Build it the USA. Assembly video for Hud-son Warrior XL sawmill. With this portable sawmill there is no welding. Just a few tools. It has a 36" Log Capacity and built with 4 Post Lift Tubes for strength and accuracy when cutting 36” diameter logs. New extra durable all metal guards. Extra large 19" band wheels for cutting thicker timbers. You can order assembled or unassembled to help meet your needs and budget.
www.hud-son.com/product/porta...
Chapters:
0:00 Intro
1:54 Installing the Winch Frame
3:06 Installing the Lift System
3:48 Installing the Double Pulley System
5:28 Installing the Eyebolts
6:27 Installing the Winch Cable
8:30 Installing the Second Cable
9:56 Installing the Track Wheels & Kit
12:30 Installing the Track Stops
13:24 Installing the 2” Off Deck Bolts
14:18 Installing the Bearing Adjusting Bolts
14:45 Installing the Main Bearings & Band Wheels
16:26 Check Wheel for Plumbness
17:25 Set the Set Screws
18:19 Installing the Drive Side Main Bearings
21:25 Counter Sink Bearings
23:28 Check Band Wheel Alignment
24:03 Installing the Zerk Grease Fittings
25:18 Mount the Blade
28:10 Installing the Tensioner Bolt
29:24 Adjusting Locking Bolts
30:48 Engine Set Up
31:31 Installing the Clutch
32:45 Installing the Muffler on Motor
33:27 Installing the Master Switch
34:16 Mount the Engine to the Sawmill
37:00 Install the Drive Pulley
39:09 Install Drive Belt
40:11 Install the battery
41:56 Install the Fuel Tank
45:13 Installing the Plastic Caps
45:39 Set Offdeck Distance
46:03 Installing the Guide Bars
46:49 Installing the Measuring Bar
48:11 Adjust the Lift on the Cables
49:45 Installing the Blade Guides
52:10 Installing the Guide Shoes
53:37 Installing the Lube Line Kit
55:48 Installing the Top Blade & Wheel Guards
58:01 Installing the Measuring Tape