WALLS in AutoCAD Architecture 2023

Рет қаралды 64,731

Күн бұрын

🎓3D Modeling With AutoCAD Architecture course:
learn.tdvisionuniversity.com/...
🎓Views, Annotations and Sheets with AutoCAD Architecture course: learn.tdvisionuniversity.com/...
---------------------------------------------------------------------------------
ALL EPISODES:
• 5 THINGS TO KNOW! Befo...
---------------------------------------------------------------------------------
This is episode 04 of the One Bedroom House series, showing you how to draw a small house "From Start To Finish". My hope is that you will learn the fundamentals so that you can apply them to your own projects.
In this video, I will be showing how to identify the correct wall type, and implement it into your project. I hope that you learn something from today's video.
Thank you all for watching and sharing.
Give it a like, and subscribe! Oh...drop a camment too!
TIMELINE CONTENT
0:00 - Intro
0:42 - Lesson
2:15 - AutoCAD Tutorial
16:11 - The End
---------------------------------------------------------------------------------
**RESOURSES**
⭐See full playlist here
• AutoCAD Architecture 2...
⭐Download PDFs: One Bedroom House
mailchi.mp/956dd1eb9ccf/one-b...
⭐ Join this channel to get access to perks:
/ @tdvision_u
⭐ Or join my Patreon Page:
/ tdvision
---------------------------------------------------------------------------------
#OneBedroomHouse #AutoCAD #Architecture
---------------------------------------------------------------------------------
GEARS I USE:
kit.co/TDVisionU
FOLLOW ME ON SOCIAL MEDIA:
linktr.ee/tdvisionu
CREDITS:
Music: KZfaq Audio Library (free audio)
Information on CMU Blocks: www.archtoolbox.com/materials...

Пікірлер: 114

@OvO-OvO1 2 жыл бұрын

Words cannot express my gratitude enough. Thank you so very much. From South Africa!

@janinemika7784 2 жыл бұрын

Thank you! Loved the dimensioning tips!

@bryanbobbitt401 2 жыл бұрын

Awesome videos! I'm really grateful you shared.

@dillionwilliamson3329 Жыл бұрын

Thank you for these videos I really do enjoy the working your doing keep it up 👍👍👍👍

@egertondidikallay9449 Жыл бұрын

Hey Bro. I thought jamaicans could only run and sing. Your channel is massive bro . Loving it to the max, all the way from Sierra Leone. Learning so so much. Huge thanks

@robertclementi9347 3 жыл бұрын

ive learned more with these 4 videos then i did with autocad atchitectural fundamentals. very cool

@N_Natalie_ 3 жыл бұрын

You make learning autoCAD so easy! Thanks for your videos! They are really detailed and super helpful!

@SochiSkylane 7 ай бұрын

Excellent!

@kyngnaldo 3 жыл бұрын

Nice Video bro, very helpful for my BMED project.🇯🇲🇯🇲

@LiPvrsa Жыл бұрын

Man u helpin me so much please keep it up thanks for everything ❤

@jasonwhyte4044 4 жыл бұрын

great video, straight to the point. keep up the good work.

@TDVision_U 4 жыл бұрын

Thank you! I will.

@svvelanautica2374 Жыл бұрын

Good work! Thanks for your videos. its a good help.

@samsonseyi7062 2 жыл бұрын

Thank you for your effort 🙏 👏

@techchanneltv6826 4 жыл бұрын

Very good video bro!!

@delmarbrown4528 3 жыл бұрын

learned a lot from this video thank you

@CaptainNadikip 3 жыл бұрын

Youve got a great personality!! You should be famous!! Thanks for all the help :)

@TDVision_U 3 жыл бұрын

Haha! Let's see what the future holds.

@garnetttaylor9261 10 ай бұрын

You're simply the best Teacher on Autocad

@ryanlewis5543 3 ай бұрын

Thank you for these in-depth videos, they have been really really helping me!

@andrewkatongo8028 2 жыл бұрын

I have to say I'm enjoying watching your videos and they are really helping me in my projects 🤝 But I can't seem to find CMU-6 there's only CMU-10

@nathanwilliams1981 2 жыл бұрын

Great content

@rodgerallen5896 3 жыл бұрын

We have different technique but said result.It all depend whom we learned from.Good job.

