WANPTEK Adjustable Lab Bench Power Supply 300W with OVP and OCP

No video

WANPTEK Adjustable Lab Bench Power Supply 300W with OVP and OCP

Рет қаралды 9,647

Күн бұрын

▶Follow me on Facebook for daily updates: / techtronic9000
⬇️⬇️⬇️OPEN DESCRIPTION FOR MORE INFO⬇️⬇️⬇️
The WANPTEK is an adjustable lab power supply that comes in a compact form and provides very accurate voltage and current adjustments. It also comes with OVP - over voltage protection, OCP - over current protection and also SCP - short circuit protection. Last but not least it also provides two USB ports with quick charge capability.
The power supply comes in several variants so you can check them out here
bit.ly/3OZ1sCr
Also use the code BG9ba45f to get a discount
Consider to join this channel if you want to support me and to get access to perks:
/ @techtronic9000

Пікірлер: 33

@TechTronic9000 11 ай бұрын

The power supply comes in several variants so you can check them out here bit.ly/3OZ1sCr Also use the code BG9ba45f to get a discount

@alanglassman6224 4 ай бұрын

To disable the beep when you change values, press and hold the adjustment knob until you hear a single beep.

@dronecenterrd 11 ай бұрын

Thanks a lot, i purchased one and just as you the only and first thing ill do is deassembly it and put a piece of tape in that buzzer to make it less anoying

@TechTronic9000 11 ай бұрын

The damned buzzer! I need to do that also 😂

@topeye4202 10 ай бұрын

Yess "only" 18 screws and 3pcs 7mm nuts to loose and then put a blob hot glue on this buzzer helps. Just a tape wont be enough ; )

@szabolcs.j 10 ай бұрын

press the output button for more than 5 seconds, that is the system settings menu, you can turn off the buzzer, option 4, search for pdf for more options

@topeye4202 10 ай бұрын

@@szabolcs.j Thank you, but for me it was only way too loud, a little accustic feedback as it is now with the blob hot glue on the buzzer is just fine.

@FiVa83-lv2sk 5 ай бұрын

@@szabolcs.jtried it, no menu available.

@achilleasskkiller2814 11 ай бұрын

Great video! I’m waiting for mine to arrive 👍

@TechTronic9000 10 ай бұрын

Have fun!

@icenlerfirenler329 10 ай бұрын

man i burst it, i was testing a module i needed 24 v for the supplie and 5 volts for the on/off pin i tested first if usb and normal output shared the negative and they did, so i plug it all put 24v to the module and then touched with the usb 5v + the enable pin the module did nothing and the Power suppli died now i press the on button and it chirps the fuse is alright the screen does not turns on i dont know what happened OCP was on, does the control board has any protection? or it is unrepaiablei opened it and all looks good and there was no magic smoke either.

@filipors_sk3161 11 ай бұрын

great review

@TechTronic9000 11 ай бұрын

Thank you, I'm glad you liked it.

@user-gj5su5er2z 5 ай бұрын

how much did u get it

@JomaStream 9 ай бұрын

What is the purpose of the menu that appears when you hold down the out button? There is nothing in the user manual about it...

@TechTronic9000 9 ай бұрын

Yes, it seems it has a secret menu with various settings from which you might be able to disable the annoying beep, but there is no official info. You might be able to find some info about the settings from the other wanptek models.

@JomaStream 9 ай бұрын

@@TechTronic9000 Thank you so much!

@BigRalphSmith 7 ай бұрын

If this is the 300W model as it says in the title of the video and it's set to 30V, it should output 10A, not 5A. "Watts" up with that?

@MartinVisser 7 ай бұрын

You can see in the video that the label shows the model TPS305 (which is the 30V 5A model). They also make a TPS3010 which is 30V and 10A so 300W

@BigRalphSmith 7 ай бұрын

@@MartinVisser And yet, both the box in the video and the title of the video indicate 10a and 300w. Either way, they need to get it right.

@MartinVisser 7 ай бұрын

@@BigRalphSmith No big deal I think - there are multiple models in the range on shopping sites, and I'm sure are very similar apart from those limits.The main thing I wanted to get out of this users video was how the unit operated.

@abdulazizbinsaleh4730 2 ай бұрын

Is it good for power injection ? I already buy one and waiting for delivery 😅

@TechTronic9000 Ай бұрын

I think that it will do fine.

@darrencain7628 9 ай бұрын

Is it possible to disable the annoying beep on every twist of the dial ?

@alitopcu9220 9 ай бұрын

Yes it can

@TechTronic9000 9 ай бұрын

You should check the manual, mine doesn't have an option to turn it down, although I have found some info regarding WPS3010H model, "you need to press output button for 5 seconds to put the power supply into 'system settings' mode, then press the voltage knob multiple times until you get to program 4 (buzzer mute), and then change the value from 1 to 0 by rotating the voltage knob." I will later test this also on my model and see if it will work or not.

@kyrtgr7573 6 ай бұрын

@@TechTronic9000 So, does it have the option to mute the buzzer?

@wrongsideof40 2 ай бұрын

@@TechTronic9000 Thanks for the video. I've just bought one (the 30V/5A version) and it looks ideal for my needs. The beeper is far too loud so I followed the procedure above to mute the sound. This procedure does work, but the PSU defaults back to 'beepy' mode when next switched on. If you want the mute setting to 'stick', after changing the buzzer mute setting from 1 to 0, press the voltage knob three more times to quit out of the menu. Then all should be well. Does anyone know what the OTHER menu settings alter? Thanks again.

@ingbrzy Ай бұрын

@@wrongsideof40 I have TPS3010 model.. to turn off beep sound when changing V/A I have to press the rotation knob for 5s.. but it still beeps when turning ON/OFF the device.. I am not able to go to the settings menu by long press OUT button..