WARTHOG Chassis Kit for the SCX24 - The Ultimate Performance LCG Chassis Kit?!
Рет қаралды 41,240
Күн бұрынIn this video I review and install the SKP Engineering WARTHOG chassis kit for the Axial SCX24. This legendary chassis is arguably the lowest of the LCG chassis kits available for the SCX24, and boasts tremendous performance gains as a result. Utilizing a compact and innovative 3D printed design, this is not just a functional chassis, it is also extremely cool looking! The kit comes with components to support two variations: brushed and brushless. I opt to install the latter, and pair this with a full Furitek system. Is this chassis the ultimate cheat code for the SCX24?! Watch to find out!
Get your Warthog chassis here, and use code CAPECREW to save 10%: www.etsy.com/listing/10295974...
CineMoto Installation and overview video: • SCX24 Warthog Chassis ...
Custom pit mats here: factoryrchobbies.com/
Other parts in this video
Axles/hexes: amzn.to/3Xsg4eE
OD gears: amzn.to/3YPjqcI
Heavy diff cover: amzn.to/3XGjpqM
Lighter diff cover: amzn.to/3k1J676
Servo: nsdrcscaleparts.com/products/...
Servo mount: www.moforc.com/products/best-...
LGRP Wheels: littleguyracingparts.com/coll...
Furitek components: furitek.com/products/furitek-...
Affiliate links:
Tower Hobbies:
Horizon Hobbies:alnk.to/aLFxP5n
Amain Hobbies:
FairRC: shrsl.com/3w3co
Discount codes
5% off RCAWD: rcawd.com/?ref=E5EBF8Fu - discount code CapeCrawlers
$10 off any order $50 or more: www.fmshobby.com/discount/Cap... - discount code Capecrawlers
10% off the FMS FCX24 Power Wagon: www.fmshobby.com/products/1-2... - code Capecrawler10%
5% off any Injora products: www.injora.com - code Capecrawlers05
10% off any Little Guy Racing Parts products:
littleguyracingparts.com/ - code CAPE10
5% off any Flubberstufferz products: flubberstufferz.myshopify.com/ - code Capecrawlers5
Email me with suggestions or collaboration inquiries: capecrawlersRC@gmail.com
Follow us on Instagram @capecrawlers!
#scx24 #scx24mods #rccrawler #rctruck
@CapeCrawlers Жыл бұрын
Timestamps Close look at the kit: 1:37 Installation begins: 8:14 Finished product and build overview: 10:08 Size comparisons: 15:31 First run: 17:20 Course runs: 18:49 Final thoughts: 26:06
@calekeeler6470 Жыл бұрын
Sent you a pm on Instagram about a product let me know what you think.
@400AGLNET Жыл бұрын
What about 4ws on this beast?
@erinyorke6774 11 ай бұрын
Dose it fit with a eco power servo?
@CineMoto24 Жыл бұрын
I was on the edge of my seat watching this review, glad you are enjoying your Warthog! Thank you so much for the support Adam!
@CapeCrawlers Жыл бұрын
Thank you for the opportunity to try this amazing piece of hardware. You make stellar products!!
@MrMcSnuffyFluffy Жыл бұрын
You deserve a billion sales. Your frame is, by far, the best performer that I own.
@greggrube2948 Жыл бұрын
Beautiful build my friend, another very capable and epic rig. Awesome video Adam 👍😁
@CapeCrawlers Жыл бұрын
Thank you!
@Davidcarnage 8 ай бұрын
I’ve print myself one of these STL that I buy on cult 3-D. Oh man, this chassis is awesome and it keeps people looking at it. This is the greatest ever . Fun fact I love it so much that I leave it on the dash of my car. One day the entire print was heated by the sun and the gravity just bend the plastic. I thought I need to print a new one but you know what it works perfectly it just droped more by the heat. I love it even better. I don’t think you can go lower than that. It was a you successful unpredicted events. Thank you for the great video. I like the quality of what you were doing.
@MrMcSnuffyFluffy Жыл бұрын
This frame is my main car. By far the best performing car that I own. I actually modified the frame and sent it off for sls sintering (it's like 3d printing). My motor had started to deform my frame from the heat, so I needed some better material. I also designed a custom servo tray that has a little open ring on the back of it that I run a limiting rope through, it still allows all of the flex, but the front basically does not lift. I also designed the back a bit differently so I could put the battery on top of the plastic, instead of below. I designed that part of it with a magnetic battery cover that tapers down to the back. Finally, I mounted the front shocks to the inside, as I wanted to keep my turning radius, without an extremely wide front end. It's a beast. (Brushless motor from moforc)
@CapeCrawlers Жыл бұрын
Your build sounds amazing! Great concepts and ideas!
