Washer Won't fill? - Top 5 Problems and Fixes - Top-Loading and Side-Loading Washing Machines

No video

Washer Won't fill? - Top 5 Problems and Fixes - Top-Loading and Side-Loading Washing Machines

Рет қаралды 220,579

AppliancePartsPros

Күн бұрын

Пікірлер: 73

@marydeedodge9467 Жыл бұрын

Great videos, really easy to follow. Half an hour to change out my old Capri washer fill valve. So great, thank you so much. Fast shipping, too.

@shelbyhobbs6416 2 жыл бұрын

My washer wasn’t working literally took hose off cleaned filter and now it works!! Thank you soo much !!

@AustinAlimbuyuguen 2 жыл бұрын

Helped me with my washer not filling with water, filter was filled with coins, thank you so much.

@paigehead1404 5 ай бұрын

Very helpful video. My washer pressure switch failed. This video helped me determine that and I was able to fix the issue quickly with a new replacement part.

@appliancepartspros 5 ай бұрын

Glad we were able to help you out. If there is anything we can help you with in the future please let us know.

@timothyboone1181 2 жыл бұрын

Awesome video so helpful. Took about the washer was able to test the solenoids and found out they are fine. I had forgot that I turned the water off to the washer

@mayelagonzalez78 Жыл бұрын

Great video! We were able to fix my mom's washing mashine in just less than an hr. The filter screens were dirty. Thank you, thank you!🎉

@ehart2422 2 жыл бұрын

Thanks for the info. You forgot one though. Water main break outside. Lol . Took my hoses apart, turned on kitchen faucet to clean filters, no water. Water main break.

@falgianibrandon 10 ай бұрын

If you take the water level switch apart inside is a set of points like an old car ignition system. Just clean the points and you’re good to go. Just did that to my washer. Saved me 50$ on buying a new switch

@appliancepartspros 10 ай бұрын

Glad you were able to fix your washer. If there is anything in the future we can help you with please let us know.

@heshamalrubaiaan5225 8 ай бұрын

Excellent video!!!

@appliancepartspros 8 ай бұрын

Thank you! If there is anything we can help you with in the future please let us know.

@user-us2eh4mf5j 8 ай бұрын

Very helpful ,thanks

@appliancepartspros 8 ай бұрын

You are welcome!

@smackiekennedy6604 Жыл бұрын

Thank you, this was very helpful!

@brainwasher9528 24 күн бұрын

Very useful information! I have an AEG Oko Lavamat and it works perfectly fine until the rising cycle when it does not take water anymore and I get E10 error code. I understood that the rising cycle is done with cold water but I don’t understand which part could be malfunctioning. Could it be the main control board?

@appliancepartspros 24 күн бұрын

If you have power going to the cold water valve and no water is entering the machine then the valve will need to be replaced. If you are not getting power to the valve then the control board would be the issue.

@lucruzfigu Жыл бұрын

thank you

@happydayz5321 2 ай бұрын

Great video ! My Whirlpool washer 1CWTW4815EW1, when set on SMALL LOAD automatically fills to MEDIUM or more. It does not overflow of course. I have blown through the pressure hose to make sure it is not obstructed and the hose goes directy to the MAIN circuit board. Will replacing the water inlet valve have any helpful effect on this problem ? It has done this since new about three years ago. Thanks !

@appliancepartspros 2 ай бұрын

It sounds like the water valve is working properly since it is letting water in. If it's not filling up to the correct level and the pressure hose is clear, then you will need to replace the control board. That part is W11305799, you can place that order on our website or you can call us at 1-877-477-7278 to place the order over the phone.

@austinhinkson1414 Жыл бұрын

Great video

@vickvega-fr4ki Жыл бұрын

Good video

@elmop3609 Жыл бұрын

GE Washer GTWP18WOWW Washer is set to Extra-Large load, Heavy washing mode. Water fills to expected level. Washing cycle begins and continues normal until timer pointer reaches the RINCE cycle. The Rinse cycle begins with filling the water to approximately ½ of what was during the Washing cycle. Agitator starts with ½ of water. Agitator starts while water continues filling the Tub for the next 10 sec. then water stops, and the Agitator continues with 1/2 of water to the end of the Rinse cycle followed to Spin cycle. My thinking was that the Water Level Switch is OK because it fills water properly at the beginning of Washing. I have installed a new Timer but issue remains the same. Would you please advise. Thanks in advance.

@littlereds1899 Жыл бұрын

Mines only a month old.. Fills less than 1/4 not even close to cover clothes. Sounds like it whining like motor struggling. Stops fills. Stops whines. I took a bucket n filled up the tub. Idk what to do. Bc Lowe's SUCKS

@ifmenda Жыл бұрын

I found that the problem with the old washer is the same as the exact new one that was provided by the landlord. I take to adding a gallon or so of water weighing down the clothes and fooling the machine into sensing that it has a "full load."

@tereseheinen9632 Жыл бұрын

I have an Insignia Top Loading washer that cleaned clothes very well for 13 months. Now it agitates for 5 minutes before the water goes into the tub. Even with Deep Water selected the tub barely has any water in it. I've checked the hoses and filters - they look good. Next I'll start with the Water Inlet Valves. Thanks for the videos. Any suggestions are GREATLY appreciated.