@vikaspurule7921 2 жыл бұрын

Thanks sir🙏

@kamranrehman4658 Жыл бұрын

U ARE MY FAVORITE ENGINEER THANK U SOO MUCH FOR VERY USEFUL LACTURE

@mehranganjapour2408 2 жыл бұрын

Thanks.

@engnnabi6064 7 ай бұрын

you're a great teacher naturally bro

@maingijac 7 ай бұрын

Thanks bro, very simple language everyone can understand ❤❤

@robbiogear597 8 ай бұрын

nice

@vikaspurule7921 2 жыл бұрын

Thanks sir

@CarlWatsonDECKK 2 жыл бұрын

BREDDA YUH NUH NAAAMAL! Much thanks and many blessings to you Sir

@TDVision_U 2 жыл бұрын

Bless up bro. Respect man.

@naszulthorin2695 3 жыл бұрын

my best tutor

@romarriorumble345 3 жыл бұрын

Big up me boss🔥🔥🔥🔥

@jillianchandler5576 11 ай бұрын

what type of wall type would you select for barndominium, stud and drywall?

@NeilHarwood-qc5en Жыл бұрын

GREAT vids many thanks could you do one on aligning and joining different wall types.Seems very difficult compared to Revit???

@TDVision_U Жыл бұрын

Its not that difficult. I will add that to my list of to-dos.

@connorbrownarchitecture 10 ай бұрын

How do you pivot the camera to move so smoothly in perspective at 15:40?

@andihernawaty6546 3 жыл бұрын

good....

@moinuddinkhan6215 3 жыл бұрын

Hi, I reached till Ep-4 by now. it is really nicely explained. Just a question that can be make our own type of wall if it is not there in the library. this goes for all other elements such as beam of different cross section etc.

@TDVision_U 3 жыл бұрын

Thank you! Yes you can create your own wall styles, as well as other elements.

@MissingPage2 Ай бұрын

Hi, do you have a tutorial that shows us how to cut a section through a 3D model please?

@ferra4g973 2 жыл бұрын

Thanks alot for how you break it down. GOD BLESS YOU, however i have a question, i use a normal wall in the design pallete, not from walls button containing different walls, but seema not to b able to do an import to sketchup.. Walls dont show,, what could i be getting wrong

@TDVision_U 2 жыл бұрын

Check out this video on how to export to your AutoCAD models to SketchUp - kzfaq.info/get/bejne/nNSHpauLx7mdln0.html

@kondwanimbuzi5431 Жыл бұрын

Hello Edward, Kindly make a video in how to paint wall surfaces in autocad architecture

@duncanhutton2134 2 жыл бұрын

Hey im a matric in south africa and i am starting with autocad to get experience and these vids are amazing

@TDVision_U 2 жыл бұрын

That's great! I'm happy you're liking the videos.

@duncanhutton2134 2 жыл бұрын

@@TDVision_U do you have a tutorial on wooden decks my EGD PAT requires a deck and i am doing the PAT on autocad but i am stumped on how to do a deck

@jillianchandler5576 Жыл бұрын

My cursor does not give me a green x when it's centered in an intersection, what do i do?

@moazzumgillani4852 3 жыл бұрын

Thanks mate, your videos are really super cool, Plz tell me that Autocad Architecture is a separate software or is just an added toolset in the AUTOCAD software because I have the autocad 2021 student version and it is not showing me such tool palette. Please guide me

@TDVision_U 3 жыл бұрын

You will have to get AutoCAD Architecture in order to get the architectural toolset.

@melanafm2010 4 жыл бұрын

Amazing..What about classic Autocad 2018 version is the add start wall command work ??

@TDVision_U 4 жыл бұрын

I think so, once you have AutoCAD Architecture 2018.

@rodgerallen5896 3 жыл бұрын

You u r a good teacher,almost as as good as I😅

@TDVision_U 3 жыл бұрын

Haha. Thanks anyways.

@mshahbaz2072 11 ай бұрын

mechanical- piping etc?

@richardoguh7337 Жыл бұрын

How did you draw the porch that is my challenge pls?

@christabelnartey3489 8 ай бұрын

Please I can't seem to import my gridlines into the ground floor. It keeps saying its blocked

@ayeshashafiq4333 2 жыл бұрын

I don't have wall,doors and window tool Palette in 2023 Autocad. How to get this template or wall palette?.

