Want a GT Kush Wide as your front pad??

Рет қаралды 4,779

Жыл бұрын

What's up Onewheel Fam. I recently swapped out my stock front sensor pad for an aftermarket sensor. By doing that, it gives anyone the ability to use a different front pad on their Onewheel GT. I deviated from the norm of sticking the sensor to the front pad. I have seen a few posts of people sticking it below the pad and I wanted to give it a try as well.
So far I have had no ghosting at all. I have had a few false starts though. I have experimented with using foam tape on the side of the sensor thats more difficult to activate. The foam tape closes the gap between the foot pad and the sensor, which makes it more sensitive and improves engagement.
Here is the link for the Aftermarket V2 sensor from Stokedsock.com:
www.stokedstoc...
Here the link for the GT Kush Wide:
thefloatlife.c...

Пікірлер: 47

@beastcoastrepairs

It is now 7/17/24. I look back on this and can’t believe how horrible this idea was haha. It was just the excited of trying the first aftermarket sensor and using a different front door pad. Things have evolved since this post. PLEASE do not do this!!!

@RealMikeDobbs Жыл бұрын

Ayyyyyyy - nice job Sensei 🤙

@pcysneros

Finished the install, thanks for your video... only one issue the kish wide fit a little weird on the WTF rails for the GT... but pushed it to fit 😅😢

@homegrownstoke18 Жыл бұрын

Great video! Thanks for putting this out there!

@JR_69420 Жыл бұрын

Found the aftermarket sensor (v3) online... thanks for the tutorial

@Trees530 Жыл бұрын

you should make a follow up video on how it’s going and if it’s worth it also it would look sick with the new 64s colors I want to do this with the purple ones but i want to make sure it’s worth it before i do that with my own money and my only gt❤

@slothsride7556 Жыл бұрын

Kool, thanks for the video. Have tried putting it on the footpad, under grip yet? If so how does that perform?

@bugs.floats Жыл бұрын

Amazinggggg 🤙 stick sure start on there and it'd be perfectttttt

@LexxD3 Жыл бұрын

Does it make more sense to place the sensor on the pad instead? Under the grip tape?

@Reedith

How did this end up working out? Because I'm really concerned about the spillage of the sides of the sensor, over the sides of the controller box, where the. Gt Kushpad. Has a molded shelf that will pinch that down?

@Ktreez420 Жыл бұрын

Is that a sticker on your wheel hub? I love the sunflower!

@mikeduke3918 Жыл бұрын

I'm all about DIY but if you aren't I suggest just buying the Platypus footpads from Land-Surf. Very similar to a Kush Wide and the sensor is built into the front footpad, plug and play.