@RcSteve46 7 ай бұрын
I just got my warthog chassis and i love it! Im Running the lizard pro with a mofo rc nano beast and that fits a bit better. Also brass axles and weights so it climbs so good! Thanks for this vid that made me buy it!!
@williamforaker336 4 ай бұрын
I’m thinking of running like the nano bam or something in mine man any advice
@Jack_2752 Жыл бұрын
Loved this video! Sad to see that work mat isn’t used very often, since it’s so cool!
@VS666 Жыл бұрын
LETS GOOOOOOOOOO!!!!!!!!!!!! CAPE CRAWLERS WITH ANOTHER BANGERRRR!!!
@CapeCrawlers Жыл бұрын
Thank you!!
@JayJacksRC Жыл бұрын
Thanks man I love your content so much that is an awesome build!! So cool!!
@CapeCrawlers Жыл бұрын
Thank you, glad you enjoyed it!
@roderickharvey1427 6 ай бұрын
Apologies. I have not liked enough of your videos. I was in a full blown Cape Crawlers marathon while manning my desk. Loved this video. Would love to see a build list. But no worries. Your explanations are great and your builds awe inspiring to me . Please keep up the great work. Much Respect.
@CapeCrawlers 6 ай бұрын
Thank you, much appreciated!
@frogslayer4849 Жыл бұрын
Been running tenth scale for years now. Just breaking into 1:24 and after watching your video i ordered a fms K5. Be seeing you around and thanks for your videos!
@CapeCrawlers Жыл бұрын
Awesome, have fun!
@snorrevonflake Жыл бұрын
Love the simplicity, stock shocks without springs, nothing too fancy (well apart from the motor) compared to others and performs like that.
@CapeCrawlers Жыл бұрын
I agree. It's function over all else. Very fun project!
@scxcrawlerbeast 9 ай бұрын
I’ve made one as custom. Brushed with ASX24 , the battery in front from Motor and 4WS. it was nice
@sugatooth Жыл бұрын
What a nice build! I honestly thought you had replaced the bronco body with this, but I’m happy that the red bronco lives on!
@CapeCrawlers Жыл бұрын
Can't get rid of my red hard body!
@boopernator Жыл бұрын
I am really enjoying my Warthog, but now I want that Furitek Motor ESC combo real bad. Nice review I enjoyed watching this.
@CapeCrawlers Жыл бұрын
Glad you enjoyed it! I love the warthog. It's one of my favorite builds for sure.
@MauzyrockRC Жыл бұрын
What a super build!
@jonathanwebb4551 Жыл бұрын
Would be interesting in seeing what the weight bias is on some of these amazing builds. Love your videos, keep up the great work!
@CapeCrawlers Жыл бұрын
Thank you! I am going to get a 4-point scale very soon. It will be great for tuning and perfecting these things.
@JavierFlores-hs2fc Жыл бұрын
Really cool
@rcmakingtracks18 Жыл бұрын
That has to be the best 24th scale crawler I've ever seen. Great job Adam. Um now where is my scx 24...
@CapeCrawlers Жыл бұрын
Thank you, I appreciate that!
@andrewrichey7374 Жыл бұрын
That was outstanding
@stratosamv7119 Жыл бұрын
I will say this thing seems to be the ultimate vertical climber but I feel that on the rocks and over less steep inclines the comp build you made will probably be better. Unfortunately I now know what I’m putting in my birthday list great video.
@CapeCrawlers Жыл бұрын
Thanks for watching! I think you're right. The angled skid of the comp build and bigger tires give it the advantage there.
@andrewrichey7374 Жыл бұрын
Looks so mean sitting there love it
@RCCrawlerz209 Жыл бұрын
Might be something for me to look into, in the future, as this looks very interesting.
@CapeCrawlers Жыл бұрын
It's a great setup!
@RCCrawlerz209 Жыл бұрын
@@CapeCrawlers for sure!
@mattmclaughlin4085 Жыл бұрын
The Caped Crawler strikes again,,,,thanks for sharing
@CapeCrawlers Жыл бұрын
Haha! Thanks for watching!