@aguythatsrandom 7 ай бұрын

Currently working on a house where I have two different wall types, but they don't intersect with each other. The way it stays there is odd because it's wrong. There won't be gypsum board on the end of the wall. It will intersect with the other wall. Any tips here because it looks bad on the plan. I've tried searching and going to autocad forums but still nothing. Revit would just intersect the walls no problem. Trying not to give up and figure autocad architecture out. But a part of me feels like just doing this manually, but kind of on a deadline.

@TDVision_U 7 ай бұрын

It is possible. There are a couple of ways to go about it. You can use the _Cleanup Edit in Place_ command to do a manual cleanup. Or, if you want the walls to connect and clean up automatically, you can edit both wall styles by selecting _Edit Style_ , then on the _Components_ tab, ensure the _Priority_ value is the same in both walls. Example, if Wall 1 has a priority of 500, ensure that Wall 2 has a priority of 500 as well. Wall components from Wall 1 and Wall 2 with the same priority will merge. Also, the lower the priority value, the more likely for that wall component to cut through other wall components. A good rule of thumb is to make structural components have smaller value (ex 500), and finishing material/components with larger values (1000). Revit has a very similar principle. It's just that folks don't know where to find it in AutoCAD Architecture, yet. Fingers crossed, I will do videos on topics like these in the future.

@aguythatsrandom 7 ай бұрын

@@TDVision_U Ah okay thanks!! Shortly after writing the comment, I did find the manual cleanup, but find that it works only in certain situations. I will look into the other solutions you mentioned later on today. Surprisingly enough with Revit, I find building components to be way better than auto architecture so far. Walls for example. All that offset stuff, etc. Revit, just plops wall components and keeps it pushing. Materials are easy to find for showing, etc. Like I put Arch shtake, and it doesn't show in 3d view for some reason as the hatch although I selected it. The brick portion shows, but not the wood. This will be fun to figure all out, but a stressful fun. Thanks again!

@jpm9431 3 жыл бұрын

Hello, Wonderful tutorials ... I have two questions. 1 How to create customs doors and windows? 2 / How to create customs walls? Thanks u so much from west-indies too.

@TDVision_U 3 жыл бұрын

Most definitely! I do have those on the list so stay tuned for those. Good to have another neighbor in the house! Thanks for watching man!

@gilcstf Жыл бұрын

Hello everyone, The width o my CMU-6 wall is set at 152.40 meters, which is way out of proportion. Can anyone help on how to fix it?

@krishamilton4778 4 жыл бұрын

Because of the student version I was unable to get CMU-6. But I saw that you use centered justification but when I do I end up getting 4" off the exterior measurement of any project drawing. What is your advise on me having proper measurement.

@TDVision_U 4 жыл бұрын

If u are using the regular/standard wall, you can change the width of it to 6" in the properties tab. Let me know if it worked.

@kathywoodall7542 4 жыл бұрын

@@TDVision_U The method of adding a wall which isn't shown in the palette, cmu-6 in this case, does work in the student version. I had to add 6" stud walls for my drawing.

@TDVision_U 4 жыл бұрын

Are you saying it does, or doesn't work?

@adjeigrace4942 2 жыл бұрын

Please in metric what scale should be used because when I xref the grindlines into the ground floor it is too large for it. In the grindlines the scale is 1:100_1 when I make it 1:100 it becomes very small. Please help out Thank u

@TDVision_U 2 жыл бұрын

So go back to your grid line construct, highlight all gridlines, right-click, go to Annotative Object Scale, click Add/Delete Scales, then add all the scales you think you will be using through the project (for example 1:10, 1:25, 1:50, and 1:100), then click OK, Save, Exit. Then open your ground floor construct and see if that works.

@kashifali-wc3jz 3 жыл бұрын

Plz can you upload video on tool palets with all details.how we creat our own tool palets?

@TDVision_U 3 жыл бұрын

I will add that to my to-do list.

@samuellando7458 3 жыл бұрын

I am doing this project for the second time just to recap and in this chapter, my walls when seen in 3D come as plane dark green walls (The layer colour) instead of the brick walls pattern. Can I get help with this please?

@TDVision_U 3 жыл бұрын

🤔 Sounds like you selected the wrong wall type? Double check. Or you're on shaded mode, rather than wireframe or hidden.

