't get a sense of how you initially start

@ericbeder1419 4 жыл бұрын

1: layout walls both sides 2: secure 2x4 to outside wall lines including ply thickness to the wall, every 4' 3: start in corner with ply plumb up corner both ways(use wedge if needed to keep in place out side of wall) 4: nail corner to 2x4 then nail end of ply when plumb 5: next ply toenail top to old ply plumb up end and nail bottom 6: temp brace after 8' to not let it fall over, layout holes 2' x2' usually starting 1' up 1' over 7: inside corner holes on outside form wall thickness +9" (for hardware ) drill holes 8: work from corners to center of wall length cut 1 filler ply to finish wall form 9: put in ties, walers, and clamps overlapping waler ends to be a continuous waler

@briancunningham1120 6 ай бұрын

good job Eric@@ericbeder1419

@geraldfranci6821 4 жыл бұрын

Can the corner look used on the inside face of the form

@rodm5830 4 жыл бұрын

Holy cow it must take weeks to build a wall with this system. When I was working on a foundation crew we used the simplex forms. Building track homes in the 70’s we could strip set and pour one wall a day. Wow the amount of lumber it takes to build with this system is amazing. What a monumental waste of time, materials, and man hours. Oh wait, you're union, never mind. Great informative video though.

@395glen 3 жыл бұрын

Yea ok because somehow union workers don’t work as hard. Please I’m union local 70 carpenter and we use this system but then again we are not scabs building simple little house we are a dedicated team building America’s infrastructure including high rises, bridges, parking garages, you name it. Not a quick turn around home with just a small pour

@395glen 3 жыл бұрын

@Sun Chaser 78 yea my comment was directed towards the other joker but I can see how it can be misdirected. There is a misconception out there that somehow union workers don’t work as hard or are lazier, take more time doing things but that is not the case. I work hard and earn every penny every single day I’m at work

@216Numbskull 2 жыл бұрын

@@395glen Right On Brother! "Kickin' ass for the working class." You don't have to defend anything on our behalf my friend. The proof is when they look to the sky everyday & catch the skyline tops that block their view over their city. I double dog dare any one who begs to differ. Let em' hold on to a tagline & swing on a beam for an hour at 50 stories high in the sky in open air & connect just 1 beam with me? Then they can talk sh!t instead of sh!tting themselves? Blah,ha,ha!!! "UnionProud!" Ironworker Local-17