@andrewrichey7374 Жыл бұрын
That was impressive I like those tires
@REACTIVETERRAINRC Жыл бұрын
*Looks interesting 🤔 wound how it would handle our terrain being so low. Great channel dude
@CapeCrawlers Жыл бұрын
I should visit and find out!
@crocsonletsgo9665 Жыл бұрын
Glad I'm not the only one riding without the body on!
@CapeCrawlers Жыл бұрын
I like it with the bare chassis!
@richardparkiii8355 Жыл бұрын
Sorry, I am going to have to unsubscribe....my bank account can't keep up with all of your amazing builds. It's like Pokemon go. Gotta catch em all! Lol. I am joking, btw....lol
@CapeCrawlers Жыл бұрын
LOL my heart sank when I first saw your comment! Brace yourself, we are just beginning. I've got some amazing stuff coming!
@jonhowland4985 9 ай бұрын
The song you play over the actual build is the same song that DipYourCar uses when they mix their paint
@kylerowley4112 Жыл бұрын
Also, if you find your wheels rubbing on the front shock, if you cut the fake reservoir off of a stock shock, you can squeeze the shock on the inside of the frame rail, thus giving you more wheel clearance. I had +4 axles and mud slingers on old treal wheels and this is what I had to do to get full turning radius. Just my experience, hope this info is useful. 😊
@CapeCrawlers Жыл бұрын
Great tips! Mine rubs just slightly but doesn't bind. If I switch to bigger tires I will definitely have to do one of these things.
@CineMoto24 Жыл бұрын
@@CapeCrawlers Axle extensions also do the trick! Kyle’s method also helps if using stock width!
@jasonhowell9589 Жыл бұрын
Really do like that stellar transmission but I also did find that RC four-wheel-drive has the same one with a 35 turn brushed motor that you can pull off and put the surpass motor brushless on works awesome same thing little cheeper
@CapeCrawlers Жыл бұрын
Good info! I will have to look into that combo.
@CGM2A 2 ай бұрын
Just got my chassis an couldn’t wait so I just chopped the rear gladiator driveshaft
@paulsallas9725 Жыл бұрын
Like your Iron Maiden cape crawlers logo!!!
@CapeCrawlers Жыл бұрын
Love that metal font!!
@scotty2hottie324 Жыл бұрын
Awesome. Love this machine. Mine is ordered and I would like possibly to add 4ws. Any thoughts on that. Good job on the build. Can't wait to get mine and start planning.
@CapeCrawlers Жыл бұрын
Thanks for watching! I've seen a couple with 4WS and they look/work amazing. I am pretty happy with mine as is, but 4WS would make this virtually unstoppable.
@matthewwmullan Жыл бұрын
I have a blue one of these and the one thing I would put on this to improve it like I did mine is 3flow9rc steering link and diff cover skid. It's so low these unique products really help it flow like water over the rocks. I got the injora comp pins on it and they sit higher than the roof.
@CapeCrawlers Жыл бұрын
I'll check those skids out! It must look insane with the comp pins on it!
@TheCcbw 2 ай бұрын
I love the look of this chassis so I had to get one but I have an ax24 which turn out to be quite a different beast, it's gonna take some time but I'll get it. I would add a picture but can't figure out how.
@user-qq2mo1ek2r Жыл бұрын
Loving this ... Epic performance. Can you leave a list of components and links to all the parts please? I may want to go for different shocks in metal so any help on this would be appreciated. I'm in the UK and I don't think we have the same level of product available to us as you guys in the State's.
@CapeCrawlers Жыл бұрын
Glad you enjoyed it! I put some of the links in the description. Beyond that list you'll need the JLU links and driveshafts, skid plate, electronics, axles/housings, shocks, motor, transmission. Most of that can be sourced from a donor rig.
@dangreear8751 Жыл бұрын
Very cool chassis
@andrewrichey7374 Жыл бұрын
I knew I should’ve skipped over instead of stopping and watching 😁😁 just kidding, that is super cool. Just got done working on my trail hunter, I put just the brass rings in the front rims, brass hexes all four corners. I weighed each one the two heaviest in the front, The rings and the hexes because they don’t all four weigh the same, And the to heaviest upfront the heaviest out of those two I put on the driver side front next heaviest passenger side The weight by us stock front 54 and the rear 46, now with the brass rings and hexes front 59 and the rear 41 now to test
@CapeCrawlers Жыл бұрын
Awesome! I just got our T-hunter fixed this evening. I'm excited to start working on it.