@markloveable1 3 жыл бұрын

i work in AutoCAD but there are thing that i need to learn you just show me thanks

@bama6682 2 жыл бұрын

Thank you for all you are teaching. I have AutoCAD 2023, not the architecture. Your tools are supposed to come with 2023 version, I searched all over the place but cannot find the tools you are using. Can you please let us know how to find them?

@TDVision_U 2 жыл бұрын

You have to install the Architecture or MEP version of AutoCAD.

@josiphemerijckx 3 жыл бұрын

For some reason the Wall tab won't appear to draw other wall styles/types. I did thick on the box 'all pallets' but nothing happens.

@TDVision_U 3 жыл бұрын

Try using the STYLEBROWSER command.

@PPanone 2 жыл бұрын

Awesome videos! Very good teacher!!!! My questions: 1) Is it possible to work with walls of variable thickness? In the renovation projects hold houses with wall made with stones this possibility would be very useful. 2) Is it possible to define a wall starting from its section similarly to columns?

@TDVision_U 2 жыл бұрын

Yes to both questions.

@PPanone 2 жыл бұрын

@@TDVision_U Thank you! Could you please give me some indication on how to do it? Any tips or tutorials to watch?

@darkwahalexander4259 3 жыл бұрын

Please when I click on the exref overlay the grid doesn't on the ground floor plan. Any assistance sir?

@TDVision_U 3 жыл бұрын

Make sure the grids and the floor plan are on the same level. Also make sure the Global Cutting Plane is capturing everything you need to see.

@sengalive3412 5 ай бұрын

Please, if I want to generate or get a bamboo frame wall, how do I get it?

@TDVision_U 5 ай бұрын

You probably would have to create a new wall type. It will look like a regular wall in plan view, but you'll have to apply a bamboo-like material to be represented in elevation views.

@sengalive3412 5 ай бұрын

@@TDVision_U Can I also use railings and overly heighten them?

@edakaya5358 Жыл бұрын

i love this videos but i cant find some commands on my autocad can u help

@TDVision_U Жыл бұрын

You may need to get the AutoCAD Architecture version. Thanks for watching!

@AnthonyMorales-db2ze 3 жыл бұрын

Hi! I have Autocad Architecture 2021and i can’t find the Design Tool Catalog-Imperial? How can i get it? Please!

@TDVision_U 3 жыл бұрын

Try what I did at about 3 minutes into this video: kzfaq.info/get/bejne/oaepmbGA2MmcY40.html

@AnthonyMorales-db2ze 3 жыл бұрын

@@TDVision_U Hi! Problem solved! Thanks!

@TDVision_U 3 жыл бұрын

Awesome

@ashomgarba869 3 жыл бұрын

Hi, my name is Ashoms I like your videos I can I get the complete tutorials a am beginner.

@TDVision_U 3 жыл бұрын

Thanks you. I'm happy you like the video. For now you can watch all the episodes at AutoCAD Architecture 2020/2021: kzfaq.info/sun/PLyLLcCaRflgCTuP493CZuUOFdMdh-a_jc

@thenext.architect4271 2 жыл бұрын

Hello, how can we create wall blocks to place it on palet tools ??

@TDVision_U 2 жыл бұрын

Are you talking about CMUs?

@thenext.architect4271 2 жыл бұрын

@@TDVision_U Yes

@TDVision_U 2 жыл бұрын

I've never done that but I'm sure these a way. I will look into it. Thanks.

@gregellerbee3497 2 жыл бұрын

How does this differ from Revit?

@TDVision_U 2 жыл бұрын

Not very much

@ziatricwilson3409 2 жыл бұрын

@sudleydavids1744 Жыл бұрын

HI - I HAVE STARTED FOLLOWING YOUR VIDEOS IN AUTOCAD ARCHITECTURE AND JUST GOT STUCK SEARCHING FOR A 270MM WIDE CAVITY FACE BRICK WALL , WALLS IN SOUTH AFRICA ESPECIALLY PORT ELIZABETH ARE BUILT WITH 110MM WIDE AND 70MM HIGH , SO I CANNOT EVEN FIND A BRICK 110MM WIDE AND DOUBLING UP TO FORM A CAVITY WALL . CAN YOU PLEASE HELP SIR , I THANK YOU KIND REGARDS

@TDVision_U Жыл бұрын

You may have to create a custom wall.

@sudleydavids1744 Жыл бұрын

@@TDVision_U txs will try my best