@appliancepartspros Жыл бұрын

What is the model number?

@tereseheinen9632 Жыл бұрын

Insignia Top-Load Washer NS-TWM41WHBA@@appliancepartspros

@tereseheinen9632 Жыл бұрын

Could water have gotten in the area outside of the drum and be causing the washer to "think" it already has water in it?

@appliancepartspros Жыл бұрын

Can you verify that model number? Not having any luck locating it anywhere. Do you happen to have a multimeter? You can check the valves for the correct voltage.

@tereseheinen9632 Жыл бұрын

Yes, we are checking with a multimeter. Looks like we might need a new part@@appliancepartspros

@normbograham 2 жыл бұрын

i took the cold hose off, and some "sand" was removed with my finger. It's working again. At least "cold".

@francisbrown5974 3 жыл бұрын

Thank you! I will let you know how my repair went.

@daniel-ji4ww 3 жыл бұрын

howd it go?

@francisbrown5974 3 жыл бұрын

@@daniel-ji4ww Good, purchased the meter, took it apart to asses just fine. Easier than it looks. Then the vendor came out and showed me some wires that came loose when the washer was spinning. Now I know what to look for. Your video was most helpful and you're a great teacher. Thank you Dave.

@ethanwinters7829 6 ай бұрын

So my washer is a GE top loader it will fill to the correct amount of water for a wash cycle. Small medium large but on rinse mode it will only fill up to the bottom and that's it. So could it be the water level switch? Or the water inlet valve?

@appliancepartspros 6 ай бұрын

What is the model number of your washer? Have you had any error codes come up in the machine?

@ethanwinters7829 6 ай бұрын

@@appliancepartspros GLWN2800D1ws no codes did show up but I would like to know what could be the problem of why it doesn't fill up all the way on rinse cycle

@appliancepartspros 6 ай бұрын

During the rise cycle when it is filling has it always just filled to the bottom or is this something that the machine just started to do?

@ethanwinters7829 6 ай бұрын

@@appliancepartspros it's always been doing it

@appliancepartspros 6 ай бұрын

The manufacturer has designed this unit to not utilize as much water during a rinse cycle as it would the initial fill.

@bullfrogpondshop3179 2 жыл бұрын

My Roper Washing machine cycles back and forth between hot and cold water (1-2 minutes each) during the fill cycle when the "HOT" water setting is chosen. The result is the water in the filled tub is lukewarm at best. Does anybody know if there is a part or parts that determines the length of these cycles? I'd like to make the hot water come out longer and/or the cold come out shorter to result in true HOT water when the tub is filled. A capacitor maybe?

@marydeedodge9467 Жыл бұрын

I took both my hoses and attached them to the hot water line. No more cold wash.

@PintoSixty 9 ай бұрын

What if the tub only fills half way for a large load?

@appliancepartspros 9 ай бұрын

Have you had any type of error codes come up on the machine? What is your model number?

@PintoSixty 9 ай бұрын

This machine isn't that new. No error coding available. However, in reading more on your website, I think it might be a need to change the water level setting switch. Another question, though: how could gunky filters in the hoses cause the machine to not fill all the way? If you set the level to "large load", shouldn't it fill to that level even if the water is dribbling into the tub, taking, say, 5-10 minutes to fill? The level switch is pressure sensitive not time sensitive, right?@@appliancepartspros

@donnawilliams7570 11 ай бұрын

Where do you get the tech sheets?

@appliancepartspros 11 ай бұрын

Most of the time they come with the appliance. If not you may have to try and reach out to the manufacturer and see if they can provide one for you or try to google it.

@donnawilliams7570 11 ай бұрын

@@appliancepartspros Thank you. I will check it out.

@appliancepartspros 11 ай бұрын

You are welcome. If we can help with anything else please let us know!

@lt9093 5 ай бұрын

I found it at the link above

@barbaraziobrowski8435 Жыл бұрын

My washer is not filling enough to wash the load I have A GE deep fill

@barbaraziobrowski8435 Жыл бұрын

Is their a way to adjust water level to a higher amount

@snoopfurlow1275 Жыл бұрын

@@barbaraziobrowski8435the load selector, such as small, medium,large options on the washer

@sibongisenimpahlwa983 Жыл бұрын

Mine dnt fill water and it shows this error code ,,,, lE and this one dE

@randyp6639 6 ай бұрын

If I fill with a hose it works and drains

@randyp6639 6 ай бұрын

But it won't fill at all

@appliancepartspros 6 ай бұрын

You would be having an issue with the water valve. What is the model number of your washer?

@derrickbailey1499 9 ай бұрын

My machine will fill to any level on warm or hot settings. It will stop filling on cold at medium size load

@appliancepartspros 9 ай бұрын

Have you had any error codes come up on your machine? What is the model number of the washer?

@frankiet5298 Жыл бұрын

The first thing to look at is the bus fuse. If it's blown, the water will not fill. Should be at the top of anyone's list, that is unless you're selling overpriced parts. Geez

@terrygilbertson1600 6 ай бұрын

Where is the bus fuse.?

@user-gd8dv6sq8c 2 ай бұрын

Do u Kno where that's located