@elcusuco5036 Жыл бұрын
HELL YEAHH!! WHAT A BEAUTY 😭😘
@CapeCrawlers Жыл бұрын
Thanks for watching!
@elcusuco5036 Жыл бұрын
@@CapeCrawlers no thank you for making such a cool series!!
@Wroughtxxx Жыл бұрын
I've been running the Warthog chassis for over a year now and it impresses me every time I use it.
@CapeCrawlers Жыл бұрын
It's such a line killer.. amazing.
@imricjames5210 Жыл бұрын
Love that look! Super sick….🤘🤓
@CapeCrawlers Жыл бұрын
Thanks! I'm pumped with how it turned out.
@rcfan1013 Жыл бұрын
You could still mount a body to it if you wanted. I think that would look very cool
@CapeCrawlers Жыл бұрын
I'll think about it. I like the raw look of it as is, but it would be fun to have some options.
@kendietz355 Жыл бұрын
love the warthog color withe the wheels
@CapeCrawlers Жыл бұрын
Thanks! I'm super happy with the combo.
@andrewrichey7374 Жыл бұрын
Wow looks bad to the bone 👍👍 Love the color choice looks mean and ready
@itzkaden_6470 Жыл бұрын
Hey man I love the video and your channel. Is there anyway you could do an overview of your outdoor course I lived the indoor one but would love a video on the rocks
@CapeCrawlers Жыл бұрын
I made one a while back: kzfaq.info/get/bejne/lZddhqR4utG1gZ8.html It’s outdated now so I could do a refresh
@itzkaden_6470 Жыл бұрын
@@CapeCrawlers thanks for the reply! If u do make a refresh I would watch but no pressure
@andrewrichey7374 Жыл бұрын
Yeah that was impressive climbed right up that no problem
@loganb416 Жыл бұрын
You should try out the hot racing oil filled shocks they make stock length ones and they are AWSOME
@CapeCrawlers Жыл бұрын
Oh man, those would be great on this. I'll check them out.
@paulsallas9725 Жыл бұрын
Love the videos. Good 💩
@stoff51nissa Жыл бұрын
salut je suis en France et je suis entrain de monter le mien et tout s assemble sans problème et il est juste trop beau avec son design hors du commun je l adore déjà merci pour vos vidéos elles sont terribles 👍👍
@CapeCrawlers Жыл бұрын
Awesome! Have fun and thank you so much!
@underfeed Жыл бұрын
Im a follower, love your channel, very new to the mini crawlers, spent many a late night watching your vids. Might be a silly question, but what SCX24 did you start with as a base for this build? or does it not matter? Cheers Jeff
@CapeCrawlers Жыл бұрын
Hi Jeff! It's loosely based off of a JLU or C10. That's what Shane (the creator) recommends.
@underfeed Жыл бұрын
@@CapeCrawlers awesome! thanks for the fast reply! all the best
@CrawlDaddyRc Жыл бұрын
🔥🔥🔥
@JunkyardDawgs 3 ай бұрын
Can you make a video covering how to build a 6 wheel drive scx24?
@ay8967 Жыл бұрын
Damn I think I got In over my head here I was excited for trying to build this but now I’m wondering if I will actually be able to make it work. Lol this is going to be my first attempt at building and damn I didn’t realize how much you had to do to make it fit right.
@ay8967 Жыл бұрын
Also what diff size would I get to try and make this build?
@CapeCrawlers Жыл бұрын
You can do it. Just take your time and chunk it down into sections. The axles and diffs are the same as a stock SCX24.
@mzondi1970 5 ай бұрын
I just ordered one of these can you use parts from an extra s e x for the whole build and slowly change out parts as you go
@AddictRC Жыл бұрын
Awesome, should head to head all the rigs, this things crazy small, should’ve compared it to the UBT18 it would a have been a ant compared to ut
@CapeCrawlers Жыл бұрын
It would completely hide away under the UTB18. That would have been a crazy comparison
@rcjoe406 Жыл бұрын
Finally!!!! Hahah hey what's the length on the chassis mine will be here tomorrow soooo pumped....yours came out awesome a green and black one is on my list for sure..
@CapeCrawlers Жыл бұрын
Thanks! I will check on the length. I don't have the measurements on hand
@rcjoe406 Жыл бұрын
@@CapeCrawlers kool..hey check out the lcg hot racing chassis it's carbon fiber similar ride height of the warthog
@lostinature Жыл бұрын
Great video! Not at all a fan of these bodyless frames. (I am really into the paintjob and bodywork part). I get why people are stoked on these builds though. The performance is spectacular :)
@CapeCrawlers Жыл бұрын
Thank you! I prefer that style too, but it's fun to mix it up. This thing has character all its own for sure.
@MrCubflyer 9 ай бұрын
I was going to get that kit but he is charging 14 dollars for shipping which is excessive for a few ounces of parts im just going to print my own but thanks for the great reviews.
@kylerowley4112 Жыл бұрын
That song around the 9:30 mark, What is it! Love those wheels. LGRP?
@CapeCrawlers Жыл бұрын
it is Old Sneakers by Reborn. Yes, LGRP cyclone wheels.
@Jpatton9 5 ай бұрын
Do the holes in the chassis come pre-tapped with threads? And if not do you have a tap set that you have to tap the threads out yourself? or can you just throw a nut on the back of it?
@CapeCrawlers 5 ай бұрын
Yes they did. Some were a little rough but I didn’t have to tap anything
@paulsallas9725 Жыл бұрын
You should play Iron Maiden during the fast forward😂
@DadsRCGaragePNW Жыл бұрын
Your rails were backwards in the beauty shots of the chassis. Lol. Nice kit tho clean print.
@CapeCrawlers Жыл бұрын
It came assembled so I can't take credit for that lol
@dretech Жыл бұрын
Hi Adam, I love the Warthog but can you please give the rundown of your total cost for this build?
@CapeCrawlers Жыл бұрын
Sure thing. The kit was $35, links were $10. Furitek setup was ~$180. Servo was $60. Wheels and tires were $50. Axles, diff covers, hexes were another $60ish. The rest came from a donor rig
@grimmsoul1343 3 ай бұрын
Could I just transfer the links from the axial to this or would I need to use the printed ones have something I thought of for this
@robertphillips6715 Жыл бұрын
Should do rear steer on that rig ..
@CapeCrawlers Жыл бұрын
Possibly in the future! I am going to try portals next.
@kez850 Жыл бұрын
Any idea on when companies might start coming out with replacement chassis for the ax24? Seems like a no brainer since it comes with 4ws stock
@CapeCrawlers Жыл бұрын
I haven't heard about any aftermarket chassis kits for this unfortunately. That's not to say it isn't being developed though. I feel like the demand for parts for the AX isn't up there with the SCX or the TRX4M, so we'll see what companies develop.
@mzondi1970 6 ай бұрын
Do you ever sell any of your builds
@stevefrench3564 Жыл бұрын
nice build, i really need to get the 3d printer going again you see treal has 18g knuckles
@CapeCrawlers Жыл бұрын
Thanks! Yes, I have the big Treal knuckles on some other builds. They wont fit with the big brass hexes, so I had to choose one or the other.
@chrishester2928 Жыл бұрын
Iv got the warthog blk. Thinking of using my C10 build. What do you think
@CapeCrawlers Жыл бұрын
C10 would be a perfect base
@kenstridsberg8078 Жыл бұрын
I'm hoping the brushless motor pieces come With it cause I couldn't find them
@CapeCrawlers Жыл бұрын
They do. They all come in one package together.
@rcjoe406 Жыл бұрын
Out of stock ..mission accomplished 🙌
@CapeCrawlers Жыл бұрын
Shane better fire up his printer!
@rcjoe406 Жыл бұрын
@@CapeCrawlers ya buddy
@shanethornock5965 Жыл бұрын
Do you have issues with the brass Mofo portals binding and disengaging. I am having all sorts of issues with this.
@CapeCrawlers Жыл бұрын
I did on my deadbolt pretty severely but they've been pretty solid on the warthog thus far
@ArmynOverlord Жыл бұрын
I was wondering what is your top 3 favorite 1.0 crawler tires?
@CapeCrawlers Жыл бұрын
1: LGRP swamp kings 2: Proline hyrax 3: RC4WD scrambler
@brianbiro9094 5 ай бұрын
Yup never?seen a motor that turns on the outside l8ke that can i get it 4 my K5 BLAZER ?
@legion2k988 7 ай бұрын
This is awesome and you did great but maybe pull all those pins off and hardwire it. Might save some space.. no need for that huge plug. IDK.. I;m dumb.
@irwan_rc2416 Жыл бұрын
I'm trying to attach this frame to the basher racksta MOA, with a few modifications. Its became a machined gecko
@CapeCrawlers Жыл бұрын
That sounds awesome!
@snorrevonflake Жыл бұрын
While i have started to print this (the seller is offering the files for a small amount) - i was wondering about links, of course i can experiment - would like to hear your opinion about the advantage of the provided links compared to a normal set of low clearance links. Also i have here a stock"ish" deadbolt i might want o convert with this chassis (to avoid buying a fifth scx24) - that would be deadbolt rear and c10 front links - but maybe this will mess up the balance of this chassis that seems to use C10 rear lenght links on front and rear. (Not expecting an answer, just contemplating). Also worrying about big tires touching the shocks or chassis - i dont want to invest into parts to go real wide...
@CapeCrawlers Жыл бұрын
I think a normal set of links may pivot better. The provided ones felt a little tight. My favorite wheel base is the combo you mentioned: deadbolt rear, c10 front, but I don't know what that would look/perform like on this chassis. Some folks have mentioned mounting the shocks on the inside of the chassis to mitigate rubbing. Also cutting off the fake reservoir of the stock shocks for more clearance.
@Wicked_crawlerz_rc Жыл бұрын
Man I need these mini swamp kings baaaaddddd when are they suppose to come out ?
@CapeCrawlers Жыл бұрын
2-3 weeks I believe. They're excellent tires!
@Wicked_crawlerz_rc Жыл бұрын
@@CapeCrawlers can’t wait to put them on my Toyota the trail kings are just a little to big and it doesn’t turn well
@Wicked_crawlerz_rc Жыл бұрын
@@CapeCrawlers I need them on my Toyota the trail kings are to big and it doesn’t turn well. Can’t wait. The mt proline bajas will have to do for now
@scotty2hottie324 Жыл бұрын
Got my warthog in. So, big favor to ask. I'm new in the ax24. If you built this from scratch, would you change anything. I don't have a donor, so I am ordering all new. Or if you were building with all new, what would be your parts list. I want aluminum axles and brushless. Are all the parts needed. Reg ax24 or gladiator etc. I'm asking because I have run into I few issues with the ax24 cx1. Not everything is the same as the other ax24. Or at least it seems. No rush,I know this is a big chunk of your time. I just want to build this epic.
@CapeCrawlers Жыл бұрын
If I were to scratch build it the only thing I would change is the axles. I would run the Injora +4mm axles. I would pair those with brass knuckles up front, and a brass diff cover up front. This setup would allow for less total weight overall and a good bias up front. I am very happy with the shocks, motor, transmission, and rx/tx combo. For components, you'll want to stick with SCX24 parts. AX24 is slightly different as you've already discovered.
@scotty2hottie324 Жыл бұрын
@@CapeCrawlers thank you. I'm also going to build a mobile mini rock coarse on a trailer I have. I do have some pretty good ideas and I may add a feature with your channel on it. Like. Cape Crawlers mountain or something like that. Maybe an entry sign or something. I do appreciate all that you are doing for this hobby and for us noobs. If you have a feature specially that you would want let me know. Plenty of time it will likely not be completed until after summer.
@nickhathaway4617 Жыл бұрын
Awesome 👌 if u get any extra furitek stuff u can't use and want to help someone I'm about 40 mins away lol
@CapeCrawlers Жыл бұрын
I'll keep you in mind neighbor!
@nickhathaway4617 Жыл бұрын
@@CapeCrawlers lol want a furitek combo so bad just tuff times trying to sell 2 rc's now to pay bills. All seriousness only kidding would never expect it Love your videos helps me destress while I'm watching
@reeserides7757 9 ай бұрын
Will this fit the ax24?
@gordonscottrc2561 Жыл бұрын
Wtf.. this is such a cool frickin build... Damnnnnnnn.. there goes my bonus
@CapeCrawlers Жыл бұрын
LOL it's a monster!
@jayf2487 Жыл бұрын
That truck is awesome!! How much you want for it haha
@CapeCrawlers Жыл бұрын
Thanks! I am not ready to part with this beast just yet!
@jayf2487 Жыл бұрын
@@CapeCrawlers is this the olive green color?
@netsspam Жыл бұрын
i feel like i could end up with a higher quality print. but i like the design.
@CapeCrawlers Жыл бұрын
I think he offers the file on Etsy. I've seen others print their own
@Atlas_FPV Жыл бұрын
What song is it around 9:30, I love it ❤
@CapeCrawlers Жыл бұрын
Old sneakers by Reborn
@chad4030 10 ай бұрын
How much does something like this cost? Like the full build?
@CapeCrawlers 10 ай бұрын
This would have been ~$250 I think
@rcjoe406 Жыл бұрын
Hey brother sooo jlu rear links front and rear would give the look you have I have some injora sets I can piece together?
@CapeCrawlers Жыл бұрын
That should do it
@rcjoe406 Жыл бұрын
@@CapeCrawlers kewl
@ericpohlman5131 Жыл бұрын
Would those tires grip better mounted in reverse?
@CapeCrawlers Жыл бұрын
Possibly. I haven't tried. I dont know if my OCD would allow that lol
@cumminscartel1825 Жыл бұрын
Agreed, komodo and micro komodo all day
@VeeSneedles Жыл бұрын
What's up man? You think this could work with fcx24?
@CapeCrawlers Жыл бұрын
I don’t think it would. I know Shane is working on a 1/18 design and I think that could work on the fcx24
@VeeSneedles Жыл бұрын
@Cape Crawlers preciate it, I'll keep my eye out for it. Love the content, keep it up bro 🤙🤙
@royceb1245 6 ай бұрын
Every time this guy stop talking we get a mini ASMR🤣
@anthonynorris7736 Жыл бұрын
Thoughts on a diecast aluminium body on this chassis?
@CapeCrawlers Жыл бұрын
I would be hesitant to do so and jeopardize the LCG benefits of this thing. But if you could do it and keep it mounted real low, it would be awesome.
@anthonynorris7736 Жыл бұрын
@@CapeCrawlers I agree, you would need a long narrow body I would assume. I just think would look very detailed and also keep most of the better crawling ability.
@siekogeorge1 9 ай бұрын
Can I fit a ax24 in this?
@bobbymulwee7641 Жыл бұрын
Have you checked out KILLR CHASSIS?
@CapeCrawlers Жыл бұрын
I've looked at them yes. They are gorgeous and look like they would perform amazing.
@dillaboo16 Жыл бұрын
Do you know were i can get some proline swampers out of stock everywere
@CapeCrawlers Жыл бұрын
Everything looks back ordered right now. ETA for next shipment is in Feb, so I would hope any day now.
@dillaboo16 Жыл бұрын
@@CapeCrawlers i have a set of those already on order but im trying to find the 1.0 as well
@Zytiron Жыл бұрын
I wonder how my AX24 will work with that chassis.
@CapeCrawlers Жыл бұрын
I've seen some 4WS warthogs and they were awesome!
@junelopez9520 Жыл бұрын
When are the tires coming out?
@CapeCrawlers Жыл бұрын
Another 4-5 weeks I believe.
@junelopez9520 Жыл бұрын
@@CapeCrawlers I just had the most incredible time trying to seat a DJ Crawler tire on a INJORA chrome wheel. Took several try’s but I never gave up lol - hmmm I am staying away from the chrome for now
@DrMango-vj9px Жыл бұрын
Can I use this motor in a 1/18 crawler?
@CapeCrawlers Жыл бұрын
You would have to find the supporting hardware like mounting plates, electronics, pinion gear, etc. I haven’t seen a komodo motor in many 1/18 scales. It’s mostly the micro komodo
@SONIC_BOOM_RC Жыл бұрын
You have the NSDRC servos correct
@CapeCrawlers Жыл бұрын
Yes, that's right.
@SONIC_BOOM_RC Жыл бұрын
@@CapeCrawlers how do you like them compared to reefs 99 micro
@AIdeN6636 11 ай бұрын
Would this work for a Trx4m
@CapeCrawlers 11 ай бұрын
It would not, but he is developing a trx4m warthog as we speak
Cape Crawlers
Рет қаралды 25 М.
Scale Builder's Guild
Рет қаралды 61 М.
Cape Crawlers
Рет қаралды 23 М.
Grind Hard Plumbing Co
Рет қаралды 1,1 МЛН
20% nano ceramic tint installed on this brand new Audi S5! FACTORY finish on these frameless windows
Tint God
Рет қаралды 3,7 МЛН
Sigma
Рет қаралды 3,5 МЛН
Music HD
Рет қаралды 3,9 МЛН
Nersva
Рет қаралды 4,3 МЛН